The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy
Abstract
Even though the power conversion efficiency (PCE) of rigid perovskite solar cells is increased to 22.7%, the PCE of flexible perovskite solar cells (F‐PSCs) is still lower. Here, a novel dimethyl sulfide (DS) additive is developed to effectively improve the performance of the F‐PSCs. Fourier transform infrared spectroscopy reveals that the DS additive reacts with Pb 2+ to form a chelated intermediate, which significantly slows down the crystallization rate, leading to large grain size and good crystallinity for the resultant perovskite film. In fact, the trap density of the perovskite film prepared using the DS additive is reduced by an order of magnitude compared to the one without it, demonstrating that the additive effectively retards transformation kinetics during the thin film formation process. As a result, the PCE of the flexible devices increases to 18.40%, with good mechanical tolerance, the highest reported so far for the F‐PSCs. Meanwhile, the environmental stability of the F‐PSCs significantly enhances by 1.72 times compared to the device without the additive, likely due to the large grain size that suppresses perovskite degradation at grain boundaries. The present strategy will help guide development of high efficiency F‐PSCs for practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Solvents and Solvent Effects in Organic Chemistry
Reichardt, C. (2002) · Wiley eBooks · doi:10.1002/3527601791 · Cited by 5,789
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Ultrathin and lightweight organic solar cells with high flexibility
Kaltenbrunner, M., White, M. S., Głowacki, E. D., Sekitani, T., Someya, T., Sariciftci, N. S., & Bauer, S. (2012) · Nature Communications · doi:10.1038/ncomms1772 · Cited by 1,757
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Self-citationKe, W., Fang, G., Liu, Q., Xiong, L., Qin, P., Tao, H., Wang, J., Lei, H., Li, B., Wan, J., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b01994 · Cited by 1,228
Two‐Inch‐Sized Perovskite CH3NH3PbX3 (X = Cl, Br, I) Crystals: Growth and Characterization
Liu, Y., Yang, Z., Cui, D., Ren, X., Sun, J., Liu, X., Zhang, J., Wei, Q., Fan, H., Yu, F., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502597 · Cited by 1,123
Self-citationSurface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Self-citationKaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Prasanna, R., Gold-Parker, A., Leijtens, T., Conings, B., Babayigit, A., Boyen, H.-G., Toney, M. F., & McGehee, M. D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04981 · Cited by 893
Tiwana, P., Docampo, P., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2011) · ACS Nano · doi:10.1021/nn201243y · Cited by 814
Copper indium gallium selenide based solar cells – a review
Ramanujam, J., & Singh, U. P. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00826k · Cited by 789
Modeling Anomalous Hysteresis in Perovskite Solar Cells
van Reenen, S., Kemerink, M., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01645 · Cited by 687
High-efficiency robust perovskite solar cells on ultrathin flexible substrates
Li, Y., Meng, L., Yang, Y., Xu, G., Hong, Z., Chen, Q., You, J., Li, G., Yang, Y., & Li, Y. (2016) · Nature Communications · doi:10.1038/ncomms10214 · Cited by 680
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Kim, B. J., Kim, D. H., Lee, Y.-Y., Shin, H.-W., Han, G. S., Hong, J. S., Mahmood, K., Ahn, T. K., Joo, Y.-C., Hong, K. S., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02441a · Cited by 679
Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells
Kumar, M. H., Yantara, N., Dharani, S., Graetzel, M., Mhaisalkar, S., Boix, P. P., & Mathews, N. (2013) · Chemical Communications · doi:10.1039/c3cc46534a · Cited by 650
Zardetto, V., Brown, T. M., Reale, A., & Di Carlo, A. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22227 · Cited by 622
High efficiency flexible perovskite solar cells using superior low temperature TiO2
Yang, D., Yang, R., Zhang, J., Yang, Z., (Frank) Liu, S., & Li, C. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02155c · Cited by 570
Self-citationLeijtens, T., Eperon, G. E., Barker, A. J., Grancini, G., Zhang, W., Ball, J. M., Kandada, A. R. S., Snaith, H. J., & Petrozza, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01729k · Cited by 543
Yoon, J., Sung, H., Lee, G., Cho, W., Ahn, N., Jung, H. S., & Choi, M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02650h · Cited by 469
Yang, D., Yang, R., Ren, X., Zhu, X., Yang, Z., Li, C., & Liu, S. (. (2016) · Advanced Materials · doi:10.1002/adma.201600446 · Cited by 438
Self-citationProgress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Liu, Y., Sun, J., Yang, Z., Yang, D., Ren, X., Xu, H., Yang, Z., & Liu, S. (. (2016) · Advanced Optical Materials · doi:10.1002/adom.201600327 · Cited by 412
Self-citationLiu, Y., Zhang, Y., Yang, Z., Yang, D., Ren, X., Pang, L., & Liu, S. (. (2016) · Advanced Materials · doi:10.1002/adma.201601995 · Cited by 386
Self-citationThe role of grain boundaries in perovskite solar cells
Lee, J.-W., Bae, S.-H., De Marco, N., Hsieh, Y.-T., Dai, Z., & Yang, Y. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2017.07.014 · Cited by 292
Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites
Chu, Z., Yang, M., Schulz, P., Wu, D., Ma, X., Seifert, E., Sun, L., Li, X., Zhu, K., & Lai, K. (2017) · Nature Communications · doi:10.1038/s41467-017-02331-4 · Cited by 288
Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells
Zhao, W., Yao, Z., Yu, F., Yang, D., & Liu, S. (. (2018) · Advanced Science · doi:10.1002/advs.201700131 · Cited by 284
Self-citationFeng, J., Yang, Z., Yang, D., Ren, X., Zhu, X., Jin, Z., Zi, W., Wei, Q., & Liu, S. (. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.010 · Cited by 260
Self-citationAre Mobilities in Hybrid Organic–Inorganic Halide Perovskites Actually “High”?
Brenner, T. M., Egger, D. A., Rappe, A. M., Kronik, L., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02390 · Cited by 237
Efficient Flexible Solar Cell based on Composition‐Tailored Hybrid Perovskite
Bi, C., Chen, B., Wei, H., DeLuca, S. J., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201605900 · Cited by 220
Coordination chemistry of halocarbons
Kulawiec, R. J., & Crabtree, R. H. (1990) · Coordination Chemistry Reviews · doi:10.1016/0010-8545(90)80061-w · Cited by 207
Defect trapping states and charge carrier recombination in organic–inorganic halide perovskites
Wen, X., Feng, Y., Huang, S., Huang, F., Cheng, Y.-B., Green, M., & Ho-Baillie, A. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc03109e · Cited by 205
Superior stability for perovskite solar cells with 20% efficiency using vacuum co-evaporation
Zhu, X., Yang, D., Yang, R., Yang, B., Yang, Z., Ren, X., Zhang, J., Niu, J., Feng, J., & Liu, S. (. (2017) · Nanoscale · doi:10.1039/c7nr04501h · Cited by 203
Self-citationWearable Large‐Scale Perovskite Solar‐Power Source via Nanocellular Scaffold
Hu, X., Huang, Z., Zhou, X., Li, P., Wang, Y., Huang, Z., Su, M., Ren, W., Li, F., Li, M., et al. (2017) · Advanced Materials · doi:10.1002/adma.201703236 · Cited by 188
Do grain boundaries dominate non-radiative recombination in CH3NH3PbI3perovskite thin films?
Yang, M., Zeng, Y., Li, Z., Kim, D. H., Jiang, C.-S., van de Lagemaat, J., & Zhu, K. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp08770a · Cited by 187
Wang, C., Guan, L., Zhao, D., Yu, Y., Grice, C. R., Song, Z., Awni, R. A., Chen, J., Wang, J., Zhao, X., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00644 · Cited by 184
Park, M., Kim, H. J., Jeong, I., Lee, J., Lee, H., Son, H. J., Kim, D., & Ko, M. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501406 · Cited by 170
Landi, G., Neitzert, H. C., Barone, C., Mauro, C., Lang, F., Albrecht, S., Rech, B., & Pagano, S. (2017) · Advanced Science · doi:10.1002/advs.201700183 · Cited by 157
Dagar, J., Castro‐Hermosa, S., Gasbarri, M., Palma, A. L., Cinà, L., Matteocci, F., Calabrò, E., Carlo, A. D., & Brown, T. M. (2017) · Nano Research · doi:10.1007/s12274-017-1896-5 · Cited by 150
High‐Efficiency Flexible Solar Cells Based on Organometal Halide Perovskites
Wang, Y., Bai, S., Cheng, L., Wang, N., Wang, J., Gao, F., & Huang, W. (2015) · Advanced Materials · doi:10.1002/adma.201504260 · Cited by 130
Preparation of flexible perovskite solar cells by a gas pump drying method on a plastic substrate
Gao, L., Liang, L., Song, X., Ding, B., Yang, G., Fan, B., Li, C.-X., & Li, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00230g · Cited by 95
Liang, Q., Liu, J., Cheng, Z., Li, Y., Chen, L., Zhang, R., Zhang, J., & Han, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08015k · Cited by 90
Bai, L., Wang, Z., Han, Y., Zuo, Z.-Y., Liu, B., Yu, M., Zhang, H., Lin, J., Xia, Y., Yin, C., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.005 · Cited by 56
Self-citationLi, K., Xiao, J., Yu, X., Li, T., Xiao, D., He, J., Zhou, P. C., Zhang, Y., Li, W., Ku, Z., et al. (2018) · Scientific Reports · doi:10.1038/s41598-017-18970-y · Cited by 48
Nguyen, B. P., Kim, G. Y., Jo, W., Kim, B. J., & Jung, H. S. (2017) · Nanotechnology · doi:10.1088/1361-6528/aa727e · Cited by 28
Cited by
Recent progress in flexible–wearable solar cells for self-powered electronic devices
Hashemi, S. A., Ramakrishna, S., & Aberle, A. G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03046h · Cited by 527
Enabling Flexible All-Perovskite Tandem Solar Cells
Palmstrom, A. F., Eperon, G. E., Leijtens, T., Prasanna, R., Habisreutinger, S. N., Nemeth, W., Gaulding, E. A., Dunfield, S. P., Reese, M., Nanayakkara, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.009 · Cited by 493
Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications
Yang, D., Yang, R., Priya, S., & Liu, S. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201809781 · Cited by 461
Self-citationReview on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
Flexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
Metadata
- Authors
- Feng, J., Zhu, X., Yang, Z., Zhang, X., Niu, J., Wang, Z., Zuo, S., Priya, S., Liu, S. (., & Yang, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-07-11
- Volume
- 30
- Issue
- 35
- Pages
- e1801418-e1801418
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2852164233
- Cited by
- 484
- References
- 52
- FWCI
- 24.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.