The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Interface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Abstract
In this work, a SnO 2/ZnO bilayered electron transporting layer (ETL) aimed to achieve low energy loss and large open‐circuit voltage (Voc) for high‐efficiency all‐inorganic CsPbI 2 Br perovskite solar cells (PVSCs) is introduced. The high‐quality CsPbI 2 Br film with regular crystal grains and full coverage can be realized on the SnO 2/ZnO surface. The higher‐lying conduction band minimum of ZnO facilitates desirable cascade energy level alignment between the perovskite and SnO 2/ZnO bilayered ETL with superior electron extraction capability, resulting in a suppressed interfacial trap‐assisted recombination with lower charge recombination rate and greater charge extraction efficiency. The as‐optimized all‐inorganic PVSC delivers a high Voc of 1.23 V and power conversion efficiency (PCE) of 14.6%, which is one of the best efficiencies reported for the Cs‐based all‐inorganic PVSCs to date. More importantly, decent thermal stability with only 20% PCE loss is demonstrated for the SnO 2/ZnO‐based CsPbI 2 Br PVSCs after being heated at 85 °C for 300 h. These findings provide important interface design insights that will be crucial to further improve the efficiency of all‐inorganic PVSCs in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Self-citationSolvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Space-Charge Limited Photocurrent
Mihailetchi, V. D., Wildeman, J., & Blom, P. W. M. (2005) · Physical Review Letters · doi:10.1103/physrevlett.94.126602 · Cited by 1,130
All-Inorganic Perovskite Solar Cells
Liang, J., Wang, C., Wang, Y., Xu, Z., Lu, Z., Ma, Y., Zhu, H., Hu, Y., Xiao, C., Yi, X., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10227 · Cited by 1,089
Kyaw, A. K. K., Wang, D. H., Gupta, V., Leong, W. L., Ke, L., Bazan, G. C., & Heeger, A. J. (2013) · ACS Nano · doi:10.1021/nn401267s · Cited by 1,046
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Thermochromic halide perovskite solar cells
Lin, J., Lai, M., Dou, L., Kley, C. S., Chen, H., Peng, F., Sun, J., Lu, D., Hawks, S. A., Xie, C., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0006-0 · Cited by 853
Trap‐Assisted Non‐Radiative Recombination in Organic–Inorganic Perovskite Solar Cells
Wetzelaer, G. A. H., Scheepers, M., Sempere, A. M., Momblona, C., Ávila, J., & Bolink, H. J. (2015) · Advanced Materials · doi:10.1002/adma.201405372 · Cited by 849
Strongly emissive perovskite nanocrystal inks for high-voltage solar cells
Akkerman, Q. A., Gandini, M., Di Stasio, F., Rastogi, P., Palazon, F., Bertoni, G., Ball, J. M., Prato, M., Petrozza, A., & Manna, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.194 · Cited by 721
Light-Induced Phase Segregation in Halide-Perovskite Absorbers
Slotcavage, D. J., Karunadasa, H. I., & McGehee, M. D. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00495 · Cited by 712
Koster, L. J. A., Mihailetchi, V. D., Xie, H., & Blom, P. W. M. (2005) · Applied Physics Letters · doi:10.1063/1.2130396 · Cited by 683
Li, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Self-citationTress, W., Marinova, N., Inganäs, O., Nazeeruddin, M. K., Zakeeruddin, S. M., & Graetzel, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400812 · Cited by 522
Bush, K. A., Frohna, K., Prasanna, R., Beal, R. E., Leijtens, T., Swifter, S. A., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01255 · Cited by 480
Zeng, Q., Zhang, X., Feng, X., Lu, S., Chen, Z., Yong, X., Redfern, S. A. T., Wei, H., Wang, H., Shen, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705393 · Cited by 464
Self-citationMa, Q., Huang, S., Wen, X., Green, M. A., & Ho‐Baillie, A. W. Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502202 · Cited by 433
Recombination Study of Combined Halides (Cl, Br, I) Perovskite Solar Cells
Suarez, B., Gonzalez-Pedro, V., Ripolles, T. S., Sanchez, R. S., Otero, L., & Mora-Sero, I. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006797 · Cited by 428
Chen, C., Lin, H., Chiang, K., Tsai, W., Huang, Y., Tsao, C., & Lin, H. (2017) · Advanced Materials · doi:10.1002/adma.201605290 · Cited by 395
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Zuo, C., & Ding, L. (2014) · Nanoscale · doi:10.1039/c4nr02425g · Cited by 385
Zhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703246 · Cited by 338
Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells
Choi, H., Mai, C.-K., Kim, H.-B., Jeong, J., Song, S., Bazan, G. C., Kim, J. Y., & Heeger, A. J. (2015) · Nature Communications · doi:10.1038/ncomms8348 · Cited by 323
Kim, J., Kim, G., Kim, T. K., Kwon, S., Back, H., Lee, J., Lee, S. H., Kang, H., & Lee, K. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03954h · Cited by 305
Inorganic Perovskite Solar Cells: A Rapidly Growing Field
Chen, H., Xiang, S., Li, W., Liu, H., Zhu, L., & Yang, S. (2018) · Solar RRL · doi:10.1002/solr.201700188 · Cited by 245
Xue, Q., Bai, Y., Liu, M., Xia, R., Hu, Z., Chen, Z., Jiang, X., Huang, F., Yang, S., Matsuo, Y., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602333 · Cited by 243
Self-citationBai, Y., Yu, H., Zhu, Z., Jiang, K., Zhang, T., Zhao, N., Yang, S., & Yan, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05309e · Cited by 225
Self-citationZhu, Z., Bai, Y., Lee, H. K. H., Mu, C., Zhang, T., Zhang, L., Wang, J., Yan, H., So, S. K., & Yang, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401557 · Cited by 190
Self-citationNam, J. K., Jung, M. S., Chai, S. U., Choi, Y. J., Kim, D., & Park, J. H. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b01067 · Cited by 186
Wang, Y., Zhang, T., Xu, F., Li, Y., & Zhao, Y. (2017) · Solar RRL · doi:10.1002/solr.201700180 · Cited by 165
Investigating charge dynamics in halide perovskite-sensitized mesostructured solar cells
Roiati, V., Colella, S., Lerario, G., Marco, L. D., Rizzo, A., Listorti, A., & Gigli, G. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43991g · Cited by 157
Improved Charge Collection in Highly Efficient CsPbBrI2 Solar Cells with Light-Induced Dealloying
Niezgoda, J. S., Foley, B. J., Chen, A. Z., & Choi, J. J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00258 · Cited by 111
Trap-Induced Losses in Hybrid Photovoltaics
Gao, F., Li, Z., Wang, J., Rao, A., Howard, I. A., Abrusci, A., Massip, S., McNeill, C. R., & Greenham, N. C. (2014) · ACS Nano · doi:10.1021/nn501185h · Cited by 95
Self-citationPyridine-based electron transporting materials for highly efficient organic solar cells
Lin, H., Lu, C.-W., Lin, L., Chen, Y.-H., Lin, W., Wong, K., & Lin, F. R. (2012) · Journal of Materials Chemistry A · doi:10.1039/c2ta00253a · Cited by 48
Cited by
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
He, F., You, X., Gong, H., Yang, Y., Bai, T., Wang, W., Guo, W., Liu, X., & Ye, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19721 · Cited by 421
Inorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Self-citation
Metadata
- Authors
- Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., & Cao, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-07-03
- Volume
- 30
- Issue
- 33
- Pages
- e1802509-e1802509
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2810811905
- Cited by
- 404
- References
- 45
- FWCI
- 24.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.