The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Abstract
Batteries constructed via 3D printing techniques have inherent advantages including opportunities for miniaturization, autonomous shaping, and controllable structural prototyping. However, 3D‐printed lithium metal batteries (LMBs) have not yet been reported due to the difficulties of printing lithium (Li) metal. Here, for the first time, high‐performance LMBs are fabricated through a 3D printing technique using cellulose nanofiber (CNF), which is one of the most earth‐abundant biopolymers. The unique shear thinning properties of CNF gel enables the printing of a LiFePO 4 electrode and stable scaffold for Li. The printability of the CNF gel is also investigated theoretically. Moreover, the porous structure of the CNF scaffold also helps to improve ion accessibility and decreases the local current density of Li anode. Thus, dendrite formation due to uneven Li plating/stripping is suppressed. A multiscale computational approach integrating first‐principle density function theory and a phase‐field model is performed and reveals that the porous structures have more uniform Li deposition. Consequently, a full cell built with a 3D‐printed Li anode and a LiFePO 4 cathode exhibits a high capacity of 80 mA h g−1 at a charge/discharge rate of 10 C with capacity retention of 85% even after 3000 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationTEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Self-citation3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Defect characterization in graphene and carbon nanotubes using Raman spectroscopy
Dresselhaus, M. S., Jorio, A., Souza Filho, A. G., & Saito, R. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0213 · Cited by 779
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Highly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
Self-citationProgress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Anomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Self-citationEmerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Nanocellulose as green dispersant for two-dimensional energy materials
Li, Y., Zhu, H., Shen, F., Wan, J., Lacey, S., Fang, Z., Dai, H., & Hu, L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.02.015 · Cited by 322
Self-citationZou, P., Wang, Y., Chiang, S.-W., Wang, X., Kang, F., & Yang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-02888-8 · Cited by 319
Self-citationDirect Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Kuang, Y., Chen, C., Pastel, G., Li, Y., Song, J., Mi, R., Kong, W., Liu, B., Jiang, Y., Yang, K., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802398 · Cited by 250
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Latest advances in the manufacturing of 3D rechargeable lithium microbatteries
Ferrari, S., Loveridge, M., Beattie, S. D., Jahn, M., Dashwood, R. J., & Bhagat, R. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.133 · Cited by 248
Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries
Cheng, M., Jiang, Y., Yao, W., Yuan, Y., Deivanayagam, R., Foroozan, T., Huang, Z., Song, B., Rojaee, R., Shokuhfar, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800615 · Cited by 214
Kim, S.-H., Choi, K.-H., Cho, S.-J., Choi, S., Park, S., & Lee, S.-Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01394 · Cited by 209
Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network
Li, Y., Zhu, H., Wang, Y., Ray, U., Zhu, S., Dai, J., Chen, C., Fu, K., Jang, S., Henderson, D., et al. (2017) · Small Methods · doi:10.1002/smtd.201700222 · Cited by 172
Self-citationSolidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600096 · Cited by 160
Li, Y., Leung, K., & Qi, Y. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00363 · Cited by 159
Muraliganth, T., Murugan, A. V., & Manthiram, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b812165f · Cited by 150
Stable Metal Anode enabled by Porous Lithium Foam with Superior Ion Accessibility
Hafez, A. M., Jiao, Y., Shi, J., Ma, Y., Cao, D., Liu, Y., & Zhu, H. (2018) · Advanced Materials · doi:10.1002/adma.201802156 · Cited by 141
Self-citationYang, L., Mukhopadhyay, A., Jiao, Y., Yong, Q., Chen, L., Xing, Y., Hamel, J., & Zhu, H. (2017) · Nanoscale · doi:10.1039/c7nr02243c · Cited by 121
Self-citationMatrix-Assisted Three-Dimensional Printing of Cellulose Nanofibers for Paper Microfluidics
Shin, S., & Hyun, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07609 · Cited by 72
Cited by
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Cellulose‐Based Flexible Functional Materials for Emerging Intelligent Electronics
Zhao, D., Zhu, Y., Cheng, W., Chen, W., Wu, Y., & Yu, H. (2021) · Advanced Materials · doi:10.1002/adma.202000619 · Cited by 842
Advanced Nanocellulose‐Based Composites for Flexible Functional Energy Storage Devices
Xu, T., Du, H., Liu, H., Liu, W., Zhang, X., Si, C., Liu, P., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202101368 · Cited by 696
Lithium metal anodes: Present and future
Wang, R., Cui, W., Chu, F., & Wu, F. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.12.024 · Cited by 544
Abolore, R. S., Jaiswal, S., & Jaiswal, A. K. (2024) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2023.100396 · Cited by 425
Metadata
- Authors
- Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., & Zhu, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-02-13
- Volume
- 31
- Issue
- 14
- Pages
- e1807313-e1807313
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2914174892
- Cited by
- 337
- References
- 42
- FWCI
- 15.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.