The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Efficient and Stable CsPbI3 Solar Cells via Regulating Lattice Distortion with Surface Organic Terminal Groups
Abstract
All‐inorganic cesium lead iodide perovskites (CsPbI 3) are promising wide‐bandgap materials for use in the perovskite/silicon tandem solar cells, but they easily undergo a phase transition from a cubic black phase to an orthorhombic yellow phase under ambient conditions. It is shown that this phase transition is triggered by moisture that causes distortion of the corner‐sharing octahedral framework ([PbI 6]4−). Here, a novel strategy to suppress the octahedral tilting of [PbI 6]4− units in cubic CsPbI 3 by systematically controlling the steric hindrance of surface organic terminal groups is provided. This steric hindrance effectively prevents the lattice distortion and thus increases the energy barrier for phase transition. This mechanism is verified by X‐ray diffraction measurements and density functional theory calculations. Meanwhile, the formation of an organic capping layer can also passivate the surface electronic trap states of perovskite absorber. These modifications contribute to a stable power conversion efficiency (PCE) of 13.2% for the inverted planar perovskite solar cells (PSCs), which is the highest efficiency achieved by the inverted‐structure inorganic PSCs. More importantly, the optimized devices retained 85% of their initial PCE after aging under ambient conditions for 30 days.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Lee, C., Yang, W., & Parr, R. G. (1988) · Physical Review B · doi:10.1103/physrevb.37.785 · Cited by 100,874
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Self-consistent molecular orbital methods. XX. A basis set for correlated wave functions
Krishnan, R., Binkley, J. S., Seeger, R., & Pople, J. A. (1980) · The Journal of Chemical Physics · doi:10.1063/1.438955 · Cited by 17,772
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04107 · Cited by 2,269
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Chen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Wu, Y., & Zhu, W. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35346f · Cited by 1,188
Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells
Beal, R. E., Slotcavage, D. J., Leijtens, T., Bowring, A. R., Belisle, R. A., Nguyen, W. H., Burkhard, G. F., Hoke, E. T., & McGehee, M. D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00002 · Cited by 1,136
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Surface Energies and Thermodynamic Phase Stability in Nanocrystalline Aluminas
McHale, J. M., Auroux, A., Perrotta, A. J., & Navrotsky, A. (1997) · Science · doi:10.1126/science.277.5327.788 · Cited by 946
Pan, A., He, B., Fan, X., Liu, Z., Urban, J. J., Alivisatos, A. P., He, L., & Liu, Y. (2016) · ACS Nano · doi:10.1021/acsnano.6b03863 · Cited by 900
Zhang, W., Pathak, S., Sakai, N., Stergiopoulos, T., Nayak, P. K., Noel, N. K., Haghighirad, A. A., Burlakov, V. M., deQuilettes, D. W., Sadhanala, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms10030 · Cited by 766
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Self-citationHigh-efficiency dye-sensitized solar cell with a novel co-adsorbent
Han, L., Islam, A., Chen, H., Malapaka, C., Chiranjeevi, B., Zhang, S., Yang, X., & Yanagida, M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03418b · Cited by 711
Self-citationBifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Self-citationLi, B., Zhang, Y., Fu, L., Yu, T., Zhou, S., Zhang, L., & Yin, L. (2018) · Nature Communications · doi:10.1038/s41467-018-03169-0 · Cited by 675
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Self-citationLin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Sutton, R. J., Filip, M. R., Haghighirad, A. A., Sakai, N., Wenger, B., Giustino, F., & Snaith, H. J. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00672 · Cited by 605
Wang, Q., Zheng, X., Deng, Y., Zhao, J., Chen, Z., & Huang, J. (2017) · Joule · doi:10.1016/j.joule.2017.07.017 · Cited by 544
Zeng, Q., Zhang, X., Feng, X., Lu, S., Chen, Z., Yong, X., Redfern, S. A. T., Wei, H., Wang, H., Shen, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705393 · Cited by 464
Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells
Bi, E., Chen, H., Xie, F., Wu, Y., Chen, W., Su, Y., Islam, A., Grätzel, M., Yang, X., & Han, L. (2017) · Nature Communications · doi:10.1038/ncomms15330 · Cited by 451
Self-citationThermodynamically Stable Orthorhombic γ-CsPbI3 Thin Films for High-Performance Photovoltaics
Zhao, B., Jin, S.-F., Huang, S., Liu, N., Ma, J.-Y., Xue, D.-J., Han, Q., Ding, J., Ge, Q.-Q., Feng, Y., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06050 · Cited by 380
Inorganic CsPbI3 Perovskite‐Based Solar Cells: A Choice for a Tandem Device
Ahmad, W., Khan, J., Niu, G., & Tang, J. (2017) · Solar RRL · doi:10.1002/solr.201700048 · Cited by 350
Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
Self-citationZhang, J., Bai, D., Jin, Z., Bian, H., Wang, K., Sun, J., Wang, Q., & Liu, S. (. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703246 · Cited by 338
Achieving long-term stable perovskite solar cells via ion neutralization
Back, H., Kim, G., Kim, J., Kong, J., Kim, T. K., Kang, H., Kim, H., Lee, J., Lee, S., & Lee, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00612d · Cited by 337
Wei, D., Ma, F., Wang, R., Dou, S., Cui, P., Huang, H., Ji, J., Jia, E., Jia, X., Sajid, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707583 · Cited by 330
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Sun, J., Huang, S., Liu, X., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b05949 · Cited by 296
High Chloride Doping Levels Stabilize the Perovskite Phase of Cesium Lead Iodide
Dastidar, S., Egger, D. A., Tan, L. Z., Cromer, S. B., Dillon, A. D., Liu, S., Kronik, L., Rappe, A. M., & Fafarman, A. T. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00635 · Cited by 290
Highly Air-Stable Carbon-Based α-CsPbI3 Perovskite Solar Cells with a Broadened Optical Spectrum
Xiang, S., Fu, Z., Li, W., Wei, Y., Liu, J., Liu, H., Zhu, L., Zhang, R., & Chen, H. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00820 · Cited by 280
Li, X., Chen, C., Cai, M., Hua, X., Xie, F., Liu, X., Hua, J., Long, Y., Tian, H., & Han, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800715 · Cited by 247
Self-citationYe, F., Chen, H., Xie, F., Tang, W., Yin, M., He, J., Bi, E., Wang, Y., Yang, X., & Han, L. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01411a · Cited by 206
Self-citation
Cited by
Wang, J., Zhang, J., Zhou, Y., Liu, H., Xue, Q., Li, X., Chueh, C.-C., Yip, H.-L., Zhu, Z., & Jen, A. K. Y. (2020) · Nature Communications · doi:10.1038/s41467-019-13909-5 · Cited by 662
The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?
Wang, Y., Liu, X., Zhang, T., Wang, X., Kan, M., Shi, J., & Zhao, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201910800 · Cited by 546
Self-citationAdvances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
The Main Progress of Perovskite Solar Cells in 2020–2021
Wu, T., Qin, Z., Wang, Y., Wu, Y., Chen, W., Zhang, S., Cai, M., Dai, S., Zhang, J., Liu, J., et al. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00672-w · Cited by 446
Self-citationThe surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Metadata
- Authors
- Wu, T., Wang, Y., Dai, Z., Cui, D., Wang, T., Meng, X., Bi, E., Yang, X., & Han, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-04-18
- Volume
- 31
- Issue
- 24
- Pages
- e1900605-e1900605
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2939361363
- Cited by
- 257
- References
- 41
- FWCI
- 15.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.