The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Low‐Bandgap Se‐Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High‐Performance Lithium–Sulfur Batteries
Abstract
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPSs) represent the main obstructions to the practical application of lithium–sulfur (Li–S) batteries. Herein, an anion‐deficient design of antimony selenide (Sb 2 Se 3−x) is developed to establish a multifunctional LiPS barrier toward the inhibition of polysulfide shuttling and enhancement of battery performance. The defect chemistry in the as‐developed Sb 2 Se 3−x promotes the intrinsic conductivity, strengthens the chemical affinity to LiPSs, and catalyzes the sulfur electrochemical conversion, which are verified by a series of computational and experimental results. Attributed to these unique superiorities, the obtained LiPS barrier efficiently promotes and stabilizes the sulfur electrochemistry, thus enabling excellent Li–S battery performance, e.g., outstanding cyclability over 500 cycles at 1.0 C with a minimum capacity fading rate of 0.027% per cycle, a superb rate capability up to 8.0 C, and a high areal capacity of 7.46 mAh cm−2 under raised sulfur loading. This work offers a defect engineering strategy toward fast and durable sulfur electrochemistry, holding great promise in developing practically viable Li–S batteries as well as enlightening the material design of related energy storage and conversion systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3−x
Kim, H.-S., Cook, J. B., Lin, H., Ko, J. S., Tolbert, S. H., Ozolins, V., & Dunn, B. (2017) · Nature Materials · doi:10.1038/nmat4810 · Cited by 2,166
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Chemical potential dependence of defect formation energies in GaAs: Application to Ga self-diffusion
Zhang, S., & Northrup, J. (1991) · Physical Review Letters · doi:10.1103/physrevlett.67.2339 · Cited by 1,791
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Yao, W., Tian, C., Yang, C., Xu, J., Meng, Y., Manke, I., Chen, N., Wu, Z., Zhan, L., Wang, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106370 · Cited by 358
Han, Z., Gao, R., Wang, T., Tao, S., Jia, Y., Lao, Z., Zhang, M., Zhou, J., Li, C., Piao, Z., et al. (2023) · Nature Catalysis · doi:10.1038/s41929-023-01041-z · Cited by 358
Yao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Self-citation
Metadata
- Authors
- Tian, Y., Li, G., Zhang, Y., Luo, D., Wang, X., Zhao, Y., Liu, H., Ji, P., Du, X., Li, J., & Chen, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-07
- Volume
- 32
- Issue
- 4
- Pages
- e1904876-e1904876
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2986058888
- Cited by
- 340
- References
- 44
- FWCI
- 17.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Low‐Bandgap Se‐Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High‐Performance Lithium–Sulfur Batteries. https://app.cochat.ai/papers/10.1002/adma.201904876
- The paper
- Tian, Y., Li, G., Zhang, Y., Luo, D., Wang, X., Zhao, Y., Liu, H., Ji, P., Du, X., Li, J., & Chen, Z. (2020). Low‐Bandgap Se‐Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High‐Performance Lithium–Sulfur Batteries. Advanced Materials. https://doi.org/10.1002/adma.201904876
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.