The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Low‐Bandgap Se‐Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High‐Performance Lithium–Sulfur Batteries
Abstract
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPSs) represent the main obstructions to the practical application of lithium–sulfur (Li–S) batteries. Herein, an anion‐deficient design of antimony selenide (Sb 2 Se 3−x) is developed to establish a multifunctional LiPS barrier toward the inhibition of polysulfide shuttling and enhancement of battery performance. The defect chemistry in the as‐developed Sb 2 Se 3−x promotes the intrinsic conductivity, strengthens the chemical affinity to LiPSs, and catalyzes the sulfur electrochemical conversion, which are verified by a series of computational and experimental results. Attributed to these unique superiorities, the obtained LiPS barrier efficiently promotes and stabilizes the sulfur electrochemistry, thus enabling excellent Li–S battery performance, e.g., outstanding cyclability over 500 cycles at 1.0 C with a minimum capacity fading rate of 0.027% per cycle, a superb rate capability up to 8.0 C, and a high areal capacity of 7.46 mAh cm−2 under raised sulfur loading. This work offers a defect engineering strategy toward fast and durable sulfur electrochemistry, holding great promise in developing practically viable Li–S batteries as well as enlightening the material design of related energy storage and conversion systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3−x
Kim, H.-S., Cook, J. B., Lin, H., Ko, J. S., Tolbert, S. H., Ozolins, V., & Dunn, B. (2017) · Nature Materials · doi:10.1038/nmat4810 · Cited by 2,166
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Chemical potential dependence of defect formation energies in GaAs: Application to Ga self-diffusion
Zhang, S., & Northrup, J. (1991) · Physical Review Letters · doi:10.1103/physrevlett.67.2339 · Cited by 1,791
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Self-citationMetal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Self-citationRevisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Self-citationWang, Z., Yang, C., Lin, T., Yin, H., Chen, P., Wan, D., Xu, F., Huang, F., Lin, J., Xie, X., et al. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41817k · Cited by 704
Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201802768 · Cited by 626
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
Zhang, J., Hu, H., Li, Z., & Lou, X. W. (. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511632 · Cited by 560
High‐Performance LiNi0.5Mn1.5O4 Spinel Controlled by Mn3+ Concentration and Site Disorder
Xiao, J., Chen, X., Sushko, P. V., Sushko, M. L., Kovarik, L., Feng, J., Deng, Z., Zheng, J., Graff, G. L., Nie, Z., et al. (2012) · Advanced Materials · doi:10.1002/adma.201104767 · Cited by 483
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries
Zhang, Y., Mu, Z., Yang, C., Xu, Z., Zhang, S., Zhang, X., Li, Y., Lai, J., Sun, Z., Yang, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707578 · Cited by 417
Self-citationEnhanced Charge Carrier Mobility in Two‐Dimensional High Dielectric Molybdenum Oxide
Balendhran, S., Deng, J., Ou, J. Z., Walia, S., Scott, J., Tang, J., Wang, K. L., Field, M. R., Russo, S., Zhuiykov, S., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203346 · Cited by 406
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Chen, W., Lei, T., Qian, T., Lv, W., He, W., Wu, C., Liu, X., Liu, J., Chen, B., Yan, C., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702889 · Cited by 362
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Wang, Y., Kong, D., Shi, W., Liu, B., Sim, G. J., Ge, Q., & Yang, H. Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601057 · Cited by 317
Sulfur Cathodes with Hydrogen Reduced Titanium Dioxide Inverse Opal Structure
Liang, Z., Zheng, G., Li, W., Seh, Z. W., Yao, H., Yan, K., Kong, D., & Cui, Y. (2014) · ACS Nano · doi:10.1021/nn501308m · Cited by 313
Li, G., Lei, W., Luo, D., Deng, Y., Deng, Z., Wang, D., Yu, A., & Chen, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01377b · Cited by 283
Self-citationZhang, L., Chen, X., Wan, F., Niu, Z., Wang, Y., Zhang, Q., & Chen, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b05466 · Cited by 259
Black Anatase Titania with Ultrafast Sodium-Storage Performances Stimulated by Oxygen Vacancies
Chen, J., Ding, Z., Wang, C., Hou, H., Zhang, Y., Wang, C.-W., Zou, G., & Ji, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01183 · Cited by 226
Self-citationLi, G., Luo, D., Wang, X., Seo, M. H., Hemmati, S., Yu, A., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702562 · Cited by 156
Self-citationPrikhodchenko, P. V., Gun, J., Sladkevich, S., Mikhaylov, A. A., Lev, O. E., Tay, Y. Y., Batabyal, S. K., & Yu, D. Y. W. (2012) · Chemistry of Materials · doi:10.1021/cm3031818 · Cited by 152
Yan, M., Chen, H., Yu, Y., Zhao, H., Li, C.-F., Hu, Z., Wu, P., Chen, L., Wang, H., Peng, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801066 · Cited by 140
Zuo, Y.-T., Wang, G., Peng, J., Li, G., Ma, Y., Yu, F., Dai, B., Guo, X., & Wong, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09742h · Cited by 139
Self-citationLi, M., Zhang, Y., Bai, Z., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804271 · Cited by 93
Self-citationEffect of Surface Hydroxyls on CO2Hydrogenation Over Cu/γ-Al2O3Catalyst: A Theoretical Study
Zhang, R., Wang, B., Liu, H., & Ling, L. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp206065y · Cited by 89
Self-citationOrilall, M. C., Abrams, N. M., Lee, J., DiSalvo, F. J., & Wiesner, U. B. (2008) · Journal of the American Chemical Society · doi:10.1021/ja802093u · Cited by 82
Wei, Y., Tao, Y., Kong, Z., Liu, L., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.07.005 · Cited by 82
Yin, F., Yang, J., Peng, H., & Yuan, W. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc00839f · Cited by 78
Sun, Y., Meng, J., Ju, H., Zhu, J., Li, Q., & Yang, Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06889e · Cited by 63
Vadapoo, R., Krishnan, S., Yilmaz, H., & Marin, C. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/17/175705 · Cited by 49
Golovchak, R., Shpotyuk, O. I., Kovalskiy, A. P., Miller, A. C., Čech, J., & Jain, H. (2008) · Physical Review B · doi:10.1103/physrevb.77.172201 · Cited by 27
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Yao, W., Tian, C., Yang, C., Xu, J., Meng, Y., Manke, I., Chen, N., Wu, Z., Zhan, L., Wang, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106370 · Cited by 358
Han, Z., Gao, R., Wang, T., Tao, S., Jia, Y., Lao, Z., Zhang, M., Zhou, J., Li, C., Piao, Z., et al. (2023) · Nature Catalysis · doi:10.1038/s41929-023-01041-z · Cited by 358
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Metadata
- Authors
- Tian, Y., Li, G., Zhang, Y., Luo, D., Wang, X., Zhao, Y., Liu, H., Ji, P., Du, X., Li, J., & Chen, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-07
- Volume
- 32
- Issue
- 4
- Pages
- e1904876-e1904876
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2986058888
- Cited by
- 340
- References
- 44
- FWCI
- 17.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.