The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Laser‐Induced Silicon Oxide for Anode‐Free Lithium Metal Batteries
Abstract
The development of a rechargeable Li metal anode (LMA) is an important milestone for improved battery technology. Practical issues hindering LMAs are the formation of Li dendrites and inactive Li during plating and stripping processes, which can cause short circuits, thermal runaway, and low coulombic efficiency (CE). Here, the use of a laser‐induced silicon oxide (LI‐SiOx) layer derived from a commercial adhesive tape to improve the reversibility of Li metal batteries (LMBs) is studied. The silicone‐based adhesive of the tape is converted by a commercial infrared laser into a homogeneous porous SiOx layer deposited directly over the current collector. The coating results in superior performance by suppressing the formation of Li dendrites and inactive Li and presenting higher average CE of 99.3% (2.0 mAh cm−2 at 2.0 mA cm−2) compared to bare electrodes. The thickness and morphology of the deposited Li is investigated, revealing a different mechanism of Li deposition on coated electrodes. The laser coating affords a method that is fast and avoids the use of toxic organic solvents and extensive drying times. The improved performance with the SiOx coating is demonstrated in LMB with a zero‐excess (“anode‐free”) configuration where a 100% improved performance is verified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Gram-scale bottom-up flash graphene synthesis
Luong, D. X., Bets, K. V., Algozeeb, W. A., Stanford, M. G., Kittrell, C., Chen, W., Salvatierra, R. V., Ren, M., McHugh, E. A., Advincula, P. A., et al. (2020) · Nature · doi:10.1038/s41586-020-1938-0 · Cited by 950
Self-citation
Cited by
Graphene Properties, Synthesis and Applications: A Review
Urade, A. R., Lahiri, I., & Suresh, K. S. (2023) · JOM · doi:10.1007/s11837-022-05505-8 · Cited by 490
Le, T. D., Phan, H., Kwon, S., Park, S., Jung, Y., Min, J., Chun, B. J., Yoon, H., Ko, S. H., Kim, S., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205158 · Cited by 433
Stable Aqueous Anode‐Free Zinc Batteries Enabled by Interfacial Engineering
An, Y., Tian, Y., Zhang, K., Liu, Y., Liu, C., Xiong, S., Feng, J., & Qian, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101886 · Cited by 299
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Heubner, C., Maletti, S., Auer, H., Hüttl, J., Voigt, K., Lohrberg, O., Nikolowski, K., Partsch, M., & Michaelis, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106608 · Cited by 277
Metadata
- Authors
- Chen, W., Salvatierra, R. V., Ren, M., Chen, J., Stanford, M. G., & Tour, J. M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-07-09
- Volume
- 32
- Issue
- 33
- Pages
- e2002850-e2002850
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3041934949
- Cited by
- 169
- References
- 3
- FWCI
- 7.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser‐Induced Silicon Oxide for Anode‐Free Lithium Metal Batteries. https://app.cochat.ai/papers/10.1002/adma.202002850
- The paper
- Chen, W., Salvatierra, R. V., Ren, M., Chen, J., Stanford, M. G., & Tour, J. M. (2020). Laser‐Induced Silicon Oxide for Anode‐Free Lithium Metal Batteries. Advanced Materials. https://doi.org/10.1002/adma.202002850
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.