The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Self‐Assembly of 0D–2D Heterostructure Electrocatalyst from MOF and MXene for Boosted Lithium Polysulfide Conversion Reaction
Abstract
The design of nanostructured electrocatalysts with high activity and long‐term durability for the sluggish lithium polysulfide (LiPS) conversion reaction is essential for the development of high‐performance lithium–sulfur (Li–S) batteries. Here, the self‐assembly of bimetallic selenides on nitrogen‐doped MXene (CoZn‐Se@N‐MX) based on the self‐assembly of metal–organic framework and MXene is reported. A combination of 0D CoZn‐Se nanoparticles and 2D N‐MX nanosheet co‐catalysts forms double lithiophilic‐sulfifilic binding sites that effectively immobilize and catalytically convert LiPS intermediates. This 0D–2D heterostructure catalyst has a hierarchical porous architecture with a large active area and enables rapid Li ion diffusion, reduces the activation energy of Li 2 S deposition, and lowers the energy barrier of Li 2 S dissolution. In addition, an assembled CoZn‐Se@N‐MX hybrid synergistically prevents the aggregation of the CoZn‐Se nanoparticles and restacking of the active areas of N‐MX nanosheets during assembly and the LiPS conversion process. The Li–S battery with this 0D–2D catalyst delivers excellent rate capability, ultralong cycling life (over 2000 cycles), and a high areal capacity of 6.6 mAh cm−2 with a low electrolyte/sulfur ratio of 5 µL mg−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Du, Z., Chen, X., Hu, W., Chuang, C., Xie, S., Hu, A., Yan, W., Kong, X., Wu, X., Ji, H., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b12973 · Cited by 1,490
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Bao, W., Liu, L., Wang, C., Choi, S., Wang, D., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702485 · Cited by 745
Zhao, C., Xu, G.-L., Yu, Z., Zhang, L., Hwang, I., Mo, Y.-X., Ren, Y., Cheng, L., Sun, C.-J., Ren, Y., et al. (2021) · Nature Nanotechnology · doi:10.1038/s41565-020-00797-w · Cited by 650
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
Cited by
Yao, W., Tian, C., Yang, C., Xu, J., Meng, Y., Manke, I., Chen, N., Wu, Z., Zhan, L., Wang, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106370 · Cited by 358
Self-citationRational Design of MOF-Based Materials for Next-Generation Rechargeable Batteries
Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00726-z · Cited by 323
Self-citationRechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Metadata
- Authors
- Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-07-09
- Volume
- 33
- Issue
- 33
- Pages
- e2101204-e2101204
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3178526374
- Cited by
- 330
- References
- 34
- FWCI
- 17.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Self‐Assembly of 0D–2D Heterostructure Electrocatalyst from MOF and MXene for Boosted Lithium Polysulfide Conversion Reaction. https://app.cochat.ai/papers/10.1002/adma.202101204
- The paper
- Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2021). Self‐Assembly of 0D–2D Heterostructure Electrocatalyst from MOF and MXene for Boosted Lithium Polysulfide Conversion Reaction. Advanced Materials. https://doi.org/10.1002/adma.202101204
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.