The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Towards High Performance Li–S Batteries via Sulfonate‐Rich COF‐Modified Separator
Abstract
Lithium–sulfur (Li–S) batteries are held great promise for next‐generation high‐energy‐density devices; however, polysulfide shuttle and Li‐dendrite growth severely hinders their commercial production. Herein, a sulfonate‐rich COF (SCOF‐2) is designed, synthesized, and used to modify the separator of Li–S batteries, providing a solution for the above challenges. It is found that the SCOF‐2 features stronger electronegativity and larger interlayer spacing than that of none/monosulfonate COFs, which can facilitate the Li+ migration and alleviate the formation of Li‐dendrites. Density functional theory (DFT) calculations and in situ Raman analysis demonstrate that the SCOF‐2 possesses a narrow bandgap and strong interaction on sulfur species, thereby suppressing self‐discharge behavior. As a result, the modified batteries deliver an ultralow attenuation rate of 0.047% per cycle over 800 cycles at 1 C, and excellent anti‐self‐discharge performance by a low‐capacity attenuation of 6.0% over one week. Additionally, even with the high‐sulfur‐loading cathode (3.2–8.2 mg s cm‐2) and lean electrolyte (5 µ L mg s‐1), the batteries still exhibit ≈80% capacity retention over 100 cycles, showing great potential for practical application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Self-citationMetal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Self-citationLithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 809
Lithium-Sulfur Batteries: Attaining the Critical Metrics
Bhargav, A., He, J., Gupta, A., & Manthiram, A. (2020) · Joule · doi:10.1016/j.joule.2020.01.001 · Cited by 719
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Self-citationHuang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Self-citationZhao, C., Xu, G.-L., Yu, Z., Zhang, L., Hwang, I., Mo, Y.-X., Ren, Y., Cheng, L., Sun, C.-J., Ren, Y., et al. (2021) · Nature Nanotechnology · doi:10.1038/s41565-020-00797-w · Cited by 650
Covalent–Organic Frameworks: Advanced Organic Electrode Materials for Rechargeable Batteries
Sun, T., Xie, J., Guo, W., Li, D., & Zhang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904199 · Cited by 622
Lithium Bond Chemistry in Lithium–Sulfur Batteries
Hou, T., Xu, W., Chen, X., Peng, H., Huang, J., & Zhang, Q. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704324 · Cited by 574
Self-citationLei, T., Chen, W., Lv, W., Huang, J., Zhu, J., Chu, J., Yan, C., Wu, C., Yan, Y., He, W., et al. (2018) · Joule · doi:10.1016/j.joule.2018.07.022 · Cited by 493
Self-citationSolvent-Free, Single Lithium-Ion Conducting Covalent Organic Frameworks
Jeong, K., Park, S., Jung, G. Y., Kim, S. H., Lee, Y.-H., Kwak, S. K., & Lee, S.-Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00543 · Cited by 440
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Yao, Y., Wang, H., Yang, H., Zeng, S., Xu, R. C., Liu, F., Shi, P., Feng, Y., Wang, K., Yang, W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905658 · Cited by 414
Peng, Y., Xu, G., Hu, Z., Cheng, Y., Chi, C., Yuan, D., Cheng, H., & Zhao, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06189 · Cited by 397
Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries
Wang, J., He, Y., & Yang, J. (2015) · Advanced Materials · doi:10.1002/adma.201402569 · Cited by 331
Single-atom catalysis enables long-life, high-energy lithium-sulfur batteries
Zhuang, Z., Kang, Q., Wang, D., & Li, Y. (2020) · Nano Research · doi:10.1007/s12274-020-2827-4 · Cited by 322
He, Y., Chang, Z., Wu, S., Qiao, Y., Bai, S., Jiang, K., He, P., & Zhou, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802130 · Cited by 295
Cui, C., Yang, C., Eidson, N., Chen, J., Han, F., Chen, L., Luo, C., Wang, P., Fan, X., & Wang, C. (2020) · Advanced Materials · doi:10.1002/adma.201906427 · Cited by 272
Self-citationZheng, Z.-J., Ye, H., & Guo, Z.-P. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03181j · Cited by 263
Yoo, J., Cho, S.-J., Jung, G. Y., Kim, S. H., Choi, K.-H., Kim, J.-H., Lee, C. K., Kwak, S. K., & Lee, S.-Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00870 · Cited by 255
Zhang, C., Qiao, Y., Xiong, P., Ma, W., Bai, P., Wang, X., Li, Q., Zhao, J., Xu, Y., Chen, Y., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b08046 · Cited by 209
Jiang, C., Tang, M., Zhu, S., Zhang, J., Wu, Y., Chen, Y., Xia, C., Wang, C., & Hu, W. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201809907 · Cited by 175
Chen, Y., Kang, Q., Jiang, P., & Huang, X. (2020) · Nano Research · doi:10.1007/s12274-020-3245-3 · Cited by 123
Recent advances in anode materials for potassium-ion batteries: A review
Ma, L., Lv, Y., Wu, J., Xia, C., Kang, Q., Zhang, Y., Liang, H., & Jin, Z. (2021) · Nano Research · doi:10.1007/s12274-021-3439-3 · Cited by 122
Self-citationWang, J., Zhang, J., Cheng, S., Yang, J., Xi, Y., Hou, X., Xiao, Q., & Lin, H. (2021) · Nano Letters · doi:10.1021/acs.nanolett.1c00534 · Cited by 115
Tian, C., Li, B., Hu, X., Wu, J., Li, P., Xiang, X., Zu, X., & Li, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19725 · Cited by 79
Cited by
Yao, W., Tian, C., Yang, C., Xu, J., Meng, Y., Manke, I., Chen, N., Wu, Z., Zhan, L., Wang, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202106370 · Cited by 358
Self-citationMetalated covalent organic frameworks: from synthetic strategies to diverse applications
Guan, Q., Zhou, L.-L., & Dong, Y.-B. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00983d · Cited by 326
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Self-citationYao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Self-citationRechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Metadata
- Authors
- Xu, J., An, S., Song, X., Cao, Y., Wang, N., Qiu, X., Zhang, Y., Chen, J., Duan, X., Huang, J., Li, W., & Wang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2021-10-07
- Volume
- 33
- Issue
- 49
- Pages
- e2105178-e2105178
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3203968514
- Cited by
- 414
- References
- 33
- FWCI
- 18.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.