The DOI matches its Crossref record; 290 of the 290 references it cites were found in a registry or an index.
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Abstract
Additive manufacturing (AM) has gained significant attention due to its ability to drive technological development as a sustainable, flexible, and customizable manufacturing scheme. Among the various AM techniques, direct ink writing (DIW) has emerged as the most versatile 3D printing technique for the broadest range of materials. DIW allows printing of practically any material, as long as the precursor ink can be engineered to demonstrate appropriate rheological behavior. This technique acts as a unique pathway to introduce design freedom, multifunctionality, and stability simultaneously into its printed structures. Here, a comprehensive review of DIW of complex 3D structures from various materials, including polymers, ceramics, glass, cement, graphene, metals, and their combinations through multimaterial printing is presented. The review begins with an overview of the fundamentals of ink rheology, followed by an in‐depth discussion of the various methods to tailor the ink for DIW of different classes of materials. Then, the diverse applications of DIW ranging from electronics to food to biomedical industries are discussed. Finally, the current challenges and limitations of this technique are highlighted, followed by its prospects as a guideline toward possible futuristic innovations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–290 of 290
Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports
Xu, C., Quinn, B., Lebel, L. L., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19986 · Cited by 147
Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review
Hou, Z., Lu, H., Li, Y., Yang, L., & Gao, Y. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.647229 · Cited by 143
Additive Manufacturing of Cellulosic Materials with Robust Mechanics and Antimicrobial Functionality
Pattinson, S. W., & Hart, A. J. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600084 · Cited by 142
Self-citation3D Printed Optical Quality Silica and Silica–Titania Glasses from Sol–Gel Feedstocks
Destino, J. F., Dudukovic, N. A., Johnson, M. A., Nguyen, D. T., Yee, T. D., Egan, G. C., Sawvel, A. M., Steele, W. A., Baumann, T. F., Duoss, E. B., et al. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700323 · Cited by 142
Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches
Cheng, X., & Zhang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901895 · Cited by 141
Extrusion-based 3D food printing – Materials and machines
Tan, C., Toh, W. Y., Wong, G., & Li, L. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.143 · Cited by 138
Salvekar, A. V., Huang, W., Xiao, R., Wong, Y. S., Venkatraman, S. S., Tay, K. H., & Shen, Z. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00539 · Cited by 135
Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
Dorishetty, P., Balu, R., Athukoralalage, S. S. A., Greaves, T. L., Mata, J. P., de Campo, L., Saha, N., Zannettino, A. C. W., Dutta, N. K., & Choudhury, N. R. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05317 · Cited by 134
Guo, B., Liang, G., Yu, S., Wang, Y., Zhi, C., & Bai, J. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.04.021 · Cited by 132
3D printed self-supporting elastomeric structures for multifunctional microfluidics
Su, R., Wen, J., Su, Q., Wiederoder, M. S., Koester, S. J., Uzarski, J. R., & McAlpine, M. C. (2020) · Science Advances · doi:10.1126/sciadv.abc9846 · Cited by 126
Jiang, P., Yan, C., Guo, Y., Zhang, X., Cai, M., Jia, X., Wang, X., & Zhou, F. (2019) · Biomaterials Science · doi:10.1039/c9bm00081j · Cited by 124
Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing
Wei, P., Leng, H., Chen, Q., Advíncula, R. C., & Pentzer, E. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00118 · Cited by 124
Properties of 3D-Printed Fiber-Reinforced Portland Cement Paste
Hambach, M., Rutzen, M., & Volkmer, D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00005-1 · Cited by 121
Direct-write fabrication of freestanding nanocomposite strain sensors
Farahani, R. D., Dalir, H., Borgne, V. L., Gautier, L., Khakani, M. A. E., Lévesque, M., & Therriault, D. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/8/085502 · Cited by 120
Direct ink writing of highly bioactive glasses
Nommeots‐Nomm, A., Lee, P. D., & Jones, J. R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.08.006 · Cited by 117
Textural modification of 3D printed dark chocolate by varying internal infill structure
Mantihal, S., Prakash, S., & Bhandari, B. (2018) · Food Research International · doi:10.1016/j.foodres.2018.12.034 · Cited by 117
Zhou, N., Liu, C., Lewis, J. A., & Ham, D. (2017) · Advanced Materials · doi:10.1002/adma.201605198 · Cited by 115
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
García‐Tuñón, E., Feilden, E., Zheng, H. Y., D’Elia, E., Leong, A., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07717 · Cited by 114
Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
Wang, Y., Miao, Y., Zhang, J., Wu, J., Kirk, T. B., Xu, J., Ma, D., & Xue, W. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.11.025 · Cited by 114
Guo, S., Heuzey, M.-C., & Therriault, D. (2014) · Langmuir · doi:10.1021/la4036425 · Cited by 111
Additive Manufacturing of Catalytically Active Living Materials
Saha, A., Johnston, T. G., Shafranek, R. T., Goodman, C. J., Zalatan, J. G., Storti, D., Ganter, M. A., & Nelson, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02719 · Cited by 111
Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites
Croom, B. P., Abbott, A. C., Kemp, J. W., Rueschhoff, L. M., Smieska, L., Woll, A. R., Stoupin, S., & Koerner, H. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101701 · Cited by 111
3D‐Printed Biomimetic Scaffold Simulating Microfibril Muscle Structure
Kim, W.-J., Kim, M., & Kim, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800405 · Cited by 109
Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramics
Yu, T., Zhang, Z., Liu, Q., Kuliiev, R., Orlovskaya, N. A., & Wu, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.10.245 · Cited by 109
Direct Ink Writing of Polymer Composite Electrolytes with Enhanced Thermal Conductivities
Cheng, M., Ramasubramanian, A., Rasul, M. G., Jiang, Y., Yuan, Y., Foroozan, T., Deivanayagam, R., Saray, M. T., Rojaee, R., Song, B., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006683 · Cited by 107
Chocolate-based Ink Three-dimensional Printing (Ci3DP)
Karyappa, R., & Hashimoto, M. (2019) · Scientific Reports · doi:10.1038/s41598-019-50583-5 · Cited by 106
Photocurable Liquid Core–Fugitive Shell Printing of Optical Waveguides
Lorang, D. J., Tanaka, D., Spadaccini, C. M., Rose, K. A., Cherepy, N. J., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201102411 · Cited by 100
Zhang, Y., Yin, X., Zheng, M., Moorlag, C., Yang, J., & Wang, Z. L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12428k · Cited by 100
Toward Macroscale, Isotropic Carbons with Graphene‐Sheet‐Like Electrical and Mechanical Properties
Worsley, M. A., Charnvanichborikarn, S., Montalvo, E., Shin, S. J., Tylski, E. D., Lewicki, J. P., Nelson, A. J., Satcher, J. H., Biener, J., Baumann, T. F., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400316 · Cited by 99
Direct Wiring of Eutectic Gallium–Indium to a Metal Electrode for Soft Sensor Systems
Kim, S., Oh, J., Jeong, D., & Bae, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05363 · Cited by 99
Wu, T., Jiang, P., Zhang, X., Guo, Y., Ji, Z., Jia, X., Wang, X., Zhou, X., & Liu, W. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107947 · Cited by 98
Chang, Q., Darabi, M. A., Liu, Y., He, Y., Zhong, W., Mequanint, K., Li, B., Lu, F., & Xing, M. M. Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06233e · Cited by 98
Reactive 3D Printing of Shape-Programmable Liquid Crystal Elastomer Actuators
Barnes, M., Sajadi, S. M., Parekh, S., Rahman, M. M., Ajayan, P. M., & Verduzco, R. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07331 · Cited by 97
Self-citation3D printing of high performance cyanate ester thermoset polymers
Chandrasekaran, S., Duoss, E. B., Worsley, M. A., & Lewicki, J. P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09466c · Cited by 90
Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors
Andrews, J. B., Mondal, K., Neumann, T. V., Cardenas, J. A., Wang, J. L., Parekh, D. P., Lin, Y., Ballentine, P., Dickey, M. D., & Franklin, A. D. (2018) · ACS Nano · doi:10.1021/acsnano.8b00909 · Cited by 90
3D Bioprinting of Cellulose Structures from an Ionic Liquid
Markstedt, K., Sundberg, J., & Gatenholm, P. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.0004 · Cited by 89
3D Printing of Salt as a Template for Magnesium with Structured Porosity
Kleger, N., Cihova, M., Masania, K., Studart, A. R., & Löffler, J. F. (2019) · Advanced Materials · doi:10.1002/adma.201903783 · Cited by 88
Multifunctional 3D printing of heterogeneous hydrogel structures
Nadernezhad, A., Khani, N., Skvortsov, G. A., Toprakhisar, B., Bakırcı, E., Menceloǵlu, Y. Z., Ünal, S., & Koç, B. (2016) · Scientific Reports · doi:10.1038/srep33178 · Cited by 87
Direct ink writing of porous titanium (Ti6Al4V) lattice structures
Elsayed, H., Rebesan, P., Giacomello, G., Pasetto, M., Gardin, C., Ferroni, L., Zavan, B., & Biasetto, L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109794 · Cited by 86
Wan, X., Wei, H., Zhang, F., Liu, Y., & Leng, J. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48177 · Cited by 86
Yun, X., Lu, B., Xiong, Z., Jia, B., Tang, B., Mao, H., Zhang, T., & Wang, X. (2019) · RSC Advances · doi:10.1039/c9ra04882k · Cited by 85
3D graphene supported MoO 2 for high performance binder-free lithium ion battery
Huang, Z. X., Wang, Y., Zhu, Y. G., Shi, Y., Wong, J. I., & Yang, H. Y. (2014) · Nanoscale · doi:10.1039/c4nr01744g · Cited by 83
3D printing of food materials: A state of art review and future applications
Piyush, P., Kumar, R., & Kumar, R. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.02.005 · Cited by 82
Zhou, W.-P., Bai, S. Y., Ma, Y., Ma, D., Hou, T., Shi, X., & Hu, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07696 · Cited by 81
del Pozo, M., Liu, L., da Cunha, M. P., Broer, D. J., & Schenning, A. P. H. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005560 · Cited by 81
Form and functional repair of long bone using 3D‐printed bioactive scaffolds
Tovar, N., Witek, L., Atria, P. J., Sobieraj, M. C., Bowers, M. M., Lopez, C. D., Cronstein, B. N., & Coelho, P. G. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2733 · Cited by 78
Zhou, L., Ye, J.-H., Fu, J., Gao, Q., & He, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22433 · Cited by 74
The development of 3D food printer for printing fibrous meat materials
Liu, C. Y., Ho, C., & Wang, J. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/284/1/012019 · Cited by 73
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Liu, J., Guo, Y., Weng, C., Zhang, H., & Zhang, Z. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105684 · Cited by 71
Additive manufacturing of polymer-based structures by extrusion technologies
Maguire, A., Pottackal, N. T., Saadi, M. A. S. R., Rahman, M. M., & Ajayan, P. M. (2020) · Oxford Open Materials Science · doi:10.1093/oxfmat/itaa004 · Cited by 67
Self-citationMoon, Y.-W., Choi, I. W., Koh, Y., & Kim, H. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.06.069 · Cited by 66
3D Printed Silicones with Shape Memory
Wu, A. S., Small, W., Bryson, T. M., Cheng, E., Metz, T. R., Schulze, S. E., Duoss, E. B., & Wilson, T. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-04663-z · Cited by 66
Active Mixing of Disparate Inks for Multimaterial 3D Printing
Ortega, J. M., Golobic, M., Sain, J. D., Lenhardt, J. M., Wu, A. S., Fisher, S., Pérez, L. X. P., Jaycox, A. W., Smay, J. E., Duoss, E. B., et al. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800717 · Cited by 65
Kim, D., Yoon, Y. J., Kauh, S. K., & Lee, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800380 · Cited by 62
3D printing of milk-based product
Lee, C.-P., Karyappa, R., & Hashimoto, M. (2020) · RSC Advances · doi:10.1039/d0ra05035k · Cited by 62
Diogo, G. S., Gaspar, V. M., Serra, I. R., Fradique, R., & Correia, I. J. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025001 · Cited by 60
Wang, C., Bhuiyan, M. E. H., Moreno, S., & Minary‐Jolandan, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01100 · Cited by 60
Taylor, J. M., Luan, H., Lewis, J. A., Rogers, J. A., Nuzzo, R. G., & Braun, P. V. (2022) · Advanced Materials · doi:10.1002/adma.202108391 · Cited by 60
Digital Printing of Solid‐State Lithium‐Ion Batteries
Deiner, L. J., Bezerra, C. A. G., Howell, T. G., & Powell, A. S. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900737 · Cited by 58
High‐Operating‐Temperature Direct Ink Writing of Mesoscale Eutectic Architectures
Boley, J. W., Chaudhary, K., Ober, T. J., Khorasaninejad, M., Chen, W. T., Hanson, E., Kulkarni, A. A., Oh, J., Kim, J., Aagesen, L. K., et al. (2016) · Advanced Materials · doi:10.1002/adma.201604778 · Cited by 56
Numerical investigation of channel blockage by flowing microparticles
Agbangla, G. C., Climent, É., & Bacchin, P. (2014) · Computers & Fluids · doi:10.1016/j.compfluid.2014.01.018 · Cited by 55
Lee, H., Kim, Y., Kim, S., & Kim, G. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00931b · Cited by 54
Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W–Cu Composites
Calvo, M., Jakus, A. E., Shah, R. N., Spolenak, R., & Dunand, D. C. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800354 · Cited by 54
Chen, Y., Han, P., Vandi, L., Dehghan‐Manshadi, A., Humphry, J., Kent, D., Stefani, I., Lee, P. D., Heitzmann, M. T., Cooper-White, J. J., et al. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.033 · Cited by 53
Three-dimensional hierarchical nanoporous copper via direct ink writing and dealloying
Mooraj, S., Welborn, S. S., Jiang, S., Peng, S., Fu, J., Baker, S. E., Duoss, E. B., Zhu, C. Y., Detsi, E., & Chen, W. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.10.013 · Cited by 53
Vergara, L. A., & Colorado, H. A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118669 · Cited by 52
Solvent-cast based metal 3D printing and secondary metallic infiltration
Xu, C., Bouchemit, A., L’Éspérance, G., Lebel, L. L., & Therriault, D. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02884a · Cited by 51
Islam, M., Thakur, M. S. H., Mojumder, S., & Hasan, M. N. (2020) · Computational Materials Science · doi:10.1016/j.commatsci.2020.110187 · Cited by 48
Self-citationDirect Ink Writing of Cement Structures Modified with Nanoscale Additive
Sajadi, S. M., Boul, P. J., Thaemlitz, C. J., Ashokkumar, M., Puthirath, A. B., Tiwary, C. S., Rahman, M. M., & Ajayan, P. M. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801380 · Cited by 45
Self-citationOmnidirectional Printing of Soft Elastomer for Liquid-State Stretchable Electronics
Wang, J., Yang, S., Ding, P., Cao, X., Zhang, Y., Cao, S., Zhang, K., Kong, S., Zhou, Y., Wang, X., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04730 · Cited by 45
3D Printable Conducting and Biocompatible PEDOT‐graft‐PLA Copolymers by Direct Ink Writing
Dominguez‐Alfaro, A., Gabirondo, E., Alegret, N., De León‐Almazán, C. M., Hernandez, R., Vallejo‐Illarramendi, A., Prato, M., & Mecerreyes, D. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100100 · Cited by 44
3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices
Song, B., Kenel, C., & Dunand, D. C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101412 · Cited by 43
Complex SiOC ceramics from 2D structures by 3D printing and origami
Huang, K., Elsayed, H., Franchin, G., & Colombo, P. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101144 · Cited by 41
Ko, H., Ratri, M. C., Kim, K., Jung, Y., Tae, G., & Shin, K. (2020) · Scientific Reports · doi:10.1038/s41598-020-64457-8 · Cited by 41
UV‐assisted three‐dimensional printing of polymer nanocomposites based on inorganic fillers
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Polymer Composites · doi:10.1002/pc.23735 · Cited by 37
3D Printed Food From Fruits and Vegetables
Ricci, I., Derossi, A., & Severini, C. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814564-7.00005-5 · Cited by 35
Direct ink writing of surface-modified flax elastomer composites
Jiang, Y., Plog, J., Yarin, A. L., & Pan, Y. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108061 · Cited by 35
McCracken, J. M., Rauzan, B. M., Kjellman, J. C. E., Kandel, M. E., Liu, Y. H., Badea, A., Miller, L. A., Rogers, S. A., Popescu, G., & Nuzzo, R. G. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800788 · Cited by 32
Periodic buckling of soft 3D printed bioinspired tubes
Liu, J., Liu, W., Pantula, A., Wang, Z., Gracias, D. H., & Nguyen, T. D. (2019) · Extreme Mechanics Letters · doi:10.1016/j.eml.2019.100514 · Cited by 26
Domènech, B., Tan, A. T. L., Jelitto, H., Berodt, E. Z., Blankenburg, M., Focke, O., Cann, J. L., Taşan, C. C., Ciacchi, L. C., Müller, M., et al. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000352 · Cited by 25
Self-citationShen, J., Yang, X., Wu, R., Shen, M., Lu, F., Zhang, F., Chen, Z., Chen, X., Xu, S., Gao, C., et al. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.09.049 · Cited by 24
A concise review on 4D printing technology
Saritha, D., & Boyina, D. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.016 · Cited by 24
3D-printed tungsten sheet-gyroids via reduction and sintering of extruded WO3-nanopowder inks
Kenel, C., Sesseg, J. P. W., Geisendorfer, N. R., Shah, R. N., Spolenak, R., & Dunand, D. C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101613 · Cited by 23
Stiff reconfigurable polygons for smart connecters and deployable structures
Zhao, Z., Wang, K., Zhang, L., Wang, L., Song, W., & Fang, D. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.105052 · Cited by 21
Chen, P., Kenel, C., Wang, Y., & Dunand, D. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100794 · Cited by 17
Design and development of pharmaceutical microprocesses in the production of nanomedicine
Noguez-Méndez, N. A., Quirino-Barreda, C. T., Faustino-Vega, A., Miranda-Calderón, J. E., Gazga-Urioste, C., Palomec, X. C., Martínez, A. R., & Pliego-Díaz, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-47720-8.00023-7 · Cited by 16
Direct ink writing of polymers and their composites, and related applications
Zhang, X., Jia, X., & Wang, X. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819535-2.00013-2 · Cited by 15
Wang, R., Yang, W., Gao, S., Ju, X., Zhu, P., Li, B., & Li, Q. (2019) · Journal of Materials Chemistry C · doi:10.1039/c8tc05759a · Cited by 13
Ke, X., Qiu, J., Wang, X., Yang, X., Shen, J., Ye, S., Yang, G., Xu, S., Bi, Q., Gou, Z., et al. (2020) · The FASEB Journal · doi:10.1096/fj.201903044r · Cited by 10
Direct‐Write Assembly of 3D Polymeric Structures
Parker, S. T., & Lewis, J. A. (2011) · Wiley eBooks · doi:10.1002/9783527633449.ch6 · Cited by 1
Research works printed but not linked: 81
- 10.1080/10667857.1997.11752736 · doi:10.1080/10667857.1997.11752736
- 10.1016/j.eml.2016.04.003 · doi:10.1016/j.eml.2016.04.003
- 10.1016/j.mtcomm.2021.102037 · doi:10.1016/j.mtcomm.2021.102037
- 10.1021/acs.chemmater.9b02961 · doi:10.1021/acs.chemmater.9b02961
- 10.1007/s00170-008-1700-5 · doi:10.1007/s00170-008-1700-5
- 10.1002/mame.201800511 · doi:10.1002/mame.201800511
- 10.1002/adem.201801314 · doi:10.1002/adem.201801314
- 10.1021/acsami.0c18255 · doi:10.1021/acsami.0c18255
- 10.1126/sciadv.abj8780 · doi:10.1126/sciadv.abj8780
- 10.1016/j.polymer.2011.01.059 · doi:10.1016/j.polymer.2011.01.059
- 10.1021/acsami.8b14584 · doi:10.1021/acsami.8b14584
- 10.1002/adma.201904668 · DOI
- 10.1177/0021998319865019 · doi:10.1177/0021998319865019
- 10.1088/1748-3190/aa6028 · doi:10.1088/1748-3190/aa6028
- 10.1007/s11837-017-2707-x · doi:10.1007/s11837-017-2707-x
- 10.1021/acs.langmuir.9b00766 · doi:10.1021/acs.langmuir.9b00766
- 10.1088/0954-0083/9/4/008 · doi:10.1088/0954-0083/9/4/008
- 10.1016/S1359-835X(98)00110-9 · doi:10.1016/s1359-835x(98)00110-9
- 10.1007/s11340-019-00498-z · doi:10.1007/s11340-019-00498-z
- 10.1016/j.addma.2020.101109 · doi:10.1016/j.addma.2020.101109
- A.Khater S.Bhattacharyya M. A. S. R.Saadi M.Barnes M.Lou V.Harikrishnan S. M.Sajadi P. J.Boul C. S.Tiwary H.Zhu M. M.Rahman P. M.Ajayan arXiv:2103.02672 [cond‐mat physics:physics]2021. · arXiv
- 10.1016/j.foodhyd.2008.01.001 · doi:10.1016/j.foodhyd.2008.01.001
- D.Periard N.Schaal M.Schaal E.Malone H.Lipson in2007 International Solid Freeform Fabrication Symposium 2007.
- 10.1038/s41538-021-00107-1 · DOI
- 10.1016/B978-0-12-385469-8.00047-2 · doi:10.1016/b978-0-12-385469-8.00047-2
- 10.1002/adem.201900604 · doi:10.1002/adem.201900604
- 10.1016/j.matdes.2015.02.018 · doi:10.1016/j.matdes.2015.02.018
- 10.1002/adem.201901541 · doi:10.1002/adem.201901541
- 10.1021/acssuschemeng.7b02450 · doi:10.1021/acssuschemeng.7b02450
- 10.1177/0022034517734846 · doi:10.1177/0022034517734846
- 10.1111/j.1551-2916.2012.05276.x · doi:10.1111/j.1551-2916.2012.05276.x
- 10.1111/ijac.12633 · doi:10.1111/ijac.12633
- 10.1016/j.addma.2019.05.018 · doi:10.1016/j.addma.2019.05.018
- 10.1111/jace.17911 · doi:10.1111/jace.17911
- 10.1002/jbm.a.31329 · doi:10.1002/jbm.a.31329
- 10.1111/jace.14213 · doi:10.1111/jace.14213
- 10.1002/adem.201800900 · doi:10.1002/adem.201800900
- 10.1016/j.jeurceramsoc.2017.05.021 · doi:10.1016/j.jeurceramsoc.2017.05.021
- 10.1038/s41467-019-09398-1 · doi:10.1038/s41467-019-09398-1
- 10.1016/j.matdes.2008.04.056 · doi:10.1016/j.matdes.2008.04.056
- 10.1016/j.compstruct.2016.01.020 · doi:10.1016/j.compstruct.2016.01.020
- 10.1016/j.jnucmat.2016.09.007 · doi:10.1016/j.jnucmat.2016.09.007
- 10.1080/17436753.2017.1379586 · doi:10.1080/17436753.2017.1379586
- Thomas D. J., 2017, Am. Ceram. Soc. Bull., 96, 28
- 10.1111/jace.14145 · doi:10.1111/jace.14145
- Singh M., 2015, Ceramic Engineering and Science Proceedings, 145
- 10.1111/jace.15045 · doi:10.1111/jace.15045
- 10.3390/ma11040515 · doi:10.3390/ma11040515
- 10.1016/j.jeurceramsoc.2016.01.047 · doi:10.1016/j.jeurceramsoc.2016.01.047
- 10.3390/ma13071636 · doi:10.3390/ma13071636
- 10.1016/j.jeurceramsoc.2012.05.005 · doi:10.1016/j.jeurceramsoc.2012.05.005
- Moini M., 2019, RILEM Bookseries, 176
- 10.1002/adma.201705651 · DOI · Paper page
- 10.1002/ppsc.201600401 · doi:10.1002/ppsc.201600401
- 10.1122/1.3573828 · doi:10.1122/1.3573828
- 10.1016/j.carbon.2021.05.003 · doi:10.1016/j.carbon.2021.05.003
- Kenel C., 2020, Addit. Manuf., 37
- 10.1016/j.matdes.2018.09.024 · doi:10.1016/j.matdes.2018.09.024
- 10.1002/admi.201800571 · doi:10.1002/admi.201800571
- 10.1002/admt.201700351 · doi:10.1002/admt.201700351
- 10.1002/admt.201600047 · doi:10.1002/admt.201600047
- 10.1002/adem.201900397 · doi:10.1002/adem.201900397
- 10.1002/admt.201800379 · doi:10.1002/admt.201800379
- 10.1016/j.scriptamat.2019.02.016 · doi:10.1016/j.scriptamat.2019.02.016
- 10.1016/j.ceramint.2019.06.175 · doi:10.1016/j.ceramint.2019.06.175
- 10.1002/aenm.201800408 · doi:10.1002/aenm.201800408
- 10.1021/acsami.7b06804 · doi:10.1021/acsami.7b06804
- 10.1002/aelm.201700483 · doi:10.1002/aelm.201700483
- 10.1016/j.actamat.2009.01.019 · doi:10.1016/j.actamat.2009.01.019
- 10.3390/ma7054001 · doi:10.3390/ma7054001
- Y.Jiang Direct Ink Writing of Functional Fiber Composites Ph.D. Thesis University of Illinois at Chicago 2020.
- 10.1111/jace.17084 · doi:10.1111/jace.17084
- 10.1016/j.sna.2017.06.016 · doi:10.1016/j.sna.2017.06.016
- 10.1002/adma.201470235 · doi:10.1002/adma.201470235
- 10.1002/admt.201800299 · doi:10.1002/admt.201800299
- D.Cohen J.Lipton M.Cutler D.Coulter A.Vesco H.Lipson in2009 International Solid Freeform Fabrication Symposium University Of Texas At Austin2009.
- J.Lipton D.Arnold F.Nigl N.Lopez D.Cohen N.Noren H.Lipson in2010 International Solid Freeform Fabrication Symposium University Of Texas At Austin2010.
- 10.1088/1361-6463/abe503 · doi:10.1088/1361-6463/abe503
- 10.1016/j.cirpj.2017.07.001 · doi:10.1016/j.cirpj.2017.07.001
- 10.1016/j.matpr.2021.02.396 · doi:10.1016/j.matpr.2021.02.396
- 10.1007/s10404-010-0700-6 · doi:10.1007/s10404-010-0700-6
Cited by
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Rashid Khan, H., & Latif Ahmad, A. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.07.014 · Cited by 310
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Metadata
- Authors
- Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-04-28
- Volume
- 34
- Issue
- 28
- Pages
- e2108855-e2108855
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4221095855
- Cited by
- 1,335
- References
- 290
- FWCI
- 71.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.