The DOI matches its Crossref record; 290 of the 290 references it cites were found in a registry or an index.
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Abstract
Additive manufacturing (AM) has gained significant attention due to its ability to drive technological development as a sustainable, flexible, and customizable manufacturing scheme. Among the various AM techniques, direct ink writing (DIW) has emerged as the most versatile 3D printing technique for the broadest range of materials. DIW allows printing of practically any material, as long as the precursor ink can be engineered to demonstrate appropriate rheological behavior. This technique acts as a unique pathway to introduce design freedom, multifunctionality, and stability simultaneously into its printed structures. Here, a comprehensive review of DIW of complex 3D structures from various materials, including polymers, ceramics, glass, cement, graphene, metals, and their combinations through multimaterial printing is presented. The review begins with an overview of the fundamentals of ink rheology, followed by an in‐depth discussion of the various methods to tailor the ink for DIW of different classes of materials. Then, the diverse applications of DIW ranging from electronics to food to biomedical industries are discussed. Finally, the current challenges and limitations of this technique are highlighted, followed by its prospects as a guideline toward possible futuristic innovations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Gogotsi, Y., & Anasori, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b06394 · Cited by 2,541
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Advanced structural ceramics in aerospace propulsion
Padture, N. P. (2016) · Nature Materials · doi:10.1038/nmat4687 · Cited by 2,148
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
Colombo, P., Mera, G., Riedel, R., & Sorarù, G. D. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03876.x · Cited by 1,887
Research works printed but not linked: 81
- 10.1080/10667857.1997.11752736 · doi:10.1080/10667857.1997.11752736
- 10.1016/j.eml.2016.04.003 · doi:10.1016/j.eml.2016.04.003
- 10.1016/j.mtcomm.2021.102037 · DOI
- 10.1021/acs.chemmater.9b02961 · doi:10.1021/acs.chemmater.9b02961
- 10.1007/s00170-008-1700-5 · doi:10.1007/s00170-008-1700-5
- 10.1002/mame.201800511 · DOI
- 10.1002/adem.201801314 · doi:10.1002/adem.201801314
- 10.1021/acsami.0c18255 · doi:10.1021/acsami.0c18255
- 10.1126/sciadv.abj8780 · doi:10.1126/sciadv.abj8780
- 10.1016/j.polymer.2011.01.059 · doi:10.1016/j.polymer.2011.01.059
- 10.1021/acsami.8b14584 · doi:10.1021/acsami.8b14584
- 10.1002/adma.201904668 · DOI
- 10.1177/0021998319865019 · doi:10.1177/0021998319865019
- 10.1088/1748-3190/aa6028 · doi:10.1088/1748-3190/aa6028
- 10.1007/s11837-017-2707-x · doi:10.1007/s11837-017-2707-x
- 10.1021/acs.langmuir.9b00766 · DOI
- 10.1088/0954-0083/9/4/008 · doi:10.1088/0954-0083/9/4/008
- 10.1016/S1359-835X(98)00110-9 · doi:10.1016/s1359-835x(98)00110-9
- 10.1007/s11340-019-00498-z · doi:10.1007/s11340-019-00498-z
- 10.1016/j.addma.2020.101109 · doi:10.1016/j.addma.2020.101109
- A.Khater S.Bhattacharyya M. A. S. R.Saadi M.Barnes M.Lou V.Harikrishnan S. M.Sajadi P. J.Boul C. S.Tiwary H.Zhu M. M.Rahman P. M.Ajayan arXiv:2103.02672 [cond‐mat physics:physics]2021. · arXiv
- 10.1016/j.foodhyd.2008.01.001 · doi:10.1016/j.foodhyd.2008.01.001
- D.Periard N.Schaal M.Schaal E.Malone H.Lipson in2007 International Solid Freeform Fabrication Symposium 2007.
- 10.1038/s41538-021-00107-1 · DOI
- 10.1016/B978-0-12-385469-8.00047-2 · doi:10.1016/b978-0-12-385469-8.00047-2
- 10.1002/adem.201900604 · doi:10.1002/adem.201900604
- 10.1016/j.matdes.2015.02.018 · doi:10.1016/j.matdes.2015.02.018
- 10.1002/adem.201901541 · doi:10.1002/adem.201901541
- 10.1021/acssuschemeng.7b02450 · doi:10.1021/acssuschemeng.7b02450
- 10.1177/0022034517734846 · doi:10.1177/0022034517734846
- 10.1111/j.1551-2916.2012.05276.x · DOI
- 10.1111/ijac.12633 · doi:10.1111/ijac.12633
- 10.1016/j.addma.2019.05.018 · doi:10.1016/j.addma.2019.05.018
- 10.1111/jace.17911 · doi:10.1111/jace.17911
- 10.1002/jbm.a.31329 · doi:10.1002/jbm.a.31329
- 10.1111/jace.14213 · DOI
- 10.1002/adem.201800900 · doi:10.1002/adem.201800900
- 10.1016/j.jeurceramsoc.2017.05.021 · doi:10.1016/j.jeurceramsoc.2017.05.021
- 10.1038/s41467-019-09398-1 · doi:10.1038/s41467-019-09398-1
- 10.1016/j.matdes.2008.04.056 · doi:10.1016/j.matdes.2008.04.056
- 10.1016/j.compstruct.2016.01.020 · doi:10.1016/j.compstruct.2016.01.020
- 10.1016/j.jnucmat.2016.09.007 · doi:10.1016/j.jnucmat.2016.09.007
- 10.1080/17436753.2017.1379586 · DOI
- Thomas D. J., 2017, Am. Ceram. Soc. Bull., 96, 28
- 10.1111/jace.14145 · doi:10.1111/jace.14145
- Singh M., 2015, Ceramic Engineering and Science Proceedings, 145
- 10.1111/jace.15045 · doi:10.1111/jace.15045
- 10.3390/ma11040515 · doi:10.3390/ma11040515
- 10.1016/j.jeurceramsoc.2016.01.047 · doi:10.1016/j.jeurceramsoc.2016.01.047
- 10.3390/ma13071636 · doi:10.3390/ma13071636
- 10.1016/j.jeurceramsoc.2012.05.005 · DOI
- Moini M., 2019, RILEM Bookseries, 176
- 10.1002/adma.201705651 · DOI · Paper page
- 10.1002/ppsc.201600401 · doi:10.1002/ppsc.201600401
- 10.1122/1.3573828 · DOI
- 10.1016/j.carbon.2021.05.003 · DOI
- Kenel C., 2020, Addit. Manuf., 37
- 10.1016/j.matdes.2018.09.024 · doi:10.1016/j.matdes.2018.09.024
- 10.1002/admi.201800571 · doi:10.1002/admi.201800571
- 10.1002/admt.201700351 · doi:10.1002/admt.201700351
- 10.1002/admt.201600047 · doi:10.1002/admt.201600047
- 10.1002/adem.201900397 · doi:10.1002/adem.201900397
- 10.1002/admt.201800379 · DOI
- 10.1016/j.scriptamat.2019.02.016 · DOI
- 10.1016/j.ceramint.2019.06.175 · doi:10.1016/j.ceramint.2019.06.175
- 10.1002/aenm.201800408 · DOI
- 10.1021/acsami.7b06804 · DOI
- 10.1002/aelm.201700483 · doi:10.1002/aelm.201700483
- 10.1016/j.actamat.2009.01.019 · doi:10.1016/j.actamat.2009.01.019
- 10.3390/ma7054001 · doi:10.3390/ma7054001
- Y.Jiang Direct Ink Writing of Functional Fiber Composites Ph.D. Thesis University of Illinois at Chicago 2020.
- 10.1111/jace.17084 · DOI
- 10.1016/j.sna.2017.06.016 · doi:10.1016/j.sna.2017.06.016
- 10.1002/adma.201470235 · doi:10.1002/adma.201470235
- 10.1002/admt.201800299 · DOI
- D.Cohen J.Lipton M.Cutler D.Coulter A.Vesco H.Lipson in2009 International Solid Freeform Fabrication Symposium University Of Texas At Austin2009.
- J.Lipton D.Arnold F.Nigl N.Lopez D.Cohen N.Noren H.Lipson in2010 International Solid Freeform Fabrication Symposium University Of Texas At Austin2010.
- 10.1088/1361-6463/abe503 · DOI
- 10.1016/j.cirpj.2017.07.001 · doi:10.1016/j.cirpj.2017.07.001
- 10.1016/j.matpr.2021.02.396 · doi:10.1016/j.matpr.2021.02.396
- 10.1007/s10404-010-0700-6 · doi:10.1007/s10404-010-0700-6
Cited by
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Rashid Khan, H., & Latif Ahmad, A. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.07.014 · Cited by 310
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
3D-printed PEDOT:PSS for soft robotics
Li, J., Cao, J., Lu, B., & Gu, G. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00587-5 · Cited by 274
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Abedini, A., Sohrabvandi, S., Sadighara, P., Hosseini, H., Farhoodi, M., Assadpour, E., Alizadeh Sani, M., Zhang, F., Seyyedi-Mansour, S., & Jafari, S. M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103181 · Cited by 71
Cheng, Y., Wang, Z., Lavorgna, M., He, L., & Xia, H. (2025) · Small · doi:10.1002/smll.202408869 · Cited by 20
Metadata
- Authors
- Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-04-28
- Volume
- 34
- Issue
- 28
- Pages
- e2108855-e2108855
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4221095855
- Cited by
- 1,335
- References
- 290
- FWCI
- 71.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.