The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Pre‐Buried Additive for Cross‐Layer Modification in Flexible Perovskite Solar Cells with Efficiency Exceeding 22%
Abstract
Halide perovskites have shown superior potentials in flexible photovoltaics due to their soft and high power‐to‐weight nature. However, interfacial residual stress and lattice mismatch due to the large deformation of flexible substrates have greatly limited the performance of flexible perovskite solar cells (F‐PSCs). Here, ammonium formate (HCOONH 4) is used as a pre‐buried additive in electron transport layer (ETL) to realize a bottom‐up infiltration process for an in situ, integral modification of ETL, perovskite layer, and their interface. The HCOONH 4 treatment leads to an enhanced electron extraction in ETL, relaxed residual strain and micro‐strain in perovskite film, along with reduced defect densities within these layers. As a result, a top power conversion efficiency of 22.37% and a certified 21.9% on F‐PSCs are achieved, representing the highest performance reported so far. This work links the critical connection between multilayer mechanics/defect profiles of ETL‐perovskite structure and device performance, thus providing meaningful scientific direction to further narrowing the efficiency gap between F‐PSCs and rigid‐substrate counterparts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Min, H., Lee, D. Y., Kim, J., Kim, G., Lee, K. S., Kim, J., Paik, M. J., Kim, Y. K., Kim, K. S., Kim, M. G., et al. (2021) · Nature · doi:10.1038/s41586-021-03964-8 · Cited by 3,174
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Jeong, J., Kim, M., Seo, J., Lu, H., Ahlawat, P., Mishra, A., Yang, Y., Hope, M. A., Eickemeyer, F. T., Kim, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03406-5 · Cited by 3,072
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Physics of semiconductor devices /2nd edition/
Sze, S. M. (1981) · New York eBooks · Cited by 1,599
Yang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells
Kim, G., Min, H., Lee, K. S., Lee, D. Y., Yoon, S. M., & Seok, S. I. (2020) · Science · doi:10.1126/science.abc4417 · Cited by 1,346
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Strain engineering in perovskite solar cells and its impacts on carrier dynamics
Zhu, C., Niu, X., Fu, Y., Li, N., Hu, C., Chen, Y., He, X., Na, G., Liu, P., Zai, H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08507-4 · Cited by 1,042
Zhao, J., Deng, Y., Wei, H., Zheng, X., Yu, Z., Shao, Y., Shield, J. E., & Huang, J. (2017) · Science Advances · doi:10.1126/sciadv.aao5616 · Cited by 974
Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity
Hui, W., Chao, L., Lu, H., Xia, F., Wei, Q., Su, Z., Niu, T., Tao, L., Du, B., Li, D., et al. (2021) · Science · doi:10.1126/science.abf7652 · Cited by 806
Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Engineering Stress in Perovskite Solar Cells to Improve Stability
Rolston, N., Bush, K. A., Printz, A. D., Gold‐Parker, A., Ding, Y., Toney, M. F., McGehee, M. D., & Dauskardt, R. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802139 · Cited by 516
Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability
Wang, H., Zhu, C., Liu, L., Ma, S., Liu, P., Wu, J., Shi, C., Du, Q., Hao, Y., Xiang, S., et al. (2019) · Advanced Materials · doi:10.1002/adma.201904408 · Cited by 499
Guerrero, A., Garcia-Belmonte, G., Mora-Sero, I., Bisquert, J., Kang, Y. S., Jacobsson, T. J., Correa-Baena, J.-P., & Hagfeldt, A. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b01728 · Cited by 498
The Main Progress of Perovskite Solar Cells in 2020–2021
Wu, T., Qin, Z., Wang, Y., Wu, Y., Chen, W., Zhang, S., Cai, M., Dai, S., Zhang, J., Liu, J., et al. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00672-w · Cited by 446
Self-citationBuried Interfaces in Halide Perovskite Photovoltaics
Yang, X., Luo, D., Xiang, Y., Zhao, L., Anaya, M., Shen, Y., Wu, J., Yang, W., Chiang, Y., Tu, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202006435 · Cited by 443
Feng, J. (2014) · APL MATERIALS · doi:10.1063/1.4885256 · Cited by 395
Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells
Jung, E. H., Chen, B., Bertens, K., Vafaie, M., Teale, S., Proppe, A., Hou, Y., Zhu, T., Zheng, C., & Sargent, E. H. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01566 · Cited by 389
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Deng, Y., Xu, S., Chen, S., Xiao, X., Zhao, J., & Huang, J. (2021) · Nature Energy · doi:10.1038/s41560-021-00831-8 · Cited by 331
Self-citationDong, Q., Zhu, C., Chen, M., Jiang, C., Guo, J., Feng, Y., Dai, Z., Yadavalli, S. K., Hu, M., Cao, X., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21292-3 · Cited by 299
Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency
Seo, J., Matsui, T., Luo, J., Correa‐Baena, J., Giordano, F., Saliba, M., Schenk, K., Ummadisingu, A., Domanski, K., Hadadian, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600767 · Cited by 274
Critical review of recent progress of flexible perovskite solar cells
Zhang, J., Zhang, W., Cheng, H.-M., & Silva, S. R. P. (2020) · Materials Today · doi:10.1016/j.mattod.2020.05.002 · Cited by 248
Dong, Q., Chen, M., Liu, Y., Eickemeyer, F. T., Zhao, W., Dai, Z., Yin, Y., Jiang, C., Feng, J., Jin, S., et al. (2021) · Joule · doi:10.1016/j.joule.2021.04.014 · Cited by 244
Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation
Bush, K. A., Rolston, N., Gold-Parker, A., Manzoor, S., Hausele, J., Yu, Z. J., Raiford, J. A., Cheacharoen, R., Holman, Z. C., Toney, M. F., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00544 · Cited by 225
Yang, N., Zhu, C., Chen, Y., Zai, H., Wang, C., Wang, X., Wang, H., Ma, S., Gao, Z., Wang, X., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01736a · Cited by 219
High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer
Huang, K., Peng, Y., Gao, Y., Shi, J., Li, H., Mo, X., Huang, H., Gao, Y., Ding, L., & Yang, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901419 · Cited by 218
Superior Carrier Lifetimes Exceeding 6 µs in Polycrystalline Halide Perovskites
Yang, X., Fu, Y., Su, R., Zheng, Y., Zhang, Y., Yang, W., Yu, M., Chen, P., Wang, Y., Wu, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202002585 · Cited by 207
Chung, J., Shin, S. S., Hwang, K., Kim, G., Kim, K. W., Lee, D. S., Kim, W., Ma, B. S., Kim, Y.-K., Kim, T.-S., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02164d · Cited by 198
Depth-dependent defect manipulation in perovskites for high-performance solar cells
Zhang, Y., Wang, Y., Zhao, L., Yang, X., Hou, C.-H., Wu, J., Su, R., Jia, S., Shyue, J.-J., Luo, D., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02287c · Cited by 184
Yang, L., Xiong, Q., Li, Y., Gao, P., Xu, B., Lin, H., Li, X., & Miyasaka, T. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta10717d · Cited by 181
Low‐Bandgap Organic Bulk‐Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells
Wu, S., Li, Z., Zhang, J., Wu, X., Deng, X., Liu, Y., Zhou, J., Zhi, C., Yu, X., Choy, W. C. H., et al. (2021) · Advanced Materials · doi:10.1002/adma.202105539 · Cited by 159
Thermo-mechanical behavior of organic-inorganic halide perovskites for solar cells
Ramírez, C., Yadavalli, S. K., Garcés, H. F., Zhou, Y., & Padture, N. P. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.02.022 · Cited by 151
Yuan, R., Cai, B., Lv, Y., Gao, X., Gu, J., Fan, Z., Liu, X., Yang, C., Liu, M., & Zhang, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01519b · Cited by 151
Self-citationZhao, H., Chen, H., Bai, S., Kuang, C., Luo, X., Teng, P., Yin, C., Zeng, P., Hou, L., Yang, Y., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00812 · Cited by 135
Self-citationSong, S., Park, E. Y., Ma, B. S., Kim, D. J., Park, H. H., Kim, Y. Y., Shin, S. S., Jeon, N. J., Kim, T., & Seo, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003382 · Cited by 103
Wang, W., Chen, P., Chiang, C., Guo, T., Wu, C., & Feng, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909755 · Cited by 94
Dai, Z., Yadavalli, S. K., Hu, M., Chen, M., Zhou, Y., & Padture, N. P. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.03.044 · Cited by 63
Li, Y., Zhang, C., Ling, S., Ma, C., Zhang, J., Jiang, Y., Zhao, R., Li, H., Lu, J., & Zhang, Q. (2021) · Small · doi:10.1002/smll.202100102 · Cited by 39
Progress in flexible perovskite solar cells with improved efficiency
Kong, H., Sun, W., & Zhou, H. (2021) · Journal of Semiconductors · doi:10.1088/1674-4926/42/10/101605 · Cited by 29
Cited by
Buried interface molecular hybrid for inverted perovskite solar cells
Liu, S., Li, J., Xiao, W., Chen, R., Sun, Z., Zhang, Y., Lei, X., Hu, S., Kober-Czerny, M., Wang, J., et al. (2024) · Nature · doi:10.1038/s41586-024-07723-3 · Cited by 1,090
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Self-citationHomogeneous crystallization and buried interface passivation for perovskite tandem solar modules
Gao, H., Xiao, K., Lin, R., Zhao, S., Wang, W., Dayneko, S., Duan, C., Ji, C., Sun, H., Bui, A. D., et al. (2024) · Science · doi:10.1126/science.adj6088 · Cited by 332
Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications
Song, F., Zheng, D., Feng, J., Liu, J., Ye, T., Li, Z., Wang, K., Liu, S. (., & Yang, D. (2024) · Advanced Materials · doi:10.1002/adma.202312041 · Cited by 113
Metadata
- Authors
- Zheng, Z., Li, F., Gong, J., Ma, Y., Gu, J., Liu, X., Chen, S., & Liu, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-04-24
- Volume
- 34
- Issue
- 21
- Pages
- e2109879-e2109879
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4224436921
- Cited by
- 316
- References
- 43
- FWCI
- 18.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.