Programming Cellular Alignment in Engineered Cardiac Tissue via Bioprinting Anisotropic Organ Building Blocks
The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
The ability to replicate the 3D myocardial architecture found in human hearts is a grand challenge. Here, the fabrication of aligned cardiac tissues via bioprinting anisotropic organ building blocks (aOBBs) composed of human induced pluripotent stem cell derived cardiomyocytes (hiPSC‐CMs) is reported. A bioink composed of contractile cardiac aOBBs is first generated and aligned cardiac tissue sheets with linear, spiral, and chevron features are printed. Next, aligned cardiac macrofilaments are printed, whose contractile force and conduction velocity increase over time and exceed the performance of spheroid‐based cardiac tissues. Finally, the ability to spatially control the magnitude and direction of contractile force by printing cardiac sheets with different aOBB alignment is highlighted. This research opens new avenues to generating functional cardiac tissue with high cell density and complex cellular alignment.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“As a result, bridging the length scales from the micro- and nanometer scale to the centimeter scale to induce both intra- and intercellular organization within engineered heart models remains a major challenge in 3D printing functional organs and tissues32, 34, 35.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [35]
In the citing paper
“The critical point to generate functional cardiac and vascular tissues is to recapitulate the physiologically relevant, highly aligned and densely packed cellular arrangement, eliciting the tight intercellular connections that govern their concerted biological activity 1,28 .”
From Leaf-venation-directed cellular alignment for macroscale cardiac constructs with tissue-like functionalities (2023) · cites this paper as [28]
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citationLian, X., Zhang, J., Azarin, S. M., Zhu, K., Hazeltine, L. B., Bao, X., Hsiao, C., Kamp, T. J., & Palecek, S. P. (2013) · Nature Protocols · doi:10.1038/nprot.2012.150 · Cited by 1,748
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citationBiomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Self-citationTissue Engineering of a Differentiated Cardiac Muscle Construct
Zimmermann, W.-H., Schneiderbanger, K., Schubert, P., Didié, M., Münzel, F., Heubach, J. F., Kostin, S., Neuhuber, W. L., & Eschenhagen, T. (2002) · Circulation Research · doi:10.1161/hh0202.103644 · Cited by 917
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Self-citationEnsembles of engineered cardiac tissues for physiological and pharmacological study: Heart on a chip
Grosberg, A., Alford, P. W., McCain, M. L., & Parker, K. K. (2011) · Lab on a Chip · doi:10.1039/c1lc20557a · Cited by 544
Nanofiber‐reinforced polymers prepared by fused deposition modeling
Shofner, M. L., Lozano, K., Rodríguez‐Macías, F. J., & Barrera, E. V. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12496 · Cited by 484
Wu, Y., Wang, L., Guo, B., & Ma, P. X. (2017) · ACS Nano · doi:10.1021/acsnano.7b01062 · Cited by 472
Microfabricated tissue gauges to measure and manipulate forces from 3D microtissues
Legant, W. R., Pathak, A., Yang, M. T., Deshpande, V. S., McMeeking, R. M., & Chen, C. S. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0900174106 · Cited by 434
Research works printed but not linked: 2
- Garcia‐Canadilla P., 2018, Circ.: Cardiovasc. Imaging, 11
- Mahajan C., 2015, IISE Annu. Conf. Proc., 2953
Cited by
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Biofabrication methods for reconstructing extracellular matrix mimetics
Aazmi, A., Zhang, D., Mazzaglia, C., Yu, M., Wang, Z., Yang, H., Huang, Y. Y. S., & Ma, L. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.08.018 · Cited by 130
Fang, Y., Guo, Y., Wu, B., Liu, Z., Ye, M., Xu, Y., Ji, M., Chen, L., Lu, B., Nie, K., et al. (2023) · Advanced Materials · doi:10.1002/adma.202205082 · Cited by 155
Granular Hydrogels in Biofabrication: Recent Advances and Future Perspectives
Daly, A. C. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301388 · Cited by 156
Alaoui, C. H., Réthoré, G., Weiss, P., & Fatimi, A. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms241713493 · Cited by 111
Organs-on-a-chip: a union of tissue engineering and microfabrication
Zhao, Y., Wang, E. Y., Lai, F. B. L., Cheung, K., & Radisic, M. (2023) · Trends in Biotechnology · doi:10.1016/j.tibtech.2022.12.018 · Cited by 93
3D Printing of Self‐Assembling Nanofibrous Multidomain Peptide Hydrogels
Farsheed, A. C., Thomas, A. J., Pogostin, B. H., & Hartgerink, J. D. (2023) · Advanced Materials · doi:10.1002/adma.202210378 · Cited by 85
Alam, A. M. M. N., Kim, C.-J., Kim, S.-H., Kumari, S., Lee, E.-Y., Hwang, Y.-H., & Joo, S.-T. (2024) · Food Research International · doi:10.1016/j.foodres.2024.114549 · Cited by 70
Ewoldt, J. K., DePalma, S. J., Jewett, M. E., Karakan, M. Ç., Lin, Y.-M., Hashemian, P. M., Gao, X., Lou, L., McLellan, M. A., Tabares, J., et al. (2024) · Nature Methods · doi:10.1038/s41592-024-02480-7 · Cited by 70
“In EHT platforms, increasing passive tension, or afterload, modulated by pillar stiffness has generally been shown to improve tissue formation, CM alignment and functional maturation 96,112 .”
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 69
“A multitude of cardiac structures have been created through the application of bioprinting, aimed at reconstructing different components of the human heart, including the myocardium [108,109], vasculature [110,111], and heart valves [112].”
InfluentialPramanick, A., Hayes, T., Sergis, V., McEvoy, E., Pandit, A. S., & Daly, A. C. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202414559 · Cited by 67
Jia, X., Liu, W., Ai, Y., Cheung, S., Hu, W., Wang, Y., Shi, X., Zhou, J., Zhang, Z., & Liang, Q. (2024) · Advanced Materials · doi:10.1002/adma.202404071 · Cited by 58
Advances in cardiac tissue engineering and heart‐on‐a‐chip
Kieda, J., Shakeri, A., Landau, S., Wang, E. Y., Zhao, Y., Lai, B. F., Okhovatian, S., Wang, Y., Jiang, R., & Radisic, M. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37633 · Cited by 56
Zhang, F., Cheng, H., Qu, K.-Y., Qian, X., Lin, Y., Zhang, Y., Qian, S.-C., Huang, N., Cui, C., & Chen, M. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100626 · Cited by 53
“The contractile force generated by the cardiac tissues is similar to many other reports, ranging from 10 to 100 μN [25,54].”
Invertible neural networks for real-time control of extrusion additive manufacturing
Roach, D. J., Rohskopf, A., Leguizamon, S., Appelhans, L. N., & Cook, A. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103742 · Cited by 52
Emerging trends in humidity-responsive 4D bioprinting
Mandal, A., & Chatterjee, K. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140550 · Cited by 51
Emerging technologies for cardiac tissue engineering and artificial hearts
Sun, L., Wang, Y., Xu, D., & Zhao, Y. (2023) · Smart Medicine · doi:10.1002/smmd.20220040 · Cited by 44
Advances in 3D Bioprinted Cardiac Tissue Using Stem Cell-Derived Cardiomyocytes
Bliley, J. M., Stang, M. A., Behre, A., & Feinberg, A. W. (2024) · Stem Cells Translational Medicine · doi:10.1093/stcltm/szae014 · Cited by 44
“30 OBBs have also been used in sacrificial writing into functional tissue (SWIFT) bioprinting, where a sacrificial gelatin ink is extruded into a compacted slurry of cardiomyocyte OBBs, ECM, and fibroblasts (Fig.”
MethodMao, M., Qu, X., Zhang, Y., Gu, B., Li, C., Liu, R., Li, X., Zhu, H., He, J., & Li, D. (2023) · Nature Communications · doi:10.1038/s41467-023-37716-1 · Cited by 42
“…tissues using HUVECs The critical point to generate functional cardiac and vascular tissues is to recapitulate the physiologically relevant, highly aligned and densely packed cellular arrangement, eliciting the tight intercellular connections thatgovern their concerted biological activity 1,28 .”
FRESH™ 3D bioprinted cardiac tissue, a bioengineered platform for in vitro pharmacology
Finkel, S., Sweet, S., Locke, T., Smith, S., Wang, Z., Sandini, C., Imredy, J. P., He, Y., Durante, M. R., Lagrutta, A., et al. (2023) · APL Bioengineering · doi:10.1063/5.0163363 · Cited by 41
Dai, S., Zhu, K., Wang, S., & Deng, Z. (2025) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.02.038 · Cited by 40
Kim, M. S., Choi, Y., & Lee, K. Y. (2025) · Polymers · doi:10.3390/polym17172337 · Cited by 39
Engineering Cardiac Tissue for Advanced Heart‐On‐A‐Chip Platforms
Chen, X., Liu, S., Han, M., Long, M., Li, T., Hu, L., Wang, L., Huang, W., & Wu, Y. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301338 · Cited by 38
Three-Dimensional Bioprinting in Cardiovascular Disease: Current Status and Future Directions
Sun, Z., Zhao, J., Leung, E. W., Flandes‐Iparraguirre, M., Vernon, M. J., Silberstein, J., De‐Juan‐Pardo, E. M., & Jansen, S. J. (2023) · Biomolecules · doi:10.3390/biom13081180 · Cited by 37
“The cardiac constructs contracted synchronously and with greater force than spheroid-based controls and could sustain pacing up to 3 Hz [161].”
Tunable Macroscopic Alignment of Self-Assembling Peptide Nanofibers
Farsheed, A. C., Delgado, C. Z., Yu, L. T., Saeidifard, S., Swain, J. W. R., Makhoul, J. T., Thomas, A. J., Cole, C. C., Huitron, E. I. G., Grande-Allen, K. J., et al. (2024) · ACS Nano · doi:10.1021/acsnano.4c02030 · Cited by 36
Liang, Q., Chen, S., Hua, S., Jiang, W., Zhan, J., Pu, C., Lin, R., He, Y., Hou, H., & Qiu, X. (2024) · Advanced Science · doi:10.1002/advs.202400002 · Cited by 35
A dive into the bath: embedded 3D bioprinting of freeform in vitro models
Öztürk-Öncel, M. Ö., Leal-Martínez, B. H., Monteiro, R. F., Gomes, M. E., & Domingues, R. M. A. (2023) · Biomaterials Science · doi:10.1039/d3bm00626c · Cited by 35
Yücer, S., Sarac, B., & Çiftçi, F. (2025) · Bioengineering & Translational Medicine · doi:10.1002/btm2.70080 · Cited by 34
Recent Advancements of Bioinks for 3D Bioprinting of Human Tissues and Organs
He, W., Deng, J., Ma, B., Tao, K., Zhang, Z., Ramakrishna, S., Yuan, W., & Ye, T. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00806 · Cited by 34
Mousavi, A., Hedayatnia, A., Vliet, P. P. V., Dartora, D. R., Wong, N., Rafatian, N., Nuyt, A. M., Moraes, C., Ajji, A., Andelfinger, G., et al. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.102035 · Cited by 34
Tailored Polypeptide Star Copolymers for 3D Printing of Bacterial Composites Via Direct Ink Writing
Murphy, R. D., Garcia, R. V., Oh, S. J., Wood, T., Jo, K. D., de Alaniz, J. R., Perkins, E., & Hawker, C. J. (2022) · Advanced Materials · doi:10.1002/adma.202207542 · Cited by 32
3D Printing Approaches to Engineer Cardiac Tissue
Lu, T.-Y., Xiang, Y., Tang, M., & Chen, S. (2023) · Current Cardiology Reports · doi:10.1007/s11886-023-01881-y · Cited by 32
The Interface of Gene Editing with Regenerative Medicine
Farag, V., Devey, E. A., & Leong, K. W. (2024) · Engineering · doi:10.1016/j.eng.2024.10.019 · Cited by 31
Dynamic bioinks for tissue/organ bioprinting: Principle, challenge, and perspective
Ma, D., Lu, W. W., Liu, W., Liu, W., & Ruan, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101527 · Cited by 31
Bioprinting Using Organ Building Blocks: Spheroids, Organoids, and Assembloids
Baptista, L. S., Mironov, V. A., Koudan, E. V., Amorim, É. A., Pampolha, T. P., Kasyanov, V. A., Kovalev, A., Senatov, F. S., & Granjeiro, J. M. (2023) · Tissue Engineering Part A · doi:10.1089/ten.tea.2023.0198 · Cited by 31
“33 Their inherent ability to fuse has sparked discussions about their use in modular tissue engineering as building blocks, 34,35 and more recently as OBB.”
Advances in Cell‐Rich Inks for Biofabricating Living Architectures
Almeida‐Pinto, J., Moura, B. S., Gaspar, V. M., & Mano, J. F. (2024) · Advanced Materials · doi:10.1002/adma.202313776 · Cited by 30
Mao, M., Han, K., Gao, J., Ren, Z., Zhang, Y., He, J., & Li, D. (2025) · Advanced Materials · doi:10.1002/adma.202419380 · Cited by 30
Suspension bath bioprinting and maturation of anisotropic meniscal constructs
Prendergast, M. E., Heo, S., Mauck, R. L., & Burdick, J. A. (2023) · Biofabrication · doi:10.1088/1758-5090/acc3c3 · Cited by 28
“Few other studies of bioprinted anisotropic scaffolds have measured depth-dependent cellular alignment, especially over long culture periods such as for 56 d [47, 48, 50].”
Design considerations for digital light processing bioprinters
Garciamendez‐Mijares, C. E., Aguilar, F. J. R., Hernández, P., Kuang, X., Gonzalez, M., Ortiz-Padilla, V. E., Riesgo, R. A., Ruiz, D. S. R., Rivera, V. A. M., Rodriguez, J. C., et al. (2024) · Applied Physics Reviews · doi:10.1063/5.0187558 · Cited by 29
Skeletal Muscle Spheroids as Building Blocks for Engineered Muscle Tissue
Johnson, N., Filler, A. C., Sethi, A., Smith, L., & Leach, J. K. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01078 · Cited by 27
3D-bioprinting of patient-derived cardiac tissue models for studying congenital heart disease
Wolfe, J. T., He, W., Kim, M.-S., Liang, H.-L., Shradhanjali, A., Jurkiewicz, H., Freudinger, B. P., Greene, A. S., LaDisa, J. F., Tayebi, L., et al. (2023) · Frontiers in Cardiovascular Medicine · doi:10.3389/fcvm.2023.1162731 · Cited by 25
Microengineering 3D Collagen Matrices with Tumor‐Mimetic Gradients in Fiber Alignment
Joshi, I. M., Mansouri, M., Ahmed, A., Silva, D. D., Simon, R. A., Esmaili, P., Desa, D. E., Elias, T. M., Brown, E. B., & Abhyankar, V. V. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308071 · Cited by 25
Utilizing bioprinting to engineer spatially organized tissues from the bottom-up
Zhan, Y., Jiang, W., Liu, Z., Wang, Z., Guo, K., & Sun, J. (2024) · Stem Cell Research & Therapy · doi:10.1186/s13287-024-03712-5 · Cited by 25
“Several studies involving building blocks of tissues have illustrated the effectiveness of ‘bottom-up’ [16, 19, 22, 23, 38].”
BackgroundLou, L., Rubfiaro, A. S., Deng, V., He, J. M., Thomas, T., Roy, M., Dickerson, D. A., & Agarwal, A. K. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c06505 · Cited by 26
iPS cell therapy 2.0: Preparing for next‐generation regenerative medicine
Hui, K. K., & Yamanaka, S. (2024) · BioEssays · doi:10.1002/bies.202400072 · Cited by 24
Developing 3D bioprinting for organs-on-chips
Wu, Z., Liu, R., Shao, N., & Zhao, Y. (2025) · Lab on a Chip · doi:10.1039/d4lc00769g · Cited by 24
Zeng, Q., Yang, Y., Wang, H., Tan, Y., Wang, Z., Chai, M., Lu, Z., He, S., Yang, H., Zhang, J. Z., et al. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123573 · Cited by 24
Bioprinting approaches in cardiac tissue engineering to reproduce blood-pumping heart function
Kim, M. J., Hwang, D. G., & Jang, J. (2024) · iScience · doi:10.1016/j.isci.2024.111664 · Cited by 22
Nanoengineered extrusion-aligned tract bioprinting enables functional repair of spinal cord injuries
Huang, W., Chen, S., Li, K., Ding, Y., Zhan, B., Zhao, D., Xu, G., Guo, H., Sun, C., Yuan, R., et al. (2026) · Cell stem cell · doi:10.1016/j.stem.2025.12.021 · Cited by 22
Spagnuolo, F. D., Kronemberger, G. S., Storey, K. J., & Kelly, D. J. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.01.024 · Cited by 20
Gerardo‐Nava, J., Jansen, J., Günther, D., Klasen, L., Thiebes, A. L., Nießing, B., Bergerbit, C., Meyer, A. A., Linkhorst, J., Barth, M., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301030 · Cited by 20
3D Prestress Bioprinting of Directed Tissues
Li, Y., Wu, J., He, C., He, H., Xie, M., Yao, K., He, J., Duan, Y., Zhaung, L., Wang, P., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301487 · Cited by 19
Bax, M., Thorpe, J., & Romanov, V. (2023) · Frontiers in Sensors · doi:10.3389/fsens.2023.1294721 · Cited by 19
Multidirectional Filamented Light Biofabrication Creates Aligned and Contractile Cardiac Tissues
Jones, L. S., Filippi, M., Michelis, M. Y., Balciunaite, A., Yaşa, Ö., Aviel, G., Narciso, M., Freedrich, S., Generali, M., Tzahor, E., et al. (2024) · Advanced Science · doi:10.1002/advs.202404509 · Cited by 19
Kitana, W., Apsite, I., & Ionov, L. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202500450 · Cited by 19
Heart-on-a-chip and vasculature-on-a-chip platforms as models of cardiovascular disease
Khosravi, R., & Radisic, M. (2026) · Nature Reviews Cardiology · doi:10.1038/s41569-026-01255-1 · Cited by 18
“In focal fibrosis models, manual cell seeding introduces inconsistencies in cell distribution 66 , but this issue can potentially be addressed through the use of 3D bioprinting to increase tissue complexity 76 .”
Bridging the Gap in Ashby’s Map for Soft Material Properties for Tissue Engineering
Lou, L., Paolino, L., & Agarwal, A. K. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04331 · Cited by 18
Organoids and tissue/organ chips
Seán, G. B., Banes, A. J., & Gangaraju, R. (2024) · Stem Cell Research & Therapy · doi:10.1186/s13287-024-03859-1 · Cited by 18
“This article examines the dichotomy between top-down and bottom-up strategies [5–7].”
Background3D printing in biofabrication: From surface textures to biological engineering
Ma, Z., Wang, J., Qin, L., & Chortos, A. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156477 · Cited by 17
Acoustic Bioprinting: A Glimpse Into an Emerging Field
Garciamendez‐Mijares, C. E., Ruiz, D. S. R., Kuang, X., Halabe, A. S. G., Gonzalez, B. S., Ruiz, C. G. R., Mestre, F. L., Nunes, F. C., & Zhang, Y. S. (2025) · Small Methods · doi:10.1002/smtd.202500733 · Cited by 17
Sun, Z., Silberstein, J., & Vaccarezza, M. (2024) · Journal of Cardiovascular Development and Disease · doi:10.3390/jcdd11010022 · Cited by 16
Advances in precise cell manipulation
Ma, Y., Liang, Z., Chen, Y., & Wang, J. (2025) · Droplet · doi:10.1002/dro2.149 · Cited by 16
Pourchet, L., Casado-Medina, L., Richaud‐Patín, Y., Tadevosyan, K., Morillas-García, A., Lorenzo, E., Lazis, I., Ventura, A., Litowczenko, J., Guiu, J., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/add627 · Cited by 17
Cedillo‐Servín, G., Al-Jehani, E. A. A., Rossy, T., Teixeira, S. P. B., Sage, F., Domingues, R. M. A., Raman, R., & Castilho, M. D. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.05.004 · Cited by 16
Marino, S., Al-Hijailan, R. S., Alonaizan, R., Gabetti, S., Massai, D., & Pesce, M. (2025) · Gels · doi:10.3390/gels11080593 · Cited by 16
“However, fibrin’s low viscosity and weak mechanics pose challenges for standalone use and necessitate blending with materials like gelatin [50,57], alginate [58], and hyaluronic acid [59] to enhance stability and structural integrity.”
3D Bioprinting Functional Engineered Heart Tissues
Leung, M. C., & Laksman, Z. (2025) · International Journal of Molecular Sciences · doi:10.3390/ijms262110707 · Cited by 15
“By varying printing patterns, structural designs, and the compositions or combinations of cells and biomaterials within a single construct, researchers can systematically investigate how these factors influence tissue behavior [38].”
InfluentialPark, E., Hwang, D. G., Choi, H., Kim, D., Ahn, J., Lee, Y.-J., Eom, T. J., Jang, J., & Kim, C. (2026) · Light Science & Applications · doi:10.1038/s41377-025-02117-0 · Cited by 15
“Therefore, a quantitative assessment of alignment can be valuable in diagnosing disease, monitoring therapeutic responses, and evaluating the ef fi cacy of tissue engineering models 4,5 .”
Assessing Cardiac Contractility From Single Molecules to Whole Hearts
Garg, A., Lavine, K. J., & Greenberg, M. J. (2023) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2023.07.013 · Cited by 15
Elkhoury, K., Kodeih, S., Enciso‐Martínez, E., Maziz, A., & Bergaud, C. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303288 · Cited by 15
Thomas, D., & Wu, J. C. (2025) · iScience · doi:10.1016/j.isci.2025.113003 · Cited by 16
“63,175,176 One of the major requirements to build a whole human heart is the fabrication of a vascularized myocardial chambers ( ∼ 4– 10 mm thick) that can accurately replicates anatomical and cellular composition capable of sustaining 17%–28% strain, high conduction velocity ( ∼ 50 cm/s), and a…”
Guo, K., Wang, H., Li, S., Chang, P., He, C., Sun, Q., & Zheng, X. (2023) · Biofabrication · doi:10.1088/1758-5090/acc760 · Cited by 15
“…the gel do not possess orientation characteristics [8]; on the other hand, aligned cells, which have been realized by one-direction constraint [ 9–13], mechanical stimulus [14], and polymeric chains orienting by shear force [15, 16], are often structured in pure hydrogels, which may not meet the…”
Organoid bioprinting to pattern the matrix microenvironment
Zhang, D. H., Huerta-López, C., & Heilshorn, S. C. (2025) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2025.100607 · Cited by 14
“Through direct bioprinting, filament and cell alignment can be achieved in many constructs, such as printed heart tissues [11].”
Qiu, Z., Meng, Z., Kasimu, A., Wang, Z., He, P., Wang, L., Zhao, R., Mao, M., Tian, Y., Kong, L., et al. (2025) · Advanced Materials · doi:10.1002/adma.202510222 · Cited by 14
Application of colloidal photonic crystals in study of organoids
Huang, K., Li, Q., Xue, Y., Wang, Q., Chen, Z., & Gu, Z. (2023) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2023.115075 · Cited by 14
Iglesias‐García, O., Flandes‐Iparraguirre, M., Montero‐Calle, P., Rosales, R. M., Ullate‐Agote, A., Sánchez‐Bueno, A., Larequi, E., Lusar, I. A., Laita, N., Oliván‐Viguera, A., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202420106 · Cited by 13
Biocompatible Ink Optimization Enables Functional Volumetric Bioprinting With Xolography
Brauer, E., Balciunaite, A., Kollert, M. R., Weihs, J., Knecht, R. S., Behncke, R. Y., Quach, S., König, N. F., Badolato, A., Monestier, S., et al. (2025) · Advanced Materials · doi:10.1002/adma.202512058 · Cited by 13
Garmroudi, A., Tushar, M. A. K., Liu, C., & Li, Z. (2025) · npj Robotics · doi:10.1038/s44182-025-00056-x · Cited by 13
Bera, A., Rizvi, M. S., Kn, V., & Pati, F. (2024) · Biofabrication · doi:10.1088/1758-5090/ad86ec · Cited by 13
“Alignment of bio-materials has primarily been achieved through the pre-fabrication of organ building blocks using gelatin and fibrinogen [21].”
Construction of stable niches for denitrifiers using 3D bioprinting for efficient nitrogen removal
Liu, Y., Zhao, T., Wu, Y., Niu, J., Chao, C., & Zhao, Y. (2025) · Water Research · doi:10.1016/j.watres.2025.123916 · Cited by 12
Micro/Nanoscale 3D Bioprinting: A Transformative Way to Modulate Cell/Tissue Growth and Function
Meng, Z., Han, K., Huang, X., Yao, C., Gu, B., Gao, J., Zhao, R., & He, J. (2026) · Advanced Materials · doi:10.1002/adma.202515400 · Cited by 12
Hyaluronic acid-based bioink for anisotropic neural tissue cryobioprinting
Andolfi, A., Cai, L., Martínez, M. V. G., Garciamendez‐Mijares, C. E., Rodríguez, F. D. V., Garza, R. G., Kuai, A. R., Kuang, X., Nejjari, J., & Zhang, Y. S. (2025) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/adfeee · Cited by 11
Integrating Hierarchical Vasculature into Engineered Cardiac Tissues
Zhuang, R. Z., Chesnais, F., & Vunjak‐Novakovic, G. (2025) · Advanced Materials · doi:10.1002/adma.202509242 · Cited by 11
A Visual, In‐Expensive, and Wireless Capillary Rheometer for Characterizing Wholly‐Cellular Bioinks
Du, J., Lee, S., Sinha, S., Solberg, F. S., Ho, D. L. L., Sampson, J. P., Wang, Q., Tam, T., & Skylar‐Scott, M. A. (2023) · Small · doi:10.1002/smll.202304778 · Cited by 11
Self-citationLichtenberg, J. Y., Leonard, C. E., Sterling, H. R., Agreda, V. S., & Hwang, P. Y. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00245 · Cited by 11
Anisotropic conductive scaffolds for post-infarction cardiac repair
Li, S., Yin, W., Liu, Y., Yang, C., Zhai, Z., Xie, M., Ye, Z., & Song, X. (2024) · Biomaterials Science · doi:10.1039/d4bm01109k · Cited by 11
Fang, Y., Lu, B., Sun, R., Yang, P., Ye, Y., Ye, M., Zhang, Z., Yang, Y., Liu, Z., Xia, J., et al. (2026) · Cell Biomaterials · doi:10.1016/j.celbio.2025.100306 · Cited by 10
Engineering vascularized organotypic tissues via module assembly
Zhou, Z., Liu, C., Guo, Y., Pang, Y., & Sun, W. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acfcf2 · Cited by 9
Zheng, W., Li, T., Qian, L., Ma, J., Liu, Z., Jin, F., Wei, Z., Wang, T., & Feng, Z. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162550 · Cited by 9
Zhao, Y., Khosravi, R., Cheung, K., Shen, K., Wang, Y., Landau, S., Okhovatian, S., Wu, Q., Lu, R. X. Z., Wagner, K. T., et al. (2025) · Cell Biomaterials · doi:10.1016/j.celbio.2025.100075 · Cited by 9
Bioprinted Excitable Tissues with Multistimulation Systems for Promoting Function and Maturation
Yong, U., Park, J., & Jang, J. (2025) · Advanced NanoBiomed Research · doi:10.1002/anbr.202500107 · Cited by 8
Kumar, A., He, S., & Mali, P. (2023) · APL Bioengineering · doi:10.1063/5.0137458 · Cited by 8
Advancing Cardiac Organoid Engineering Through Application of Biophysical Forces
Blazeski, A., García‐Cardeña, G., & Kamm, R. D. (2024) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2024.3514378 · Cited by 8
“A number of organoid studies have altered ECM composition or patterned cells to confined geometries, affecting their adhesion and the arrangement of their intracellular structural proteins, both of which affect stiffness [69], [70], [71], [72], [73].”
Hybrid biofabrication of neurosecretory structures as a model for neurosecretion
Dai, X., Tian, X., Gu, S., Yang, Y., Li, H., Gao, P., Lan, Q., & Cheng, H. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.659 · Cited by 8
“3D bioprinting tissues has been reported, including 3D-bioprinted liver tissue[14-16], glomerulus[17], myocardial[18], brain[19], and skeletal muscle[20] and has been shown to maintain cell bioactivity, tissue morphological structure, and organoid function.”
Biohybrid printing approaches for cardiac pathophysiological studies
Hwang, D. G., Kang, W., Park, S., & Jang, J. (2024) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2024.116420 · Cited by 8
The Year 2022 in biomaterials research: A perspective from the editors of six leading journals
Stegemann, J. P., Wagner, W. R., Göbel, U., Perets, E., Leong, K. W., Leach, J. K., & Gilbert, J. L. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37529 · Cited by 8
Nabavi, S. F., & Garmestani, H. (2026) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2025.12.035 · Cited by 7
Computational Modeling Meets 3D Bioprinting: Emerging Synergies in Cardiovascular Disease Modeling
Mukherjee, T., Amoli, M. S., Rezapourdamanab, S., Shammas, L. R. E., Tomov, M. L., Mendiola, E. A., Serpooshan, V., & Avazmohammadi, R. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202503034 · Cited by 8
House, A. A., Santillan, A., Correa, E., Youssef, V., & Güvendiren, M. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202402228 · Cited by 7
Huang, M., Liu, S., Zhou, X., Wang, L., & Wu, Y. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.09.011 · Cited by 7
Quantifying HiPSC-CM structural organization at scale with deep learning-enhanced SarcGraph
Mohammadzadeh, S., & Lejeune, E. (2025) · PLoS Computational Biology · doi:10.1371/journal.pcbi.1013436 · Cited by 7
“These cells have the potential to advance a variety of applications, from patient-specific drug testing [9,10], to disease modeling [11,12], to serving as the building blocks for patient-specific engineered heart tissue [13].”
Metadata
- Authors
- Ahrens, J. H., Uzel, S. G. M., Skylar‐Scott, M., Mata, M. M., Lu, A., Kroll, K. T., & Lewis, J. A.
- Affiliations
- Harvard University (US)
- Corresponding author
- Lewis, Jennifer A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-05-25
- Volume
- 34
- Issue
- 26
- Pages
- e2200217-e2200217
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4224238221
- Semantic Scholar
- 4c3b9613a7115243f91f5090b0fe011099e66e04
- Cited by
- 143
- References
- 40
- Citations by year
- 2026: 26 · 2025: 40 · 2024: 35 · 2023: 39 · 2022: 3
- FWCI
- 8.49
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Life Sciences › Biochemistry, Genetics and Molecular Biology › Cell Biology › Cellular Mechanics and Interactions
- Keywords
- cardiac tissue engineering, bioprinting, cell alignment, hiPSC-derived cardiomyocytes, bioinks, myocardial structure, contractile force
- MeSH terms
- Humans, Myocardium, Tissue Engineering, Myocytes, Cardiac, Tissue Scaffolds, Induced Pluripotent Stem Cells, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.