The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Investigating the Superior Performance of Hard Carbon Anodes in Sodium‐Ion Compared With Lithium‐ and Potassium‐Ion Batteries
Open accessAbstract
Emerging sodium‐ion batteries (NIBs) and potassium‐ion batteries (KIBs) show promise in complementing lithium‐ion battery (LIB) technology and diversifying the battery market. Hard carbon is a potential anode candidate for LIBs, NIBs, and KIBs due to its high capacity, sustainability, wide availability, and stable physicochemical properties. Herein, a series of hard carbons is synthesized by hydrothermal carbonization and subsequent pyrolysis at different temperatures to finely tune their structural properties. When tested as anodes, the hard carbons exhibit differing ion‐storage trends for Li, Na, and K, with NIBs achieving the highest reversible capacity. Extensive materials and electrochemical characterizations are carried out to study the correlation of structural features with electrochemical performance and to explain the specific mechanisms of alkali‐ion storage in hard carbons. In addition, the best‐performing hard carbon is tested against a sodium cathode Na 3 V 2(PO 4)3 in a Na‐ion pouch cell, displaying a high power density of 2172 W kg−1 at an energy density of 181.5 Wh kg−1 (based on the total weight of active materials in both anode and cathode). The Na‐ion pouch cell also shows stable ultralong‐term cycling (9000 h or 5142 cycles) and demonstrates the promising potential of such materials as sustainable, scalable anodes for beyond Li‐batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Interpretation of Raman spectra of disordered and amorphous carbon
Ferrari, A. C., & Robertson, J. (2000) · Physical Review B · doi:10.1103/physrevb.61.14095 · Cited by 15,651
Ferrari, A. C. (2007) · Solid State Communications · doi:10.1016/j.ssc.2007.03.052 · Cited by 7,606
Sadezky, A., Muckenhuber, H., Grothe, H., Niessner, R., & Pöschl, U. (2005) · Carbon · doi:10.1016/j.carbon.2005.02.018 · Cited by 4,850
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
A practical beginner’s guide to cyclic voltammetry
Elgrishi, N., Rountree, K. J., McCarthy, B. D., Rountree, E. S., Eisenhart, T. T., & Dempsey, J. L. (2018) · Journal of Chemical Education · doi:10.1021/acs.jchemed.7b00361 · Cited by 4,263
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
Approaching high-performance potassium-ion batteries via advanced design strategies and engineering
Zhang, W., Liu, Y., & Guo, Z. (2019) · Science Advances · doi:10.1126/sciadv.aav7412 · Cited by 1,158
Self-citationAn Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
Self-citationMechanism of lithium insertion in hard carbons prepared by pyrolysis of epoxy resins
Liu, Y., Xue, J. S., Zheng, T., & Dahn, J. R. (1996) · Carbon · doi:10.1016/0008-6223(96)00177-7 · Cited by 732
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Self-citationHard Carbon Anodes for Next‐Generation Li‐Ion Batteries: Review and Perspective
Xie, L., Tang, C., Bi, Z., Song, M., Fan, Y., Yan, C., Li, X., Su, F., Zhang, Q., & Chen, C. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101650 · Cited by 617
Huang, S., Li, Z., Wang, B., Zhang, J., Peng, Z., Qi, R., Wang, J., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706294 · Cited by 585
Graphitic Carbon Nanocage as a Stable and High Power Anode for Potassium‐Ion Batteries
Cao, B., Zhang, Q., Liu, H., Xu, B., Zhang, S., Zhou, T., Mao, J., Pang, W. K., Guo, Z., Li, A., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801149 · Cited by 561
Self-citationTuning the Closed Pore Structure of Hard Carbons with the Highest Na Storage Capacity
Meng, Q., Lu, Y., Ding, F., Zhang, Q., Chen, L., & Hu, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01900 · Cited by 532
Self-citationA revised mechanistic model for sodium insertion in hard carbons
Au, H., Alptekin, H., Jensen, A. C. S., Olsson, E., O’Keefe, C. A., Smith, T., Crespo-Ribadeneyra, M., Headen, T. F., Grey, C. P., Cai, Q., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01363c · Cited by 508
Self-citationRevealing the Intercalation Mechanisms of Lithium, Sodium, and Potassium in Hard Carbon
Alvin, S., Cahyadi, H. S., Hwang, J., Chang, W., Kwak, S. K., & Kim, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000283 · Cited by 452
He, H., Huang, D., Tang, Y., Wang, Q., Ji, X., Wang, H., & Guo, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.009 · Cited by 401
Self-citationThe development of lithium ion secondary batteries
Nishi, Y. (2001) · The Chemical Record · doi:10.1002/tcr.1024 · Cited by 393
Mechanism of Sodium Storage in Hard Carbon: An X‐Ray Scattering Analysis
Morikawa, Y., Nishimura, S., Hashimoto, R., Ohnuma, M., & Yamada, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903176 · Cited by 387
Na 3 V 2 (PO 4 ) 3 : an advanced cathode for sodium-ion batteries
Zhang, X., Rui, X., Chen, D., Tan, H., Yang, D., Huang, S., & Yu, Y. (2019) · Nanoscale · doi:10.1039/c8nr09391a · Cited by 336
The Role of Hydrothermal Carbonization in Sustainable Sodium‐Ion Battery Anodes
Xu, Z., Wang, J., Guo, Z., Xie, F., Liu, H., Yadegari, H., Tebyetekerwa, M., Ryan, M. P., Hu, Y., & Titirici, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200208 · Cited by 328
Self-citationHard carbons for sodium-ion batteries and beyond
Xie, F., Xu, Z., Guo, Z., & Titirici, M.-M. (2020) · Progress in Energy · doi:10.1088/2516-1083/aba5f5 · Cited by 319
Self-citationKubota, K., Shimadzu, S., Yabuuchi, N., Tominaka, S., Shiraishi, S., Abreu-Sepulveda, M., Manivannan, A., Gotoh, K., Fukunishi, M., Dahbi, M., et al. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b05235 · Cited by 313
Stratford, J. M., Kleppe, A., Keeble, D. S., Chater, P. A., Meysami, S. S., Wright, C. M., Barker, J., Titirici, M., Allan, P. K., & Grey, C. P. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c06058 · Cited by 239
Self-citationLei, H., Li, J., Zhang, X., Ma, L., Ji, Z., Wang, Z., Pan, L., Tan, S., & Mai, W. (2022) · InfoMat · doi:10.1002/inf2.12272 · Cited by 196
A high-performance hard carbon for Li-ion batteries and supercapacitors application
Ni, J., Huang, Y., & Gao, L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.047 · Cited by 158
An Ultrahigh‐Power Mesocarbon Microbeads|Na + ‐Diglyme|Na 3 V 2 (PO 4 ) 3 Sodium‐Ion Battery
Wei, Q., Chang, X., Wang, J., Huang, T., Huang, X., Yu, J., Zheng, H., Chen, J., & Peng, D. (2021) · Advanced Materials · doi:10.1002/adma.202108304 · Cited by 134
Olsson, E., Cottom, J. P., Au, H., Guo, Z., Jensen, A. C. S., Alptekin, H., Drew, A. J., Titirici, M., & Cai, Q. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908209 · Cited by 125
Self-citationHuang, X., Guo, W., Liu, S., Li, Y., Qiu, Y., Fang, H., Yang, G., Zhu, K., Yin, Z., Li, Z., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202109109 · Cited by 119
Li, Q., Zhang, J., Zhong, L., Geng, F., Tao, Y., Geng, C., Li, S., Hu, B., & Yang, Q. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201734 · Cited by 117
First-principles study of alkali-metal intercalation in disordered carbon anode materials
Huang, J., Cśanyi, G., Zhao, J., Cheng, J. J., & Deringer, V. L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05453g · Cited by 103
Lee, G., Eui Lee, M., Kim, S.-S., Joh, H.-I., & Lee, S. (2022) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.09.026 · Cited by 87
Alkali metal insertion into hard carbon – the full picture
Euchner, H., Vinayan, B. P., Reddy, M. A., et al. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04868b · Cited by 51
Nagmani, Verma, P., & Puravankara, S. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c02575 · Cited by 44
Trotta, F., Wang, G. J., Guo, Z., Xu, Z., Ribadeneyra, M. C., Au, H., Edge, J. S., Titirici, M., & Lander, L. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200047 · Cited by 35
Self-citationA life cycle assessment of hard carbon anodes for sodium-ion batteries
Liu, H., Xu, Z., Guo, Z., Feng, J., Li, H., Qiu, T., & Titirici, M. (2021) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2020.0340 · Cited by 32
Self-citation
Cited by
Recent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
Hard carbon for sodium-ion batteries: progress, strategies and future perspective
Wu, C., Yang, Y., Zhang, Y., Xu, H., He, X., Wu, X., & Chou, S. (2024) · Chemical Science · doi:10.1039/d4sc00734d · Cited by 320
Metadata
- Authors
- Guo, Z., Xu, Z., Xie, F., Jiang, J., Zheng, K., Alabidun, S., Crespo‐Ribadeneyra, M., Hu, Y., Au, H., & Titirici, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-09-13
- Volume
- 35
- Issue
- 42
- Pages
- e2304091-e2304091
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4385329965
- Cited by
- 264
- References
- 38
- FWCI
- 19.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.