The DOI matches its Crossref record; 299 of the 299 references it cites were found in a registry or an index.
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Abstract
The repair and functional reconstruction of bone defects resulting from severe trauma, surgical resection, degenerative disease, and congenital malformation pose significant clinical challenges. Bone tissue engineering (BTE) holds immense potential in treating these severe bone defects, without incurring prevalent complications associated with conventional autologous or allogeneic bone grafts. 3D printing technology enables control over architectural structures at multiple length scales and has been extensively employed to process biomimetic scaffolds for BTE. In contrast to inert and functional bone grafts, next‐generation smart scaffolds possess a remarkable ability to mimic the dynamic nature of native extracellular matrix (ECM), thereby facilitating bone repair and regeneration. Additionally, they can generate tailored and controllable therapeutic effects, such as antibacterial or antitumor properties, in response to exogenous and/or endogenous stimuli. This review provides a comprehensive assessment of the progress of 3D‐printed smart scaffolds for BTE applications. It begins with an introduction to bone physiology, followed by an overview of 3D printing technologies utilized for smart scaffolds. Notable advances in various stimuli‐responsive strategies, therapeutic efficacy, and applications of 3D‐printed smart scaffolds are discussed. Finally, the review highlights the existing challenges in the development and clinical implementation of smart scaffolds, as well as emerging technologies in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–299 of 299
Low-intensity pulsed ultrasound (LIPUS) for stimulation of bone healing – A narrative review
Harrison, A. J., & Alt, V. (2021) · Injury · doi:10.1016/j.injury.2021.05.002 · Cited by 95
Levato, R., Lim, K. S., Li, W., Urigoitia-Asua, A., Peña, L. B., Wang, M., Falandt, M., Bernal, P. N., Gawlitta, D., Zhang, Y. S., et al. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100162 · Cited by 95
Tian, J., Luo, Y., Huang, L., Feng, Y., Ju, H., & Yu, B. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2016.02.018 · Cited by 93
Saberi, A., Kouhjani, M., Mohammadi, M., & Hosta‐Rigau, L. (2023) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-02115-7 · Cited by 93
Musculoskeletal tissue engineering: Regional gene therapy for bone repair
Collon, K. W., Gallo, M. C., & Lieberman, J. R. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.120901 · Cited by 90
Ultrasound-Triggered In Situ Photon Emission for Noninvasive Optogenetics
Wang, W., Wu, X., Tang, K. W. K., Pyatnitskiy, I., Taniguchi, R., Lin, P., Zhou, R., Capocyan, S. L. C., Hong, G., & Wang, H. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.2c10666 · Cited by 90
Fatigue behaviour of load-bearing polymeric bone scaffolds: A review
Bakhtiari, H., Nouri, A., Khakbiz, M., & Tolouei‐Rad, M. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.09.048 · Cited by 90
Hao, M., Shen, R., Zhang, W., Lin, Z., Wang, H., Yang, L., Liu, X., & Lin, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007188 · Cited by 88
Advanced Hydrogel systems for mandibular reconstruction
Guo, J., Yao, H., Li, X., Chang, L., Wang, Z., Zhu, W., Su, Y., Qin, L., & Xu, J. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.08.001 · Cited by 88
Self-citationAytaç, Z., Dubey, N., Daghrery, A., Ferreira, J. A., Araújo, I. J. D. S., Castilho, M. D., Malda, J., & Bottino, M. C. (2021) · International Materials Reviews · doi:10.1080/09506608.2021.1946236 · Cited by 86
Gasser, J. A., & Kneissel, M. (2017) · Molecular and integrative toxicology · doi:10.1007/978-3-319-56192-9_2 · Cited by 83
Skeletal regeneration for segmental bone loss: Vascularised grafts, analogues and surrogates
Dalisson, B., Charbonnier, B., Aoude, A., Gilardino, M. S., Harvey, E. J., Makhoul, N. M., & Barralet, J. E. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.09.053 · Cited by 83
Application of Piezoelectric Material and Devices in Bone Regeneration
Yang, C., Ji, J., Lv, Y., Li, Z., & Luo, D. (2022) · Nanomaterials · doi:10.3390/nano12244386 · Cited by 83
Risk factors in bone augmentation procedures
Moy, P. K., & Aghaloo, T. L. (2019) · Periodontology 2000 · doi:10.1111/prd.12285 · Cited by 82
In vivo bone regeneration assessment of offset and gradient melt electrowritten (MEW) PCL scaffolds
Abbasi, N., Lee, R. S. B., Ivanovski, S., Love, R. M., & Hamlet, S. M. (2020) · Biomaterials Research · doi:10.1186/s40824-020-00196-1 · Cited by 82
Wang, S., Hu, T., Wang, G., Wang, Z., Yan, D., Liang, R., & Tan, C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129458 · Cited by 82
He, N., Wang, X., Shi, L., Li, J., Mo, L., Chen, F., Huang, Y., Liu, H., Zhu, X., Zhu, W., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38838-2 · Cited by 82
Self-citationBi, Z., Cai, Y., Shi, X., Chen, J., Li, D., Zhang, P., & Liu, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150631 · Cited by 82
Nanostructured biocomposite films of high toughness based on native chitin nanofibers and chitosan
Mushi, N. E., Utsel, S., & Berglund, L. A. (2014) · Frontiers in Chemistry · doi:10.3389/fchem.2014.00099 · Cited by 81
Stimuli-sensitive drug delivery systems for site-specific antibiotic release
Nazir, F., Tabish, T. A., Tariq, F., Iftikhar, S., Wasim, R., & Shahnaz, G. (2022) · Drug Discovery Today · doi:10.1016/j.drudis.2022.02.014 · Cited by 80
Kannan, M. B., Moore, C., Saptarshi, S., Somasundaram, S., Rahuma, M., & Lopata, A. L. (2017) · Scientific Reports · doi:10.1038/s41598-017-15873-w · Cited by 79
Periosteal Tissue Engineering: Current Developments and Perspectives
Lou, Y., Wang, H., Ye, G., Li, Y., Liu, C., Yu, M., & Ying, B. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100215 · Cited by 77
Materials‐Mediated In Situ Physical Cues for Bone Regeneration
Liu, S., Zhang, L., Li, Z., Gao, F., Zhang, Q., Bianco, A., Liu, H., Ge, S., & Ma, B. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202306534 · Cited by 77
Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters
Barba, A., Díez-Escudero, A., Español, M., Bonany, M., Sadowska, J. M., Guillem‐Marti, J., Öhman‐Mägi, C., Persson, C., Manzanares‐Céspedes, M. C., Franch, J., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b20749 · Cited by 75
Cheung, W., Chow, S. K., Sun, M.-H., Qin, L., & Leung, K. (2011) · Ultrasound in Medicine & Biology · doi:10.1016/j.ultrasmedbio.2010.11.016 · Cited by 74
Smart scaffolds in tissue regeneration
Ahadian, S., & Khademhosseini, A. (2018) · Regenerative Biomaterials · doi:10.1093/rb/rby007 · Cited by 74
Next-generation imaging of the skeletal system and its blood supply
Grüneboom, A., Kling, L., Christiansen, S. H., Mill, L., Maier, A., Engelke, K., Quick, H. H., Schett, G. A., & Gunzer, M. (2019) · Nature Reviews Rheumatology · doi:10.1038/s41584-019-0274-y · Cited by 74
Deng, Y., Shi, X., Chen, Y., Yang, W., Ma, Y., Shi, X., Song, P., Dargusch, M. S., & Chen, Z. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02107 · Cited by 74
Microenvironment-responsive nanocarriers for targeted bone disease therapy
Li, M., Yu, B., Wang, S., Zhou, F., Cui, J., & Su, J. (2023) · Nano Today · doi:10.1016/j.nantod.2023.101838 · Cited by 72
He, M., Zhu, C., Sun, D., Liu, Z., Du, M., Huang, Y. X., Huang, L., Wang, J., Liu, L., Li, Y., et al. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110266 · Cited by 71
Deiana, M., Castán, J. M. A., Josse, P., Kahsay, A. G., Sánchez, D. P., Morice, K., Gillet, N., Ravindranath, R., Patel, A. K., Sengupta, P., et al. (2023) · Nucleic Acids Research · doi:10.1093/nar/gkad365 · Cited by 68
He, Y., Li, F., Jiang, P., Cai, F., Lin, Q., Zhou, M., Liu, H., & Yan, F. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.08.012 · Cited by 67
Zennifer, A., Subramanian, A., & Sethuraman, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00205 · Cited by 66
Deep learning study of tyrosine reveals that roaming can lead to photodamage
Westermayr, J., Gastegger, M., Vörös, D., Panzenboeck, L., Joerg, F., González, L., & Marquetand, P. (2022) · Nature Chemistry · doi:10.1038/s41557-022-00950-z · Cited by 66
Biomaterials by design: Harnessing data for future development
Xue, K., Wang, F., Suwardi, A., Han, M., Teo, P., Wang, P., Wang, S., Ye, E., Li, Z., & Loh, X. J. (2021) · Materials Today Bio · doi:10.1016/j.mtbio.2021.100165 · Cited by 65
Vat Photopolymerization Additive Manufacturing Technology for Bone Tissue Engineering Applications
Bahati, D., Bricha, M., & Mabrouk, K. E. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200859 · Cited by 64
Locally sourced: site-specific immune barriers to metastasis
Correia, A. L. (2023) · Nature reviews. Immunology · doi:10.1038/s41577-023-00836-2 · Cited by 64
Liu, X., Gaihre, B., Park, S., Li, L., Dashtdar, B., Potes, M. D. A., Terzic, A., Elder, B. D., & Lu, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.03.021 · Cited by 64
DLP-based bioprinting of void-forming hydrogels for enhanced stem-cell-mediated bone regeneration
Tao, J., Zhu, S., Liao, X., Wang, Y., Zhou, N., Li, Z., Wan, H., Tang, Y., Yang, S., Du, T., et al. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100487 · Cited by 63
Biofabricating the vascular tree in engineered bone tissue
de Silva, L. S., Bernal, P. N., Rosenberg, A. J. W. P., Malda, J., Levato, R., & Gawlitta, D. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.051 · Cited by 62
Shao, L., Li, Q., Zhao, C., Lu, J., Li, X., Chen, L., Deng, X., Ge, G., & Wu, Y. F. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.021 · Cited by 61
Systemic administration of enzyme-responsive growth factor nanocapsules for promoting bone repair
Qi, H., Yang, L., Li, X., Sun, X., Zhao, J., Hou, X., Li, Z., Yuan, X., Cui, Z., & Yang, X. (2019) · Biomaterials Science · doi:10.1039/c8bm01632a · Cited by 61
Self-citationNiu, D., Xu, P., Sun, Z., Yang, W., Dong, W., Ji, Y., Liu, T. X., Du, M., Lemstra, P. J., & Ma, P. (2021) · Polymer · doi:10.1016/j.polymer.2021.124269 · Cited by 61
Jiang, W., Shi, J., Li, W., & Sun, K. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23193 · Cited by 60
Sinha, S. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00005-3 · Cited by 59
Diloksumpan, P., Bolaños, R. V., Cokelaere, S. M., Pouran, B., de Grauw, J. C., van Rijen, M. H. P., van Weeren, P. R., Levato, R., & Malda, J. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901807 · Cited by 58
Zhou, W., Dong, X., He, Y., Zheng, W., & Leng, J. (2022) · Smart Materials and Structures · doi:10.1088/1361-665x/ac884a · Cited by 57
Apoptosis in the Extraosseous Calcification Process
Boraldi, F., Lofaro, F. D., & Quaglino, D. (2021) · Cells · doi:10.3390/cells10010131 · Cited by 53
Wu, M., Zhang, Y., Wu, P., Chen, F., Yang, Z., Zhang, S., Xiao, L., Cai, L., Zhang, C., Chen, Y., et al. (2022) · npj Regenerative Medicine · doi:10.1038/s41536-022-00224-9 · Cited by 53
Self-citationZhu, Y., Deng, K., Zhou, J., Lai, C., Ma, Z., Zhang, H., Pan, J., Shen, L., Bucknor, M. D., Ozhinsky, E., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45437-2 · Cited by 53
Yu, Y., Ran, Q., Shen, X., Zheng, H., & Cai, K. (2019) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2019.110592 · Cited by 52
Lauretis, A. D., Øvrebø, Ø., Romandini, M., Lyngstadaas, S. P., Rossi, F., & Haugen, H. J. (2024) · Advanced Science · doi:10.1002/advs.202308848 · Cited by 51
Novel insights into nanomaterials for immunomodulatory bone regeneration
Cui, Y., Li, H., Li, Y., & Mao, L. (2021) · Nanoscale Advances · doi:10.1039/d1na00741f · Cited by 49
Effects of immune cells on mesenchymal stem cells during fracture healing
Ehnert, S., Relja, B., Schmidt‐Bleek, K., Fischer, V., Ignatius, A. A., Linnemann, C., Rinderknecht, H., Huber-Lang, M. S., Kalbitz, M., Histing, T., et al. (2021) · World Journal of Stem Cells · doi:10.4252/wjsc.v13.i11.1667 · Cited by 49
Shankar, D., Jayaganesh, K., Gowda, N., Lakshmi, K. S., Jayanthi, K. J., & Jambagi, S. C. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213791 · Cited by 49
Metallic Implants for Biomedical Applications
Bazaka, O., Bazaka, K., Kingshott, P., Crawford, R. J., & Ivanova, E. P. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781788019828-00001 · Cited by 48
Xu, X., Chen, X., Wang, H., Mei, X., Chen, B., Li, R., & Qin, Y. (2022) · Materials Today Advances · doi:10.1016/j.mtadv.2022.100209 · Cited by 48
Advanced construction strategies to obtain nanocomposite hydrogels for bone repair and regeneration
Ding, W., Ge, Y., Zhang, T., Zhang, C., & Yin, X. (2024) · NPG Asia Materials · doi:10.1038/s41427-024-00533-z · Cited by 45
Magnetic‐Based Strategies for Regenerative Medicine and Tissue Engineering
Santos, L. F., Silva, A. S., & Mano, J. F. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300605 · Cited by 44
Zhang, G., Lu, Y., Song, J., An, M., An, M., Chen, W., Han, P., Yao, X., & Zhang, X. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.08.176 · Cited by 43
Gao, W., Deng, J., Ren, J., Zhang, W., Wang, Z., He, R., Wang, K., Shi, X., & Liang, T. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110315 · Cited by 42
Kim, J., Choi, H., Kim, Y., & Song, S. (2022) · Small · doi:10.1002/smll.202203464 · Cited by 42
He, C., Dong, C., Hu, H., Yu, L., Chen, Y., & Hao, Y. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101297 · Cited by 41
Silva, F. A. L. S., Chang, H., Incorvia, J. A. C., Oliveira, M. J., Sarmento, B. F. C. C., Santos, S. G., Magalhães, F. D., & Pinto, A. M. (2023) · Small · doi:10.1002/smll.202306137 · Cited by 41
Meng, J., Boschetto, F., Yagi, S., Marin, E., Adachi, T., Chen, X.-F., Pezzotti, G., Sakurai, S., Yamane, H., & Xu, H. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110781 · Cited by 38
4D printed biocompatible magnetic nanocomposites toward deployable constructs
Choudhury, S., Joshi, A., Dasgupta, D., Ghosh, A., Asthana, S., & Chatterjee, K. (2024) · Materials Advances · doi:10.1039/d3ma00958k · Cited by 38
4D Printing of Biocompatible Scaffolds via In Situ Photo-crosslinking from Shape Memory Copolyesters
Luo, K., Wang, L., Wang, M.-X., Du, R., Tang, L., Yang, K., & Wang, Y. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10747 · Cited by 37
Cui, N., Jiajia, J., Li, M., Qi, H., Wu, X., & Tingli, L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109746 · Cited by 36
Additive processing of biopolymers for medical applications
Velu, R., Jayashankar, D. K., & Subburaj, K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818411-0.00019-7 · Cited by 36
Li, M., Gao, L., Chen, J., Zhang, Y., Wang, J., Lu, X., Duan, K., Weng, J., & Feng, B. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa9526 · Cited by 32
Salamanna, F., Giavaresi, G., Contartese, D., Bigi, A., Boanini, E., Parrilli, A., Lolli, R., Gasbarrini, A., Bròdano, G. B., & Fini, M. (2019) · Journal of Cellular Physiology · doi:10.1002/jcp.28601 · Cited by 32
Li, J., Lam, A. T., Toh, J. P. W., Reuveny, S., Oh, S., & Birch, W. R. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b00125 · Cited by 31
Zhang, J., Zhang, M., Lin, R., Du, Y., Wang, L., Yao, Q., Zannettino, A. C. W., & Zhang, H. (2022) · Biofabrication · doi:10.1088/1758-5090/ac5935 · Cited by 31
Advances and Prospects in Materials for Craniofacial Bone Reconstruction
Gu, L., Huang, R., Ni, N., Gu, P., & Fan, X. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00399 · Cited by 31
Nasello, G., Vautrin, A., Pitocchi, J., Wesseling, M., Kuiper, J. H., Pérez, M. Á., & García‐Aznar, J. M. (2020) · Bone · doi:10.1016/j.bone.2020.115769 · Cited by 29
Density–property relationships in mineralized collagen–glycosaminoglycan scaffolds
Kanungo, B. P., & Gibson, L. J. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.029 · Cited by 27
Effect of geometry and microstructure of honeycomb TCP scaffolds on bone regeneration
Takabatake, K., Yamachika, E., Tsujigiwa, H., Takeda, Y., Kimura, M., Takagi, S., Nagatsuka, H., & Iida, S. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34966 · Cited by 26
Manssor, N. A. S., Radzi, Z., Yahya, N. A., Yusof, L. M., Hariri, F., Khairuddin, N. H., Kasim, N. H. A., & Czernuszka, J. T. (2016) · Skin Pharmacology and Physiology · doi:10.1159/000431328 · Cited by 26
Xi, Y., Lin, F. H., Li, P., Yan, S., Zhang, K., Cui, W., & Yin, J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137454 · Cited by 26
Wei, S., Hu, Q., Ma, J., DAI, X. H., Sun, Y., Han, G., Meng, H., Xu, W., Zhang, L., Ma, X., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.03.014 · Cited by 25
3D-printed near-infrared-light-responsive on-demand drug-delivery scaffold for bone regeneration
Dong, Q., Zhuqing, W., Li, Q., Yunsong, L., Ping, Z., Xiao, Z., Niu, Y., Liu, H., Yongsheng, Z., & Lv, L. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213804 · Cited by 24
Cai, W., Xu, X., Jiang, Y., Cheng, K., Liu, F., Song, C., Guo, D., Hu, Z., Liu, Z., & Liu, Z. (2023) · Materials Today Advances · doi:10.1016/j.mtadv.2023.100381 · Cited by 23
Chaaban, M., Moya, A., García‐García, A., Paillaud, R., Schaller, R., Klein, T., Power, L., Buczak, K., Schmidt, A., Kappos, E. A., et al. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122387 · Cited by 23
Chatterjee, O., & Sur, D. (2023) · European Journal of Pharmacology · doi:10.1016/j.ejphar.2023.176006 · Cited by 22
Witt, C., Kaiser, T., & Menzel, A. (2023) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2022.105194 · Cited by 18
Mandal, S., Kishore, A. V., Mandal, S., Bhar, B., Mandal, B. B., Nandi, S. K., & Roy, M. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.07.004 · Cited by 18
Huang, L., Du, M., Sun, D., He, M., Liu, Z., Wu, R., Jiang, Y., Qi, L., Wang, J., Zhu, C., et al. (2023) · Small · doi:10.1002/smll.202306508 · Cited by 18
Yang, W., Li, L., Chen, M., Peng, S., Aiyiti, W., & Shuai, C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c01583 · Cited by 17
Hsieh, H., Chen, C.-L., Chan, H.-W., Chi, K., & Wu, C.-Y. (2023) · British Journal of Cancer · doi:10.1038/s41416-023-02537-y · Cited by 17
Polymer/calcium phosphate biocomposites manufactured by selective laser sintering: an overview
Schappo, H., Giry, K., Salmoria, G. V., Damia, C., & Hotza, D. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00332-4 · Cited by 13
Development of a Smart Scaffold for Sequential Cancer Chemotherapy and Tissue Engineering
Sengupta, P., Agrawal, V., & Prasad, B. L. V. (2020) · ACS Omega · doi:10.1021/acsomega.9b03694 · Cited by 12
Fe-doped mesoporous silica catalyzes ascorbic acid oxidation for tumor-specific therapy in scaffold
Shuai, C., Chen, X., He, C., Chen, M., Peng, S., & Yang, W. (2023) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2023.113251 · Cited by 10
Mahmoudi, N., Roque, M., dos Santos, B. P., Oliveira, H., Siadous, R., Rey, S., Garanger, É., Lecommandoux, S., Catros, S., Garbay, B., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303765 · Cited by 9
Zamarioli, A., Butezloff, M. M., Ximenez, J. P. B., & Volpon, J. B. (2022) · Spinal Cord · doi:10.1038/s41393-022-00863-1 · Cited by 8
Mulchandani, N., Masutani, K., Kumar, S., Sakurai, S., Kimura, Y., & Katiyar, V. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104040 · Cited by 7
Multi-responsive Materials: Properties, Design, and Applications
Bigham, A., & Raucci, M. G. (2023) · ACS symposium series · doi:10.1021/bk-2023-1436.ch011 · Cited by 5
Introduction to vat polymerization 3D printing technologies
Yang, W., Zhang, M., Peng, S., Pan, R., & Liu, Y. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15487-4.00010-8 · Cited by 4
Vinson, B. T. (2018) · CRC Press eBooks · doi:10.1201/b21916-4 · Cited by 3
Gusti, A. W. R., Mahyudin, F., Widiyanti, P., & Utomo, D. N. (2023) · Journal of the Australian Ceramic Society · doi:10.1007/s41779-023-00939-y · Cited by 3
Cited by
Si, Y., Li, X., Dong, S., Gao, X., Zhu, Y., Mo, L., Wang, Z., Wang, S., & Zhang, C. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.08.026 · Cited by 17
“The rapid advancement of bone tissue engineering (BTE) has significantly promoted the development of artificial bone grafting materials [6,7].”
Multimodal mechanoregulation strategies towards tissue regeneration
Yu, Q., Duan, Y., Zhu, Z., Ji, W., Zhu, C., & Li, B. (2025) · Mechanobiology in Medicine · doi:10.1016/j.mbm.2025.100159 · Cited by 8
Metadata
- Authors
- Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2024-06-28
- Volume
- 36
- Issue
- 34
- Pages
- e2403641-e2403641
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4399519315
- Cited by
- 339
- References
- 299
- FWCI
- 35.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.