The DOI matches its Crossref record; 299 of the 299 references it cites were found in a registry or an index.
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Abstract
The repair and functional reconstruction of bone defects resulting from severe trauma, surgical resection, degenerative disease, and congenital malformation pose significant clinical challenges. Bone tissue engineering (BTE) holds immense potential in treating these severe bone defects, without incurring prevalent complications associated with conventional autologous or allogeneic bone grafts. 3D printing technology enables control over architectural structures at multiple length scales and has been extensively employed to process biomimetic scaffolds for BTE. In contrast to inert and functional bone grafts, next‐generation smart scaffolds possess a remarkable ability to mimic the dynamic nature of native extracellular matrix (ECM), thereby facilitating bone repair and regeneration. Additionally, they can generate tailored and controllable therapeutic effects, such as antibacterial or antitumor properties, in response to exogenous and/or endogenous stimuli. This review provides a comprehensive assessment of the progress of 3D‐printed smart scaffolds for BTE applications. It begins with an introduction to bone physiology, followed by an overview of 3D printing technologies utilized for smart scaffolds. Notable advances in various stimuli‐responsive strategies, therapeutic efficacy, and applications of 3D‐printed smart scaffolds are discussed. Finally, the review highlights the existing challenges in the development and clinical implementation of smart scaffolds, as well as emerging technologies in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Functional Hydrogels as Wound Dressing to Enhance Wound Healing
Liang, Y., He, J., & Guo, B. (2021) · ACS Nano · doi:10.1021/acsnano.1c04206 · Cited by 3,135
Concepts of extracellular matrix remodelling in tumour progression and metastasis
Winkler, J., Abisoye-Ogunniyan, A., Metcalf, K. J., & Werb, Z. (2020) · Nature Communications · doi:10.1038/s41467-020-18794-x · Cited by 2,296
Suchanek, W., & Yoshimura, M. (1998) · Journal of Materials Research · doi:10.1557/jmr.1998.0015 · Cited by 2,028
Osteoinduction, osteoconduction and osseointegration
T., A., & C., J. (2001) · European Spine Journal · doi:10.1007/s005860100282 · Cited by 1,751
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
The role of apoptosis in response to photodynamic therapy: what, where, why, and how
Oleinick, N. L., Morris, R. L., & Belichenko, I. (2002) · Photochemical & Photobiological Sciences · doi:10.1039/b108586g · Cited by 1,503
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Li, Y., Xiao, K., Huang, C., Wang, J., Gao, M., Hu, A., Tang, Q., Fan, B., Xu, Y., & Chen, X. (2021) · Nano-Micro Letters · doi:10.1007/s40820-020-00525-y · Cited by 892
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Porous scaffolds for bone regeneration
Abbasi, N., Hamlet, S., Love, R. M., & Nguyen, N.-T. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.007 · Cited by 858
Extracellular matrix-based materials for regenerative medicine
Hussey, G. S., Dziki, J. L., & Badylak, S. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0023-x · Cited by 844
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Graphene-based smart materials
Yu, X., Cheng, H., Zhang, M., Zhao, Y., Qu, L., & Shi, G. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.46 · Cited by 796
Spiller, K. L., Nassiri, S., Witherel, C. E., Anfang, R. R., Ng, J., Nakazawa, K. R., Yu, T., & Vunjak-Novakovic, G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.10.017 · Cited by 773
Osteoimmunology: evolving concepts in bone–immune interactions in health and disease
Tsukasaki, M., & Takayanagi, H. (2019) · Nature Reviews Immunology · doi:10.1038/s41577-019-0178-8 · Cited by 771
Bone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Fractal-like hierarchical organization of bone begins at the nanoscale
Reznikov, N., Bilton, M., Lari, L., Stevens, M. M., & Kröger, R. (2018) · Science · doi:10.1126/science.aao2189 · Cited by 661
Macrophages in health and disease
Park, M. D., Silvin, A., Ginhoux, F., & Merad, M. (2022) · Cell · doi:10.1016/j.cell.2022.10.007 · Cited by 644
Chitosan based bioactive materials in tissue engineering applications-A review
Islam, M. M., Shahruzzaman, M., Biswas, S., Nurus Sakib, M., & Rashid, T. U. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.012 · Cited by 611
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Circulating and disseminated tumour cells — mechanisms of immune surveillance and escape
Mohme, M., Riethdorf, S., & Pantel, K. (2017) · Nature Reviews Clinical Oncology · doi:10.1038/nrclinonc.2016.144 · Cited by 602
Recent Advances in Nanomaterial‐Assisted Combinational Sonodynamic Cancer Therapy
Liang, S., Deng, X., Ma, P., Cheng, Z., & Lin, J. (2020) · Advanced Materials · doi:10.1002/adma.202003214 · Cited by 598
Huang, L., Li, Y., Du, Y., Zhang, Y., Wang, X., Ding, Y., Yang, X., Meng, F., Tu, J., Luo, L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12771-9 · Cited by 596
Overview of advancement and development trend on magnesium alloy
Xu, T., Yang, Y., Peng, X., Song, J., & Pan, F. (2019) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2019.08.001 · Cited by 586
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., De Coppi, P., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 563
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Piezoelectric Nano‐Biomaterials for Biomedicine and Tissue Regeneration
Kapat, K., Shubhra, Q. T. H., Zhou, M., & Leeuwenburgh, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909045 · Cited by 541
Robling, A. G., & Bonewald, L. F. (2020) · Annual Review of Physiology · doi:10.1146/annurev-physiol-021119-034332 · Cited by 539
Thermosensitive sol–gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.012 · Cited by 533
Review of bone graft and bone substitutes with an emphasis on fracture surgeries
Sohn, H.-S., & Oh, J.-K. (2019) · Biomaterials Research · doi:10.1186/s40824-019-0157-y · Cited by 526
Gavilán, H., Avugadda, S. K., Fernández-Cabada, T., Soni, N., Cassani, M., Mai, B. T., Chantrell, R., & Pellegrino, T. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00427a · Cited by 525
3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy.
Ma, H., Feng, C., Chang, J., & Wu, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.08.026 · Cited by 512
Morrison, R. J., Hollister, S. J., Niedner, M. F., Mahani, M. G., Park, A. H., Mehta, D. K., Ohye, R. G., & Green, G. E. (2015) · Science Translational Medicine · doi:10.1126/scitranslmed.3010825 · Cited by 498
Zhu, G., Zhang, T., Chen, M., Yao, K., Huang, X., Zhang, B., Li, Y., Liu, J., Wang, Y., & Zhao, Z. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.043 · Cited by 494
Radio-Wave Heating of Iron Oxide Nanoparticles Can Regulate Plasma Glucose in Mice
Stanley, S. A., Gagner, J. E., Damanpour, S., Yoshida, M., Dordick, J. S., & Friedman, J. M. (2012) · Science · doi:10.1126/science.1216753 · Cited by 490
Bone remodeling: an operational process ensuring survival and bone mechanical competence
Bolamperti, S., Villa, I., & Rubinacci, A. (2022) · Bone Research · doi:10.1038/s41413-022-00219-8 · Cited by 482
Liu, Z., Wan, X., Wang, Z. L., & Li, L. (2021) · Advanced Materials · doi:10.1002/adma.202007429 · Cited by 478
Recent advances in smart stimuli-responsive biomaterials for bone therapeutics and regeneration
Wei, H., Cui, J., Lin, K., Xie, J., & Wang, X. (2022) · Bone Research · doi:10.1038/s41413-021-00180-y · Cited by 471
Improving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Review of light parameters and photobiomodulation efficacy: dive into complexity
Zein, R., Selting, W., & Hamblin, M. R. (2018) · Journal of Biomedical Optics · doi:10.1117/1.jbo.23.12.120901 · Cited by 461
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Li, W., Liu, Y., Zhang, P., Tang, Y., Zhou, M., Jiang, W., Zhang, X., Wu, G., & Zhou, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17620 · Cited by 455
Piezoelectric smart biomaterials for bone and cartilage tissue engineering
Jacob, J., More, N., Kalia, K., & Kapusetti, G. (2018) · Inflammation and Regeneration · doi:10.1186/s41232-018-0059-8 · Cited by 454
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Enzymatic degradation of plant biomass and synthetic polymers
Chen, C.-C., Dai, L., Ma, L., & Guo, R.-T. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-020-0163-6 · Cited by 421
Schlundt, C., Fischer, H., Bucher, C. H., Rendenbach, C., Duda, G. N., & Schmidt-Bleek, K. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.04.052 · Cited by 415
Flexible shape-memory scaffold for minimally invasive delivery of functional tissues
Montgomery, M., Ahadian, S., Davenport Huyer, L., Lo Rito, M., Civitarese, R. A., Vanderlaan, R. D., Wu, J., Reis, L. A., Momen, A., Akbari, S., et al. (2017) · Nature Materials · doi:10.1038/nmat4956 · Cited by 409
Shuai, C., Liu, G., Yang, Y., Qi, F., Peng, S., Yang, W., He, C., Wang, G., & Qian, G. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104825 · Cited by 406
Gunaydin, G., Gedik, M. E., & Ayan, S. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.686303 · Cited by 402
Jakus, A. E., Rutz, A. L., Jordan, S. W., Kannan, A., Mitchell, S. M., Yun, C., Koube, K. D., Yoo, S. C., Whiteley, H. E., Richter, C.-P., et al. (2016) · Science Translational Medicine · doi:10.1126/scitranslmed.aaf7704 · Cited by 396
Brennan, M. Á., Layrolle, P., & Mooney, D. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909125 · Cited by 396
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Metwally, S., & Stachewicz, U. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109883 · Cited by 382
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Zhou, H., Liang, B., Jiang, H., Deng, Z., & Yu, K. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.03.004 · Cited by 377
Scaffolds for bone-tissue engineering
Lee, S. S., Du, X., Kim, I., & Ferguson, S. J. (2022) · Matter · doi:10.1016/j.matt.2022.06.003 · Cited by 375
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2
Cao, F., Shi, Z., Hofstetter, J., Uggowitzer, P. J., Song, G., Liu, M., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.05.018 · Cited by 371
3D printing: Principles and pharmaceutical applications of selective laser sintering
Awad, A., Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119594 · Cited by 371
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Rezaei, B., Yari, P., Sanders, S. M., Wang, H., Chugh, V. K., Liang, S., Mostufa, S., Xu, K., Wang, J., Gómez‐Pastora, J., et al. (2024) · Small · doi:10.1002/smll.202304848 · Cited by 366
Bone Tissue Engineering Scaffolds: Function of Multi‐Material Hierarchically Structured Scaffolds
Koushik, T. M., Miller, C. M., & Antunes, E. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202202766 · Cited by 359
Osteoimmunity‐Regulating Biomimetically Hierarchical Scaffold for Augmented Bone Regeneration
Zhang, J., Tong, D., Song, H., Ruan, R., Sun, Y., Lin, Y., Wang, J., Hou, L., Dai, J., Ding, J., et al. (2022) · Advanced Materials · doi:10.1002/adma.202202044 · Cited by 349
Ryan, K. R., Down, M. P., & Banks, C. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126162 · Cited by 338
Exercise-induced piezoelectric stimulation for cartilage regeneration in rabbits
Liu, Y., Dzidotor, G., Le, T. T., Vinikoor, T., Morgan, K., Curry, E. J., Das, R., McClinton, A., Eisenberg, E., Apuzzo, L. N., et al. (2022) · Science Translational Medicine · doi:10.1126/scitranslmed.abi7282 · Cited by 338
Zhao, Z., Li, G., Ruan, H., Chen, K., Cai, Z., Lu, G., Li, R., Deng, L., Cai, M., & Cui, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c02147 · Cited by 333
Articular cartilage: from formation to tissue engineering
Camarero-Espinosa, S., Rothen-Rutishauser, B., Foster, E. J., & Weder, C. (2016) · Biomaterials Science · doi:10.1039/c6bm00068a · Cited by 328
pH ‐responsive polymers for drug delivery: Trends and opportunities
Singh, J., & Nayak, P. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230403 · Cited by 327
3D printed electronics: Processes, materials and future trends
Tan, H. W., Choong, Y. Y. C., Kuo, C. N., Low, H. Y., & Chua, C. K. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100945 · Cited by 327
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Bioinspired surface modification of orthopedic implants for bone tissue engineering
Hu, C., Ashok, D., Nisbet, D. R., & Gautam, V. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119366 · Cited by 324
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Diabetes mellitus related bone metabolism and periodontal disease
Wu, Y.-Y., Xiao, E., & Graves, D. T. (2015) · International Journal of Oral Science · doi:10.1038/ijos.2015.2 · Cited by 310
Near-infrared light control of bone regeneration with biodegradable photothermal osteoimplant
Tong, L., Liao, Q., Zhao, Y., Huang, H., Gao, A., Zhang, W., Gao, X., Wei, W., Guan, M., Chu, P. K., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.008 · Cited by 302
Macroscale delivery systems for molecular and cellular payloads
Kearney, C. J., & Mooney, D. J. (2013) · Nature Materials · doi:10.1038/nmat3758 · Cited by 301
On the road to smart biomaterials for bone research: definitions, concepts, advances, and outlook
Montoya, C., Du, Y., Gianforcaro, A. L., Orrego, S., Yang, M., & Lelkes, P. I. (2021) · Bone Research · doi:10.1038/s41413-020-00131-z · Cited by 298
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Chemical syntheses of bioinspired and biomimetic polymers toward biobased materials
Ganewatta, M. S., Wang, Z., & Tang, C. (2021) · Nature Reviews Chemistry · doi:10.1038/s41570-021-00325-x · Cited by 290
Photodynamic therapy: Innovative approaches for antibacterial and anticancer treatments
Kolarikova, M., Hosikova, B., Dilenko, H., Barton‐Tomankova, K., Valkova, L., Bajgar, R., Malina, L., & Kolarova, H. (2023) · Medicinal Research Reviews · doi:10.1002/med.21935 · Cited by 282
Additive manufacturing of magnesium alloys
Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F., & Sealy, M. P. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.004 · Cited by 278
Recent Advances of Chitosan Formulations in Biomedical Applications
Abourehab, M. A. S., Pramanik, S., Abdelgawad, M. A., Abualsoud, B. M., Kadi, A., Ansari, M. J., & Deepak, A. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231810975 · Cited by 277
Tedford, C. E., DeLapp, S., Jacques, S., & Anders, J. (2015) · Lasers in Surgery and Medicine · doi:10.1002/lsm.22343 · Cited by 271
Tissue repair and regeneration with endogenous stem cells
Xia, H., Li, X., Gao, W., Fu, X., Fang, R. H., Zhang, L., & Zhang, K. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0027-6 · Cited by 268
Magnetic programming of 4D printed shape memory composite structures
Zhang, F., Wang, L., Zheng, Z., Liu, Y., & Leng, J. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105571 · Cited by 267
Next-generation tissue-engineered heart valves with repair, remodelling and regeneration capacity
Fioretta, E. S., Motta, S. E., Lintas, V., Loerakker, S., Parker, K. K., Baaijens, F. P. T., Falk, V., Hoerstrup, S. P., & Emmert, M. Y. (2021) · Nature Reviews Cardiology · doi:10.1038/s41569-020-0422-8 · Cited by 262
Harnessing Endogenous Stimuli for Responsive Materials in Theranostics
Cook, A. B., & Decuzzi, P. (2021) · ACS Nano · doi:10.1021/acsnano.0c09115 · Cited by 262
An, D., Fu, J., Zhang, B., Xie, N., Nie, G., Ågren, H., Qiu, M., & Zhang, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101625 · Cited by 261
The osteocyte as a signaling cell
Delgado-Calle, J., & Bellido, T. (2022) · Physiological Reviews · doi:10.1152/physrev.00043.2020 · Cited by 261
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Närhi, T., & Seppälä, J. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32863 · Cited by 258
The endothelium–bone axis in development, homeostasis and bone and joint disease
Tuckermann, J., & Adams, R. H. (2021) · Nature Reviews Rheumatology · doi:10.1038/s41584-021-00682-3 · Cited by 258
Bone tissue engineering techniques, advances, and scaffolds for treatment of bone defects
Alonzo, M., Alvarez Primo, F., Anil Kumar, S., Mudloff, J. A., Dominguez, E., Fregoso, G., Ortiz, N., Weiss, W. M., & Joddar, B. (2021) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2020.100248 · Cited by 255
Bittner, S. M., Smith, B. T., Diaz-Gomez, L., Hudgins, C. D., Melchiorri, A. J., Scott, D. W., Fisher, J. P., & Mikos, A. G. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.03.041 · Cited by 245
Advancing Frontiers in Bone Bioprinting
Ashammakhi, N., Hasan, A., Kaarela, O., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 244
Structural and Functional Adaptive Artificial Bone: Materials, Fabrications, and Properties
Feng, P., Zhao, R., Tang, W., Yang, F., Tian, H., Peng, S., Pan, H., & Shuai, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214726 · Cited by 244
Biomimetic delivery of signals for bone tissue engineering
Dang, M., Saunders, L., Niu, X., Fan, Y., & Ma, P. X. (2018) · Bone Research · doi:10.1038/s41413-018-0025-8 · Cited by 240
Additive Manufacturing of Precision Biomaterials
Guzzi, E. A., & Tibbitt, M. W. (2020) · Advanced Materials · doi:10.1002/adma.201901994 · Cited by 234
Mechanical aspects of dental implants and osseointegration: A narrative review
Li, J., Jansen, J. A., Walboomers, X. F., & van den Beucken, J. J. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.103574 · Cited by 232
A review of bioceramic porous scaffolds for hard tissue applications: Effects of structural features
Jodati, H., Yılmaz, B., & Evis, Z. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.03.192 · Cited by 232
Chen, P., Xu, C., Wu, P., Liu, K., Chen, F., Chen, Y., Dai, H., & Luo, Z. (2022) · ACS Nano · doi:10.1021/acsnano.2c05818 · Cited by 228
Self-citationFused deposition modeling of thermoplastic elastomeric materials: Challenges and opportunities
Awasthi, P., & Banerjee, S. S. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102177 · Cited by 222
Wang, T., Bai, J., Lu, M., Huang, C., Geng, D., Chen, G., Wang, L., Qi, J., Cui, W., & Deng, L. (2022) · Nature Communications · doi:10.1038/s41467-021-27816-1 · Cited by 221
Tian, B., Liu, S., Feng, L., Liu, S., Gai, S., Dai, Y., Xie, L., Liu, B., Yang, P., & Zhao, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100549 · Cited by 219
Responsive biomaterials: optimizing control of cancer immunotherapy
Xue, L., Thatte, A. S., Mai, D., Haley, R. M., Gong, N., Han, X., Wang, K., Sheppard, N. C., June, C. H., & Mitchell, M. J. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00617-2 · Cited by 212
Self-citationBiomechanics and mechanobiology of the bone matrix
Ma, C., Du, T., Niu, X., & Fan, Y. (2022) · Bone Research · doi:10.1038/s41413-022-00223-y · Cited by 211
Ma, L., Feng, X., Liang, H., Wang, K., Song, Y., Tan, L., Wang, B., Luo, R., Liao, Z., Li, G., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.005 · Cited by 210
Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine
Prendergast, M. E., & Burdick, J. A. (2020) · Advanced Materials · doi:10.1002/adma.201902516 · Cited by 209
Antimicrobial Photodynamic Therapy: Latest Developments with a Focus on Combinatory Strategies
Youf, R., Müller, M., Balasini, A., Thétiot, F., Müller, M., Hascoët, A., Jonas, U., Schönherr, H., Lemercier, G., Montier, T., et al. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13121995 · Cited by 207
Borciani, G., Montalbano, G., Baldini, N., Cerqueni, G., Vitale-Brovarone, C., & Ciapetti, G. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.03.043 · Cited by 205
Emerging 4D Printing Strategies for Next‐Generation Tissue Regeneration and Medical Devices
Wang, Y., Cui, H., Esworthy, T., Mei, D., Wang, Y., & Zhang, L. G. (2022) · Advanced Materials · doi:10.1002/adma.202109198 · Cited by 205
Stimuli‐Responsive Biomaterials: Scaffolds for Stem Cell Control
Gelmi, A., & Schutt, C. E. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202001125 · Cited by 204
Bone Repair Biomaterials: A Perspective from Immunomodulation
Wang, Y., Zhang, H., Hu, Y., Jing, Y., Geng, Z., & Su, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202208639 · Cited by 203
Metwally, S., Ferraris, S., Spriano, S., Krysiak, Z. J., Kaniuk, Ł., Marzec, M. M., Kim, S. K., Szewczyk, P. K., Gruszczyński, A., Wytrwal-Sarna, M., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108915 · Cited by 194
Ceramic biomaterials: Properties, state of the art and future prospectives
Punj, S., Singh, J., & Singh, K. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.06.238 · Cited by 193
Ha, Y., Ma, X., Li, S., Li, T., Li, Z., Qian, Y., Shafiq, M., Wang, J., Zhou, X., & He, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200011 · Cited by 191
Fracture Healing in the Setting of Endocrine Diseases, Aging, and Cellular Senescence
Saul, D., & Khosla, S. (2022) · Endocrine Reviews · doi:10.1210/endrev/bnac008 · Cited by 185
A bifunctional scaffold with CuFeSe2 nanocrystals for tumor therapy and bone reconstruction
Dang, W., Li, T., Li, B., Ma, H., Zhai, D., Wang, X., Chang, J., Xiao, Y., Wang, J., & Wu, C. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.020 · Cited by 182
Das, R., Curry, E. J., Le, T. T., Awale, G., Liu, Y., Li, S., Contreras, J., Bednarz, C., Millender, J., Xin, X., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105028 · Cited by 182
Bioceramic-based scaffolds with antibacterial function for bone tissue engineering: A review
Zhao, C., Liu, W., Zhu, M., Wu, C., & Zhu, Y. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.02.010 · Cited by 181
Stimuli-responsive dynamic hydrogels: design, properties and tissue engineering applications
Amirthalingam, S., Rajendran, A. K., Moon, Y. G., & Hwang, N. S. (2023) · Materials Horizons · doi:10.1039/d3mh00399j · Cited by 181
Functionalized BaTiO3 enhances piezoelectric effect towards cell response of bone scaffold
Shuai, C., Liu, G., Yang, Y., Yang, W., He, C., Wang, G., Liu, Z., Qi, F., & Peng, S. (2020) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2019.110587 · Cited by 179
Dong, S., Chen, Y., Yu, L., Lin, K., & Wang, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907071 · Cited by 179
Liu, X., Zhao, K., Gong, T., Song, J., Bao, C., Luo, E., Weng, J., & Zhou, S. (2014) · Biomacromolecules · doi:10.1021/bm401911p · Cited by 178
Swanson, W. B., Zhang, Z., Xiu, K., Gong, T., Eberle, M., Wang, Z., & Ma, P. X. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.09.052 · Cited by 177
Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold
Yang, Y., Cheng, Y., Peng, S., Xu, L., He, C., Qi, F., Zhao, M., & Shuai, C. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.017 · Cited by 177
Sun, Q., Wang, Z., Liu, B., He, F., Gai, S., Yang, P., Yang, D., Li, C., & Lin, J. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214267 · Cited by 176
Breaking the resolution limits of 3D bioprinting: future opportunities and present challenges
Zandrini, T., Florczak, S., Levato, R., & Ovsianikov, A. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.10.009 · Cited by 174
3D bioprinting of skin tissue: From pre-processing to final product evaluation
Yan, W.-C., Davoodi, P., Vijayavenkataraman, S., Tian, Y., Ng, W. C., Fuh, J. Y. H., Robinson, K. S., & Wang, C.-H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.016 · Cited by 171
Common biocompatible polymeric materials for tissue engineering and regenerative medicine
Asadi, N., Del Bakhshayesh, A. R., Davaran, S., & Akbarzadeh, A. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122528 · Cited by 171
Bone Vasculature and Bone Marrow Vascular Niches in Health and Disease
Chen, J., Hendriks, M., Chatzis, A., Ramasamy, S. K., & Kusumbe, A. P. (2020) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.4171 · Cited by 168
Madry, H., Gao, L., Rey‐Rico, A., Venkatesan, J. K., Müller‐Brandt, K., Cai, X., Goebel, L., Schmitt, G., Speicher‐Mentges, S., Zurakowski, D., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906508 · Cited by 167
Zhang, X., Li, Q., Li, L., Ouyang, J., Wang, T., Chen, J., Hu, X., Ao, Y., Qin, D., Zhang, L., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c11486 · Cited by 167
Bioinspired Three-Dimensional Magnetoactive Scaffolds for Bone Tissue Engineering
Fernandes, M. M., Correia, D. M., Ribeiro, C., Castro, N., Correia, V., & Lanceros-Mendez, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14001 · Cited by 166
Polyetheretherketone and Its Composites for Bone Replacement and Regeneration
Liao, C., Li, Y., & Tjong, S. C. (2020) · Polymers · doi:10.3390/polym12122858 · Cited by 162
Current and emerging trends in polymeric 3D printed microfluidic devices
Gonzalez, G., Roppolo, I., Pirri, C. F., & Chiappone, A. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102867 · Cited by 160
Park, H., He, H., Yan, X., Liu, X., Scrutton, N. S., & Chen, G.-Q. (2024) · Biotechnology Advances · doi:10.1016/j.biotechadv.2024.108320 · Cited by 160
Cellular rejuvenation: molecular mechanisms and potential therapeutic interventions for diseases
Ji, S., Xiong, M., Chen, H., Liu, Y., Zhou, L., Hong, Y., Wang, M., Wang, C., Fu, X., & Sun, X. (2023) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-023-01343-5 · Cited by 159
Synthetic and Bone tissue engineering graft substitutes: What is the future?
Valtanen, R. S., Yang, Y. P., Gurtner, G. C., Maloney, W. J., & Lowenberg, D. W. (2021) · Injury · doi:10.1016/j.injury.2020.07.040 · Cited by 158
3D plotting of growth factor loaded calcium phosphate cement scaffolds
Akkineni, A. R., Luo, Y., Schumacher, M., Nies, B. A., Lode, A., & Gelinsky, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.036 · Cited by 156
Cartilage calcification in osteoarthritis: mechanisms and clinical relevance
Bernabei, I., So, A. K.-L., Busso, N., & Nasi, S. (2022) · Nature Reviews Rheumatology · doi:10.1038/s41584-022-00875-4 · Cited by 155
Characterizing the ecological and evolutionary dynamics of cancer
Zahir, N., Sun, R., Gallahan, D., Gatenby, R. A., & Curtis, C. N. (2020) · Nature Genetics · doi:10.1038/s41588-020-0668-4 · Cited by 153
Magnesium-based biodegradable alloys: Degradation, application, and alloying elements
Pogorielov, M., Husak, E., Solodivnik, A., & Zhdanov, S. (2017) · Interventional Medicine and Applied Science · doi:10.1556/1646.9.2017.1.04 · Cited by 150
Ganguly, S., & Margel, S. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101574 · Cited by 150
Zeng, J., Gu, C., Geng, X., Lin, K., Xie, Y., & Chen, X. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122122 · Cited by 149
Lowther, M., Louth, S., Davey, A. V., Hussain, A., Ginestra, P. S., Carter, L., Eisenstein, N., Grover, L. M., & Cox, S. C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.033 · Cited by 147
Neuro–bone tissue engineering: emerging mechanisms, potential strategies, and current challenges
Sun, W., Ye, B., Chen, S., Zeng, L., Lu, H., Wan, Y., Gao, Q. H., Chen, K., Qu, Y., Wu, B., et al. (2023) · Bone Research · doi:10.1038/s41413-023-00302-8 · Cited by 145
Magnetostrictive alloys: Promising materials for biomedical applications
Gao, C., Zeng, Z., Peng, S., & Shuai, C. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.025 · Cited by 144
Zhang, F., Lv, M., Wang, S., Li, M., Wang, Y., Hu, C., Hu, W., Wang, X., Wang, X., Liu, Z., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.08.008 · Cited by 143
Self-promoted electroactive biomimetic mineralized scaffolds for bacteria-infected bone regeneration
Li, Z., He, D., Guo, B., Wang, Z., Yu, H., Wang, Y., Jin, S., Yu, M., Zhu, L., Chen, L., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-42598-4 · Cited by 143
Tian, M., Chen, G., Xu, J., Lin, Y., Zeng, Y., Chen, X., Li, X., & Chen, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132197 · Cited by 142
The status, barriers, challenges, and future in design for 4D printing
Demoly, F., Dunn, M. L., Wood, K. L., Qi, H. J., & André, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110193 · Cited by 141
Weak magnetic fields alter stem cell–mediated growth
Huizen, A. V. V., Morton, J. M., Kinsey, L. J., Kannon, D. G. V., Saad, M. A., Birkholz, T. R., Czajka, J. M., Cyrus, J., Barnes, F. S., & Beane, W. S. (2019) · Science Advances · doi:10.1126/sciadv.aau7201 · Cited by 139
A transistor-like pH-sensitive nanodetergent for selective cancer therapy
Liu, M., Huang, L., Zhang, W., Wang, X., Geng, Y., Zhang, Y., Wang, L., Zhang, W., Zhang, Y., Xiao, S., et al. (2022) · Nature Nanotechnology · doi:10.1038/s41565-022-01085-5 · Cited by 138
Tailoring surface nanoroughness of electrospun scaffolds for skeletal tissue engineering
Chen, H., Huang, X., Zhang, M., Damanik, F., Baker, M. B., Leferink, A., Yuan, H., Truckenmüller, R. K., van Blitterswijk, C., & Moroni, L. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.003 · Cited by 137
Zhu, Y., Yu, X., Liu, H., Li, J., Gholipourmalekabadi, M., Lin, K., Yuan, C., & Wang, P. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.04.032 · Cited by 136
Combined additive manufacturing approaches in tissue engineering
Giannitelli, S. M., Mozetic, P., Trombetta, M., & Rainer, A. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.032 · Cited by 135
Liu, W., Li, X., Jiao, Y., Wu, C., Guo, S., Xiao, X., Wei, X., Wu, J., Gao, P., Wang, N., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10957 · Cited by 134
Gomes, M. E., Bossano, C. M., Johnston, C. M., Reis, R. L., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.177 · Cited by 132
Advances in Translational 3D Printing for Cartilage, Bone, and Osteochondral Tissue Engineering
Wang, S., Zhao, S., Yu, J., Gu, Z., & Zhang, Y. (2022) · Small · doi:10.1002/smll.202201869 · Cited by 131
Chen, X., Li, Y., Li, S., Gao, M., Ren, L., & Tang, B. Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804362 · Cited by 123
Tomographic volumetric bioprinting of heterocellular bone-like tissues in seconds
Gehlen, J., Qiu, W., Schädli, G. N., Müller, R., & Qin, X. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.06.020 · Cited by 123
Wang, C., Yue, H., Liu, J., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/abab5b · Cited by 122
Hydrogel-in-hydrogel live bioprinting for guidance and control of organoids and organotypic cultures
Urciuolo, A., Giobbe, G. G., Dong, Y., Michielin, F., Brandolino, L., Magnussen, M., Gagliano, O., Selmin, G., Scattolini, V., Raffa, P., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-37953-4 · Cited by 121
Pan, J., Zhou, L., Zhang, C., Xu, Q., & Sun, Y. (2022) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-022-01038-3 · Cited by 121
Magnesium alloys for orthopedic applications:A review on the mechanisms driving bone healing
Wang, N., Yang, S., Shi, H., Song, Y., Sun, H. L., Wang, Q., Tan, L., & Guo, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.11.014 · Cited by 121
Long, J., Zhang, W., Chen, Y., Teng, B., Liu, B., Li, H., Yao, Z., Wang, D., Li, L., Yu, X., et al. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.120950 · Cited by 120
Gregory, G. L., Sulley, G. S., Carrodeguas, L. P., Chen, T. T. D., Santmartí, A., Terrill, N. J., Lee, K., & Williams, C. K. (2020) · Chemical Science · doi:10.1039/d0sc00463d · Cited by 119
Wang, L., Hu, P., Jiang, H., Zhao, J., Tang, J. L., Jiang, D., Wang, J., Shi, J., & Jia, W. (2022) · Nano Today · doi:10.1016/j.nantod.2022.101401 · Cited by 119
Bench-to-bedside strategies for osteoporotic fracture: From osteoimmunology to mechanosensation
Xie, Y., Zhang, L., Xiong, Q., Gao, Y., Ge, W., & Tang, P. (2019) · Bone Research · doi:10.1038/s41413-019-0066-7 · Cited by 118
Biomedical rare-earth magnesium alloy: Current status and future prospects
Yang, M., Chen, C., Wang, D., Shao, Y., Zhou, W., Shuai, C., Yang, Y., & Ning, X. (2024) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2024.03.014 · Cited by 118
Smart Biomaterials for Articular Cartilage Repair and Regeneration
Gu, Z., Wang, J., Fu, Y., Pan, H., He, H., Gan, Q., & Liu, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202212561 · Cited by 117
Smart/stimuli-responsive hydrogels: State-of-the-art platforms for bone tissue engineering
El‐Husseiny, H. M., Mady, E. A., El‐Dakroury, W. A., Zewail, M. B., Noshy, M., Abdelfatah, A. M., & Doghish, A. S. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101560 · Cited by 116
Abbasi, N., Abdal‐hay, A., Hamlet, S. M., Graham, E. Y., & Ivanovski, S. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01456 · Cited by 113
Touchaei, A. Z., & Vahidi, S. (2024) · Cancer Cell International · doi:10.1186/s12935-024-03293-6 · Cited by 110
Photocrosslinkable nanocomposite ink for printing strong, biodegradable and bioactive bone graft
Yang, Y., Zhang, Q., Xu, T., Zhang, H., Zhang, M., Lü, L., Hao, Y., Fuh, J. Y. H., & Zhao, X. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120378 · Cited by 109
Zhang, Y., Li, C., Zhang, W., Deng, J., Nie, Y., Du, X., Qin, L., & Lai, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.12.032 · Cited by 109
Injectable hydrogels for cartilage and bone tissue regeneration: A review
Ghandforoushan, P., Alehosseini, M., Golafshan, N., Castilho, M. D., Dolatshahi‐Pirouz, A., Hanaee, J., Davaran, S., & Orive, G. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125674 · Cited by 108
Ren, Z., Wang, Y., Ma, S., Duan, S., Yang, X., Gao, P., Zhang, X., & Cai, Q. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02821 · Cited by 107
Xiang, H., Yang, Q., Gao, Y., Zhu, D., Pan, S., Xu, T., & Chen, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909938 · Cited by 107
Novel monomers for photopolymer networks
Lai, H., Peng, X., Li, L., Zhu, D., & Xiao, P. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101529 · Cited by 106
Dong, Z., Han, C., Zhao, Y., Huang, J., Ling, C., Hu, G., Wang, Y., Wang, D., Song, C., & Yang, Y. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad3929 · Cited by 106
Smart scaffolds: shape memory polymers (SMPs) in tissue engineering
Pfau, M. R., & Grunlan, M. A. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00607j · Cited by 105
Zhu, C., He, M., Sun, D., Huang, Y. X., Huang, L., Du, M., Wang, J., Wang, J., Li, Z., Hu, B., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c10898 · Cited by 105
Scaffolds for Growth Factor Delivery as Applied to Bone Tissue Engineering
Blackwood, K. A., Bock, N., Dargaville, T. R., & Woodruff, M. A. (2012) · International Journal of Polymer Science · doi:10.1155/2012/174942 · Cited by 104
Advanced biomaterials for repairing and reconstruction of mandibular defects
Zhang, Q., Wu, W., Qian, C., Xiao, W., Zhu, H., Guo, J., Meng, Z., Zhu, J., Ge, Z., & Cui, W. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109858 · Cited by 103
Macrophages in heterotopic ossification: from mechanisms to therapy
Huang, Y., Wang, X., Zhou, D., Zhou, W., Dai, F., & Lin, H. (2021) · npj Regenerative Medicine · doi:10.1038/s41536-021-00178-4 · Cited by 102
Fibrinogen scaffolds with immunomodulatory properties promote in vivo bone regeneration
Vasconcelos, D. M., Gonçalves, R. M., Almeida, C. R., Pereira, I. O., Oliveira, M. I., Nevès, N., da Silva, A. M., Ribeiro, A. C., Cunha, C., Almeida, A. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.004 · Cited by 100
Bone‐Targeted Exosomes: Strategies and Applications
Wang, J., Li, X., Wang, S., Cui, J., Ren, X., & Su, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203361 · Cited by 100
Ribezzi, D., Gueye, M., Florczak, S., Dusi, F., de Vos, D., Manente, F., Hierholzer, A., Fussenegger, M., Caiazzo, M., Blunk, T., et al. (2023) · Advanced Materials · doi:10.1002/adma.202301673 · Cited by 100
Verma, A., Kapil, A., Klobčar, D., & Sharma, A. (2023) · Materials · doi:10.3390/ma16155246 · Cited by 100
Marycz, K., Kornicka, K., & Röcken, M. (2018) · Stem Cell Reviews and Reports · doi:10.1007/s12015-018-9847-4 · Cited by 99
Magnetoelectric 3D scaffolds for enhanced bone cell proliferation
Mushtaq, F., Torlakcik, H., Vallmajó-Martín, Q., Siringil, E. C., Zhang, J., Röhrig, C., Shen, Y., Yu, Y., Chen, X., Müller, R., et al. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.06.004 · Cited by 99
Tambur, A. R., Kosmoliaptsis, V., Claas, F. H. J., Mannon, R. B., Nickerson, P. W., & Naesens, M. (2021) · Kidney International · doi:10.1016/j.kint.2021.06.026 · Cited by 97
Murphy, C. A., Lim, K. S., & Woodfield, T. B. F. (2022) · Advanced Materials · doi:10.1002/adma.202107759 · Cited by 97
Cited by
Si, Y., Li, X., Dong, S., Gao, X., Zhu, Y., Mo, L., Wang, Z., Wang, S., & Zhang, C. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.08.026 · Cited by 17
“The rapid advancement of bone tissue engineering (BTE) has significantly promoted the development of artificial bone grafting materials [6,7].”
Multimodal mechanoregulation strategies towards tissue regeneration
Yu, Q., Duan, Y., Zhu, Z., Ji, W., Zhu, C., & Li, B. (2025) · Mechanobiology in Medicine · doi:10.1016/j.mbm.2025.100159 · Cited by 8
Metadata
- Authors
- Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2024-06-28
- Volume
- 36
- Issue
- 34
- Pages
- e2403641-e2403641
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4399519315
- Cited by
- 339
- References
- 299
- FWCI
- 35.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.