The DOI matches its Crossref record; 83 of the 83 references it cites were found in a registry or an index.
Characterization of Hierarchically Ordered Porous Materials by Physisorption and Mercury Porosimetry—A Tutorial Review
Open accessAbstract
This paper is devoted to the textural characterization of nanoporous materials with a focus on hierarchically ordered materials such as mesoporous zeolites, which exhibit an interconnected pore network consisting of micro‐, meso‐, and often macropores. Hierarchically ordered zeolites have the potential to improve various industrial applications for instance in the areas of heterogeneous catalysis, separation, gas, and energy storage. Detailed insights into the pore architecture are important, because they control transport phenomena, diffusional rates, and govern selectivity, e.g. in catalyzed reactions. However, a reliable characterization of such complex pore structures is still a major challenge. Within this context, the application of advanced physisorption methodologies for micro‐mesopore analysis is discussed but also the characterization of macroporosity by mercury porosimetry is addressed. Fundamental concepts and recent major advances in understanding the underlying mechanisms are highlighted. In conjunction with selected case studies, it is illustrated how the application of advanced physisorption methodologies allows i) for the determination of reliable surface areas, pore volumes, and pore size distributions and ii) for obtaining information about pore network characteristics. This tutorial offers guidance for an advanced characterization of nanoporous materials by physisorption and mercury intrusion/extrusion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Self-citationBarrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Recommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Method for the calculation of effective pore size distribution in molecular sieve carbon.
HORVÁTH, G., & KAWAZOE, K. (1983) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.16.470 · Cited by 1,967
Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density
Lowell, S., Shields, J. E., Thomas, M. A., & Thommes, M. (2004) · Particle Technology Series · doi:10.1007/978-1-4020-2303-3 · Cited by 1,824
Self-citationPhase separation in confined systems
Gelb, L. D., Gubbins, K. E., Radhakrishnan, R., & Sliwinska-Bartkowiak, M. (1999) · Reports on Progress in Physics · doi:10.1088/0034-4885/62/12/201 · Cited by 1,568
Kruk, M., Jaroniec, M., & Sayari, A. (1997) · Langmuir · doi:10.1021/la970776m · Cited by 1,428
Physical Adsorption Characterization of Nanoporous Materials
Thommes, M. (2010) · Chemie Ingenieur Technik · doi:10.1002/cite.201000064 · Cited by 1,394
Self-citationDensity functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
Pore size distribution analysis of microporous carbons: a density functional theory approach
Lastoskie, C., Gubbins, K. E., & Quirke, N. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100120a035 · Cited by 1,219
Fluid catalytic cracking: recent developments on the grand old lady of zeolite catalysis
Vogt, E. T. C., & Weckhuysen, B. M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00376h · Cited by 1,075
Recent advances in the textural characterization of hierarchically structured nanoporous materials
Cychosz, K. A., Guillet-Nicolas, R., García-Martínez, J., & Thommes, M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00391e · Cited by 1,060
Self-citationMercury Porosimetry: A General (Practical) Overview
Giesche, H. (2006) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.200601009 · Cited by 916
Synthesis of Self-Pillared Zeolite Nanosheets by Repetitive Branching
Zhang, X., Liu, D., Xu, D., Asahina, S., Cychosz, K. A., Agrawal, K. V., Al Wahedi, Y., Bhan, A., Al Hashimi, S., Terasaki, O., et al. (2012) · Science · doi:10.1126/science.1221111 · Cited by 803
Self-citationPhysical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Self-citationSeaton, N. A., Walton, J. P. R. B., & quirke, N. (1989) · Carbon · doi:10.1016/0008-6223(89)90035-3 · Cited by 765
Ravikovitch, P. I., Vishnyakov, A., Russo, R., & Neimark, A. V. (2000) · Langmuir · doi:10.1021/la991011c · Cited by 706
Thommes, M., Smarsly, B., Groenewolt, M., Ravikovitch, P. I., & Neimark, A. V. (2006) · Langmuir · doi:10.1021/la051686h · Cited by 589
Self-citationRavikovitch, P. I., & Neimark, A. V. (2002) · Langmuir · doi:10.1021/la0107594 · Cited by 533
Curvature and parametric sensitivity in models for adsorption in micropores
Saito, A., & Foley, H. C. (1991) · AIChE Journal · doi:10.1002/aic.690370312 · Cited by 512
Ravikovitch, P. I., & Neimark, A. V. (2002) · Langmuir · doi:10.1021/la026140z · Cited by 512
Use of nitrogen vs. carbon dioxide in the characterization of activated carbons
Garrido, J., Linares-Solano, A., Martin-Martinez, J. M., Molina-Sabio, M., Rodriguez-Reinoso, F., & Torregrosa, R. (1987) · Langmuir · doi:10.1021/la00073a013 · Cited by 493
Characterization of nanoporous materials from adsorption and desorption isotherms
Ravikovitch, P. I., & Neimark, A. V. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00614-8 · Cited by 433
Capillary condensation in MMS and pore structure characterization
Neimark, A. V., & Ravikovitch, P. I. (2001) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(01)00251-7 · Cited by 415
Adsorption by Powders and Porous Solids
(2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 411
Monson, P. A. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.04.043 · Cited by 401
Characterization of Activated Carbon Fibers by CO2 Adsorption
Cazorla-Amorós, D., Alcañiz-Monge, J., & Linares-Solano, A. (1996) · Langmuir · doi:10.1021/la960022s · Cited by 397
BROEKHOFF, J. (1967) · Journal of Catalysis · doi:10.1016/0021-9517(67)90174-1 · Cited by 387
Density Functional Theory Model of Adsorption on Amorphous and Microporous Silica Materials
Ravikovitch, P. I., & Neimark, A. V. (2006) · Langmuir · doi:10.1021/la0616146 · Cited by 370
Validity of the t-plot Method to Assess Microporosity in Hierarchical Micro/Mesoporous Materials
Galarneau, A., Villemot, F., Rodriguez, J., Fajula, F., & Coasne, B. (2014) · Langmuir · doi:10.1021/la5026679 · Cited by 356
Ravikovitch, P. I., Vishnyakov, A., & Neimark, A. V. (2001) · Physical Review E · doi:10.1103/physreve.64.011602 · Cited by 329
An introduction to zeolite molecular sieves
Weitkamp, J. (1989) · Applied Catalysis · doi:10.1016/0166-9834(89)80021-1 · Cited by 325
Kerstens, D., Smeyers, B., Van Waeyenberg, J., Zhang, Q., Yu, J., & Sels, B. F. (2020) · Advanced Materials · doi:10.1002/adma.202004690 · Cited by 317
Studies in Surface Science and Catalysis
(2006) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(06)89002-6 · Cited by 302
Olivier, J. P. (1998) · Carbon · doi:10.1016/s0008-6223(98)00139-0 · Cited by 291
Transport properties of hierarchical micro–mesoporous materials
Schneider, D., Mehlhorn, D., Zeigermann, P., Kärger, J., & Valiullin, R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00715a · Cited by 289
Modeling of Adsorption and Desorption in Pores of Simple Geometry Using Molecular Dynamics
Sarkisov, L., & Monson, P. A. (2001) · Langmuir · doi:10.1021/la015521u · Cited by 267
Adsorption hysteresis in nanopores
Neimark, A. V., Ravikovitch, P. I., & Vishnyakov, A. (2000) · Physical Review E · doi:10.1103/physreve.62.r1493 · Cited by 261
Capillary Critical Point of Argon, Nitrogen, Oxygen, Ethylene, and Carbon Dioxide in MCM-41
Morishige, K., Fujii, H., Uga, M., & Kinukawa, D. (1997) · Langmuir · doi:10.1021/la970079u · Cited by 250
Temperature dependence of gas adsorption on a mesoporous solid: capillary criticality and hysteresis
Ball, P. C., & Evans, R. (1989) · Langmuir · doi:10.1021/la00087a026 · Cited by 244
Rouquerol, J., Baron, G., Denoyel, R., Giesche, H., Groen, J., Klobes, P., Levitz, P., Neimark, A. V., Rigby, S., Skudas, R., et al. (2011) · Pure and Applied Chemistry · doi:10.1351/pac-rep-10-11-19 · Cited by 241
Self-citationPorosity and Specific Surface Area Measurements for Solid Materials
Klobes, P., & Munro, R. G. (2017) · Cited by 239
Hartmann, M., & Vinu, A. (2002) · Langmuir · doi:10.1021/la025782j · Cited by 235
Vinu, A., Murugesan, V., Böhlmann, W., & Hartmann, M. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp048411f · Cited by 231
Kleitz, F., Bérubé, F., Guillet-Nicolas, R., Yang, C.-M., & Thommes, M. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp909836v · Cited by 223
Self-citationCavitation in Metastable Liquid Nitrogen Confined to Nanoscale Pores
Rasmussen, C. J., Vishnyakov, A., Thommes, M., Smarsly, B. M., Kleitz, F., & Neimark, A. V. (2010) · Langmuir · doi:10.1021/la100268q · Cited by 218
Self-citationSerrano, D. P., Aguado, J., Morales, G., Rodríguez, J. M., Peral, A., Thommes, M., Epping, J. D., & Chmelka, B. F. (2009) · Chemistry of Materials · doi:10.1021/cm801951a · Cited by 204
Self-citationMichels, N.-L., Mitchell, S., & Pérez-Ramírez, J. (2014) · ACS Catalysis · doi:10.1021/cs500353b · Cited by 201
Cheng, L. S., & Ralph T, Y. (1994) · Chemical Engineering Science · doi:10.1016/0009-2509(94)e0054-t · Cited by 178
A mesostructured Y zeolite as a superior FCC catalyst – from lab to refinery
García-Martínez, J., Li, K., & Krishnaiah, G. (2012) · Chemical Communications · doi:10.1039/c2cc35659g · Cited by 171
PHYSICAL ADSORPTION CHARACTERIZATION OF ORDERED AND AMORPHOUS MESOPOROUS MATERIALS
Thommes, M. (2004) · Series on chemical engineering · doi:10.1142/9781860946561_0011 · Cited by 158
Self-citationSilvestre‐Albero, J., Silvestre‐Albero, A., Rodríguez-Reinoso, F., & Thommes, M. (2011) · Carbon · doi:10.1016/j.carbon.2011.09.005 · Cited by 145
Self-citationThe role of pore size on the thermal stability of zeolite supported Cu SCR catalysts
Blakeman, P. G., Burkholder, E. M., Chen, H.-Y., Collier, J. E., Fedeyko, J. M., Jobson, H., & Rajaram, R. R. (2013) · Catalysis Today · doi:10.1016/j.cattod.2013.10.047 · Cited by 143
Thommes, M., Köhn, R., & Fröba, M. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp994133m · Cited by 137
Self-citationLlewellyn, P. L., Coulomb, J. P., Grillet, Y., Patarin, J., Lauter, H., Reichert, H., & Rouquérol, J. (1993) · Langmuir · doi:10.1021/la00031a036 · Cited by 136
Lee, K. X., & Valla, J. A. (2019) · Reaction Chemistry & Engineering · doi:10.1039/c9re00036d · Cited by 132
Lässig, D., Lincke, J., Moellmer, J., et al. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102329 · Cited by 116
García‐Martínez, J., Xiao, C., Cychosz, K. A., Li, K., Wan, W., Zou, X., & Thommes, M. (2014) · ChemCatChem · doi:10.1002/cctc.201402499 · Cited by 114
Self-citationHierarchically-structured porous materials: from basic understanding to applications
Hartmann, M., & Schwieger, W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs90043g · Cited by 110
Advanced Physical Adsorption Characterization of Nanoporous Carbons
Thommes, M., Cychosz, K. A., & Neimark, A. V. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-097744-7.00004-1 · Cited by 97
Self-citationModeling Mercury Porosimetry Using Statistical Mechanics
Porcheron, F., Monson, P. A., & Thommes, M. (2004) · Langmuir · doi:10.1021/la049939e · Cited by 90
Self-citationPore size characterization of micro-mesoporous carbons using CO2 adsorption
Dantas, S., Struckhoff, K. C., Thommes, M., et al. (2020) · Carbon · doi:10.1016/j.carbon.2020.11.059 · Cited by 86
Self-citationStudies in Surface Science and Catalysis
(1989) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(08)61095-2 · Cited by 85
Li, R., Chong, S., Altaf, N., Gao, Y., Louis, B., & Wang, Q. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00505 · Cited by 77
Guillet‐Nicolas, R., Bérubé, F., Thommes, M., Janicke, M. T., & Kleitz, F. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06745 · Cited by 75
Self-citationPhase Behavior and Capillary Condensation Hysteresis of Carbon Dioxide in Mesopores
Dantas, S., Struckhoff, K. C., Thommes, M., et al. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01748 · Cited by 72
Self-citationPorcheron, F., Thommes, M., Ahmad, R., et al. (2007) · Langmuir · doi:10.1021/la063080e · Cited by 69
Self-citationYu, W., Deng, L., Yuan, P., et al. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.065 · Cited by 69
Unraveling the Argon Adsorption Processes in MFI-Type Zeolite
García-Pérez, E., Parra, J. B., Ania, C. O., Dubbeldam, D., Vlugt, T. J. H., Castillo, J. M., Merkling, P. J., & Calero, S. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp803753h · Cited by 66
Caldeira, V. P. S., Peral, Á., Linares, M., de Araujo, A. S., García‐Muñoz, R. A., & Serrano, D. P. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.11.003 · Cited by 66
Guillet‐Nicolas, R., Ahmad, R., Cychosz, K. A., Kleitz, F., & Thommes, M. (2016) · New Journal of Chemistry · doi:10.1039/c5nj03466c · Cited by 63
Self-citationAl-Jubouri, S. M., Curry, N. A., & Holmes, S. M. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.08.011 · Cited by 63
Hierarchical Porous Zeolite Structures for Pressure Swing Adsorption Applications
Besser, B., Tajiri, H. A., Mikolajczyk, G., Möllmer, J., Schumacher, T. C., Odenbach, S., Gläser, R. J., Kroll, S., & Rezwan, K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11120 · Cited by 57
Thommes, M., Skudas, R., Unger, K. K., & Lubda, D. (2008) · Journal of Chromatography A · doi:10.1016/j.chroma.2008.03.077 · Cited by 47
Self-citationIn-depth study of surface resistances in nanoporous materials by microscopic diffusion measurement
Kärger, J. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.11.023 · Cited by 45
High-Resolution N2 Adsorption Isotherms at 77.4 K: Critical Effect of the He Used During Calibration
Silvestre‐Albero, J., Silvestre‐Albero, A., Llewellyn, P. L., et al. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405719a · Cited by 33
Collective Interactions of Molecules with an Interfacial Solid
Kaneko, K., Itoh, T., & Fujimori, T. (2012) · Chemistry Letters · doi:10.1246/cl.2012.466 · Cited by 33
Chemically Modified Solid Adsorbents for CO2 Capture
Titinchi, S. J. J., Piet, M., Abbo, H. S., Bolland, O., & Schwieger, W. (2014) · Energy Procedia · doi:10.1016/j.egypro.2015.12.337 · Cited by 31
A new plotting of the BET method
Keii, T., Takagi, T., & Kanetaka, S. (1961) · Analytical Chemistry · doi:10.1021/ac50154a063 · Cited by 27
Shedding New Light on Nanostructured Catalysts with Positron Annihilation Spectroscopy
Mitchell, S. J., Gerchow, L., Warringham, R., Crivelli, P., & Pérez‐Ramírez, J. (2018) · Small Methods · doi:10.1002/smtd.201800268 · Cited by 19
Synthesis of hierarchical 5A zeolites to improve the separation efficiency of n-paraffins
Liu, J., Yang, X., Wang, C., Ye, L., & Sun, H. Q. (2019) · Adsorption Science & Technology · doi:10.1177/0263617419850226 · Cited by 14
Metadata
- Authors
- Schlumberger, C., & Thommes, M.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2021-02
- Volume
- 8
- Issue
- 4
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W3129030247
- Cited by
- 536
- References
- 83
- FWCI
- 19.50
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.