The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair
Open accessAbstract
Polyetheretherketone (PEEK)/β‐tricalcium phosphate (β‐TCP) scaffolds are expected to be able to combine the excellent mechanical strength of PEEK and the good bioactivity and biodegradability of β‐TCP. While PEEK acts as a closed membrane in which β‐TCP is completely wrapped after the melting/solidifying processing, the PEEK membrane degrades very little, hence the scaffolds cannot display bioactivity and biodegradability. The strategy reported here is to blend a biodegradable polymer with PEEK and β‐TCP to fabricate multi‐material scaffolds via selective laser sintering (SLS). The biodegradable polymer first degrades and leaves caverns on the closed membrane, and then the wrapped β‐TCP is exposed to body fluid. In this study, poly(l‐lactide) (PLLA) is adopted as the biodegradable polymer. The results show that large numbers of caverns form on the membrane with the degradation of PLLA, enabling direct contact between β‐TCP and body fluid, and allowing for their ion‐exchange. As a consequence, the scaffolds display the bioactivity, biodegradability and cytocompatibility. Moreover, bone defect repair studies reveal that new bone tissues grow from the margin towards the center of the scaffolds from the histological analysis. The bone defect region is completely connected to the host bone end after 8 weeks of implantation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Bone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
Self-citationPolyetheretherketone (PEEK) for medical applications
Panayotov, I. V., Orti, V., Cuisinier, F., & Yachouh, J. (2016) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-016-5731-4 · Cited by 603
Current Strategies to Improve the Bioactivity of PEEK
Ma, R., & Tang, T. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15045426 · Cited by 491
Bone tissue engineering with porous hydroxyapatite ceramics
Yoshikawa, H., & Myoui, A. (2005) · Journal of Artificial Organs · doi:10.1007/s10047-005-0292-1 · Cited by 394
Carbon nanotube, graphene and boron nitride nanotube reinforced bioactive ceramics for bone repair
Gao, C., Feng, P., Peng, S., & Shuai, C. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.020 · Cited by 203
Self-citationNanomodified Peek Dental Implants: Bioactive Composites and Surface Modification—A Review
Najeeb, S., Khurshid, Z., Matinlinna, J. P., Siddiqui, F., Nassani, M. Z., & Baroudi, K. (2015) · International Journal of Dentistry · doi:10.1155/2015/381759 · Cited by 175
Liu, G., Duan, G., Jia, L., Wang, J., Wang, H., Cai, W., & Li, Y. (2013) · Journal of Nanomaterials · doi:10.1155/2013/365947 · Cited by 168
Poulsson, A. H. C., Eglin, D., Zeiter, S., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.12.056 · Cited by 157
Multi-layered macroporous three-dimensional nanofibrous scaffold via a novel gas foaming technique
Joshi, M. K., Pant, H. R., Tiwari, A. P., Kim, H. J., Park, C. H., & Kim, C. S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.121 · Cited by 126
Diba, M., Kharaziha, M., Fathi, M., Gholipourmalekabadi, M., & Samadikuchaksaraei, A. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.01.023 · Cited by 126
Nanomaterial-based bone regeneration
Li, Y., & Liu, C. (2017) · Nanoscale · doi:10.1039/c7nr00835j · Cited by 126
Peng, S., Feng, P., Wu, P., Huang, W., Yang, Y., Guo, W., Gao, C., & Shuai, C. (2017) · Scientific Reports · doi:10.1038/srep46604 · Cited by 116
Self-citationLiao, H.-T., Lee, M., Tsai, W., Wang, H.-C., & Lu, W.-C. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1811 · Cited by 115
Park, J., Lee, S. J., Jo, H. H., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.10.028 · Cited by 109
Xiong, Z., Zhang, X., Wang, R., de Vos, S., Wang, R., Joziasse, C. A. P., & Wang, D. (2015) · Polymer · doi:10.1016/j.polymer.2015.08.056 · Cited by 107
Safe and efficient membrane permeabilizing polymers based on PLLA for antibacterial applications
Li, Z., Chee, P. L., Owh, C., Lakshminarayanan, R., & Loh, X. J. (2016) · RSC Advances · doi:10.1039/c6ra04531f · Cited by 99
Mazzoli, A., Ferretti, C., Gigante, A. P., Salvolini, E., & Mattioli‐Belmonte, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0040 · Cited by 70
Dziadek, M., Pawlik, J., Menaszek, E., Stodolak‐Zych, E., & Cholewa‐Kowalska, K. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33350 · Cited by 66
Hasegawa, S., Takahashi, S., Iwase, H., Koizumi, S., Morishita, N., Sato, K., Narita, T., OHNUMA, M., & Maekawa, Y. (2010) · Polymer · doi:10.1016/j.polymer.2010.11.009 · Cited by 60
Li, W., Kang, J., Yuan, Y., Xiao, F., Yao, H., Liu, S., Lu, J., Wang, Y., Wang, Z., & Ren, L. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.03.013 · Cited by 52
Alginate based hybrid copolymer hydrogels—Influence of pore morphology on cell–material interaction
Thankam, F. G., & Jayabalan, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.083 · Cited by 48
In VivoBiocompatibility of PLGA-Polyhexylthiophene Nanofiber Scaffolds in a Rat Model
Subramanian, A., Krishnan, U. M., & Sethuraman, S. (2013) · BioMed Research International · doi:10.1155/2013/390518 · Cited by 45
Vicentini, N., Gatti, T., Salice, P., Scapin, G., Marega, C., Filippini, F., & Menna, E. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.094 · Cited by 39
Shariff, K. A., Tsuru, K., & Ishikawa, K. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.004 · Cited by 35
Mou, Z., Duan, L., Qi, X., et al. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.03.130 · Cited by 34
Steele, T. W. J., Huang, C. L., Kumar, S., Iskandar, A., Baoxin, A., Boey, F. Y. C., Loo, S. C. J., & Venkatraman, S. S. (2013) · NPG Asia Materials · doi:10.1038/am.2013.9 · Cited by 33
Chiang, M., Chen, E.-C., & Wu, T. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.011 · Cited by 32
Feng, P., Peng, S., Wu, P., Gao, C., Huang, W., Deng, Y., & Shuai, C. (2016) · Scientific Reports · doi:10.1038/srep33385 · Cited by 31
Self-citationLiu, T., Ding, X., Lai, D., Chen, Y., Zhang, R., Chen, J., Feng, X., Chen, X., Yang, X., Zhao, R., et al. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00889h · Cited by 25
Kundys, A., Plichta, A., Florjańczyk, Z., Frydrych, A., & Żurawski, K. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27576 · Cited by 23
Cell adhesion behavior of poly(ε-caprolactone)/poly( L -lactic acid) nanofibers scaffold
Khatri, Z., Jatoi, A. W., Ahmed, F., & Kim, I. S. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.02.061 · Cited by 22
Ge, M., Li, X., Nie, T., Ma, H., & Zhang, J. (2016) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2016.1229901 · Cited by 20
Kaur, K., Singh, K. J., Anand, V., Bhatia, G., Kaur, R., Kaur, M., Nim, L., & Arora, D. S. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.055 · Cited by 20
Influence of ceramic disk material, surface hemispheres, and SBF volume on in vitro mineralization
Edreira, E. R. U., Wolke, J. G. C., Jansen, J. A., & van den Beucken, J. J. J. P. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35406 · Cited by 11
Cited by
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Zhu, G., Zhang, T., Chen, M., Yao, K., Huang, X., Zhang, B., Li, Y., Liu, J., Wang, Y., & Zhao, Z. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.043 · Cited by 494
Biodegradable materials for bone defect repair
Wei, S., Ma, J.-X., Xu, L., Gu, X.-S., & Ma, X.-L. (2020) · Military Medical Research · doi:10.1186/s40779-020-00280-6 · Cited by 406
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Metadata
- Authors
- Feng, P., Wu, P., Gao, C., Yang, Y., Guo, W., Yang, W., & Shuai, C.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2018-04-19
- Volume
- 5
- Issue
- 6
- Pages
- 1700817-1700817
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2800175318
- Cited by
- 365
- References
- 35
- FWCI
- 15.20
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.