Cited by 453Nanomaterials and Printing TechnologiesAdvanced Sensor and Energy Harvesting MaterialsConducting polymers and applications

The DOI matches its Crossref record; 237 of the 237 references it cites were found in a registry or an index.

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

Kim, Jayoung, Kumar, Rajan, Bandodkar, Amay J., Wang, Joseph·2017·Advanced Electronic Materials

DOI 10.1002/aelm.201600260

Open this paper in CoChat — free account

Abstract

The field of printed wearable electronics has witnessed spectacular growth due to its promise to offer low‐cost, high‐performance devices for a broad range of applications. Among the sub‐fields of printed wearable electronics, printed wearable electrochemical systems are of special importance due to their widespread applications in healthcare, energy and security fields. These systems have opened up new avenues for body‐integrated electronics that were earlier impossible to achieve. These include wearable energy systems and sensors for a wide variety of applications. Much of the success of printed wearable electrochemical systems can be attributed to innovations in materials engineering that have led to novel inks comprising of new nanomaterials, polymers and composites. New generation of printed electrochemical devices include soft, stretchable and anatomically‐compliant devices that enable efficient bio‐integration and withstand high tensile stress associated with on‐body applications. Progress in materials science has also led to the development of self‐healing printed electrochemical systems for wearable applications. This review provides an overview of the key material requirements for ink formulations for realizing efficient wearable electrochemical systems such as batteries, supercapacitors, biofuel cells and sensors. Finally, major challenges impeding the field of wearable electrochemical systems are discussed along with future prospects of this exciting field.

Integrity signals

Registry

Crossref · 10.1002/aelm.201600260

Cites

237 of 237 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. G. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,636
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K., Zhao, Y., Jang, H., Lee, S., Kim, J. M., Kim, K. S., Ahn, J., Kim, P., Choi, J., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,530
Self-citation
The Li-ion rechargeable battery: a perspective.
Goodenough, J., & Park, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 8,764
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Kim, H. R., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,238
Microbial Fuel Cells: Methodology and Technology
Logan, B. E., Hamelers, H. V. M., Rozendal, R. A., Schröder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W., & Rabaey, K. (2006) · Environmental Science & Technology · doi:10.1021/es0605016 · Cited by 6,095
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Wound Healing--Aiming for Perfect Skin Regeneration
Martin, P. B. (1997) · Science · doi:10.1126/science.276.5309.75 · Cited by 4,842
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S., Zu, C., & Su, Y. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,710
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2007) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,501

Flagged first, then by citations

Show all 237 references

Research works printed but not linked: 4

Ahmed M. U., 2015, Crit. Rev. Biotechnol., 36, 495
Choi K.‐H., 2016, Energy Environ. Sci.
Wang Q., 2016, Environ. Sci., 9, 729
Selvam A. P., 2016, Sci. Rep., 6

Sorted by citations

Items 101–200 of 453

Recent Developments of Flexible and Stretchable Electrochemical Biosensors
Yang, X., & Cheng, H. (2020) · Micromachines · doi:10.3390/mi11030243 · Cited by 89
Spray-coated paper supercapacitors
Say, M. G., Brooke, R., Edberg, J., Grimoldi, A., Belaineh, D., Engquist, I., & Magnus Berggren, A. (2020) · npj Flexible Electronics · doi:10.1038/s41528-020-0079-8 · Cited by 88
A Review on Materials and Technologies for Organic Large‐Area Electronics
Buga, C. S., & Viana, J. C. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001016 · Cited by 89
Recent Advances in Sustainable Wearable Energy Devices with Nanoscale Materials and Macroscale Structures
Kim, H., Pyun, K. R., Lee, M., Lee, H., & Ko, S. H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202110535 · Cited by 87
Stretchable One-Dimensional Conductors for Wearable Applications
Nie, M., Li, B., Hsieh, Y., Fu, K. K., & Zhou, J. (2022) · ACS Nano · doi:10.1021/acsnano.2c08166 · Cited by 85
Flexible and Stretchable Biobatteries: Monolithic Integration of Membrane‐Free Microbial Fuel Cells in a Single Textile Layer
Pang, S., Gao, Y., & Choi, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702261 · Cited by 87
Laser‐Induced Graphene Composites for Printed, Stretchable, and Wearable Electronics
Tehrani, F., Beltrán‐Gastélum, M., Sheth, K., Karajić, A., Yin, L., Kumar, R., Soto, F., Kim, J., Wang, J., Barton, S., et al. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900162 · Cited by 86
Self-citation
Recent progress on printable power supply devices and systems with nanomaterials
Lin, Y., Gao, Y., Fang, F., & Fan, Z. (2018) · Nano Research · doi:10.1007/s12274-018-2068-y · Cited by 85
Electrochemical Sensing of Cannabinoids in Biofluids: A Noninvasive Tool for Drug Detection
Klimuntowski, M., Alam, M. M., Singh, G., & Howlader, M. M. R. (2020) · ACS Sensors · doi:10.1021/acssensors.9b02390 · Cited by 88
Electrochemical impedimetric biosensors, featuring the use of Room Temperature Ionic Liquids (RTILs): Special focus on non-faradaic sensing
Upasham, S., Banga, I. K., Jagannath, B., Paul, A., Lin, K., Muthukumar, S., & Prasad, S. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112940 · Cited by 86
Advances in Organic and Perovskite Photovoltaics Enabling a Greener Internet of Things
Panidi, J., Georgiadou, D. G., Schoetz, T., & Prodromakis, T. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200694 · Cited by 87
Flexible Organic Thermoelectric Materials and Devices for Wearable Green Energy Harvesting
Zhang, Y., & Park, S. (2019) · Polymers · doi:10.3390/polym11050909 · Cited by 84
3D‐Printed Wearable Electrochemical Energy Devices
Zhang, S., Liu, Y., Hao, J., Wallace, G. G., Beirne, S., & Chen, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103092 · Cited by 84
ASSURED Point-of-Need Food Safety Screening: A Critical Assessment of Portable Food Analyzers
Jafari, S., Guercetti, J., Geballa-Koukoula, A., Tsagkaris, A. S., Nelis, J. L. D., Marco, M. ‐., Salvador, J. ‐., Gerssen, A., Hajšlová, J., Elliott, C. T., et al. (2021) · Foods · doi:10.3390/foods10061399 · Cited by 83
Wearable Supercapacitors Printed on Garments
Lee, S., Choi, K., Kim, S., & Lee, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705571 · Cited by 83
Carbon-based electronic textiles: materials, fabrication processes and applications
Khair, N., Islam, R., & Shahariar, H. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03464-1 · Cited by 82
Beyond Sensitive and Selective Electrochemical Biosensors: Towards Continuous, Real-Time, Antibiofouling and Calibration-Free Devices
Campuzano, S., Pedrero, M., Gamella, M., Serafín, V., Yáñez‐Sedeño, P., & Pingarrón, J. M. (2020) · Sensors · doi:10.3390/s20123376 · Cited by 81
Developing Graphene‐Based Nanohybrids for Electrochemical Sensing
Song, H., Zhang, X., Liu, Y., & Su, Z. (2018) · The Chemical Record · doi:10.1002/tcr.201800084 · Cited by 81
Bringing Hetero‐Polyacid‐Based Underwater Adhesive as Printable Cathode Coating for Self‐Powered Electrochromic Aqueous Batteries
Li, X., Du, Z., Song, Z., Li, B., Wu, L., Liu, Q., Zhang, H., & Li, W. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800599 · Cited by 80
Metal-organic frameworks governed well-aligned conducting polymer/bacterial cellulose membranes with high areal capacitance
Zhou, J., Yuan, Y. P., Tang, J., & Tang, W. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.03.024 · Cited by 80
Edible Electrochemistry: Food Materials Based Electrochemical Sensors
Kim, J., Jeerapan, I., Ciui, B., Hartel, M. C., Martín, A., & Wang, J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700770 · Cited by 81
Self-citation
New frontier in printed thermoelectrics: formation of β-Ag 2 Se through thermally stimulated dissociative adsorption leads to high ZT
Mallick, M. M., Rösch, A. G., Franke, L., Gall, A., Ahmad, S., Geßwein, H., Mazilkin, A. A., Kübel, C., & Lemmer, U. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05859a · Cited by 78
UV-triggered self-healing polyurethane with enhanced stretchability and elasticity
Wang, Y., Liu, Q., Li, J., Ling, L., Zhang, G., Sun, R., & Wong, C. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.045 · Cited by 82
Fluid‐Dynamics‐Processed Highly Stretchable, Conductive, and Printable Graphene Inks for Real‐Time Monitoring Sweat during Stretching Exercise
Park, H. J., Jeong, J., Son, S. G., Kim, S. J., Lee, M., Kim, H., Jeong, J., Hwang, S. Y., Park, J., Eom, Y., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202011059 · Cited by 75
A focus review on 3D printing of wearable energy storage devices
Zhu, Y., Qin, J., Shi, G., Sun, C., Ingram, M., Qian, S., Lu, J., Zhang, S., & Zhong, Y. L. (2022) · Carbon Energy · doi:10.1002/cey2.199 · Cited by 76
Inkjet Process for Conductive Patterning on Textiles: Maintaining Inherent Stretchability and Breathability in Knit Structures
Kim, I., Shahariar, H., Ingram, W. F., Zhou, Y., & Jur, J. S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201807573 · Cited by 74
Design and Characterization of Screen-Printed Textile Electrodes for ECG Monitoring
Achilli, A., Bonfiglio, A., & Pani, D. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2819202 · Cited by 75
Recent advances in polymers of intrinsic microporosity (PIMs) membranes: Delving into the intrinsic microstructure for carbon capture and arduous industrial applications
Lau, H. S., Eugenia, A., Weng, Y., & Yong, W. F. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101297 · Cited by 73
Synthesis and utilization of Co3O4 doped carbon nanofiber for fabrication of hemoglobin-based electrochemical sensor
Xie, H., Luo, G., Niu, Y., Weng, W., Zhao, Y., Ling, Z., Ruan, C., Li, G., & Sun, W. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110209 · Cited by 72
Screen-Printable Functional Nanomaterials for Flexible and Wearable Single-Enzyme-Based Energy-Harvesting and Self-Powered Biosensing Devices
Veenuttranon, K., Kaewpradub, K., & Jeerapan, I. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01045-1 · Cited by 80
Micro/nanofiber-based noninvasive devices for health monitoring diagnosis and rehabilitation
Ghosh, R., Pin, K. Y., Reddy, V. S., Jayathilaka, W. A. D. M., Ji, D., Garcia, W. S., Bhargava, S. K., Ramakrishna, S., & Chinnappan, A. (2020) · Applied Physics Reviews · doi:10.1063/5.0010766 · Cited by 71
Significance of nano-materials, designs consideration and fabrication techniques on performances of strain sensors - A review
Singh, K., Sharma, S. K., Shriwastava, S., Singla, P., Gupta, M., & Tripathi, C. C. (2020) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2020.105581 · Cited by 68
Printed Strain Sensor with High Sensitivity and Wide Working Range Using a Novel Brittle–Stretchable Conductive Network
Wang, Y., Sekine, T., Takeda, Y., Hong, J., Yoshida, A., Matsui, H., Kumaki, D., Nishikawa, T., Shiba, T., Sunaga, T., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c09590 · Cited by 69
Connecting the Mechanical and Conductive Properties of Conjugated Polymers
Xie, R., Colby, R. H., & Gomez, E. D. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700356 · Cited by 69
Printed sustainable elastomeric conductor for soft electronics
Lv, J., Thangavel, G., Xin, Y., Gao, D., Poh, W. C., Chen, S., & Lee, P. S. (2023) · Nature Communications · doi:10.1038/s41467-023-42838-7 · Cited by 87
Buckled Conductive Polymer Ribbons in Elastomer Channels as Stretchable Fiber Conductor
Zhou, J., Tian, G., Jin, G., Xin, Y., Tao, R., & Gilles Lubineau, A. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201907316 · Cited by 68
Sustainable and high-power wearable glucose biofuel cell using long-term and high-speed flow in sportswear fabrics
Wang, C., Shim, E., Chang, H., Lee, N., Kim, H. R., & Park, J. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112652 · Cited by 69
Recent Progress in Aqueous Ammonium-Ion Batteries
Wang, Y., & Kuchena, S. F. (2022) · ACS Omega · doi:10.1021/acsomega.2c04118 · Cited by 68
Development of novel flexible heat pipe with multistage design inspired by structure of human spine
Huang, J., Zhou, W., Xiang, J., Liu, C., Gao, Y., Li, S., & Ling, W. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115392 · Cited by 66
Recent Advances in Carbon and Metal Based Supramolecular Technology for Supercapacitor Applications
Hasan, M. M., Islam, T., Shah, S. S., Awal, A., Aziz, M. A., & Ahammad, A. J. S. (2022) · The Chemical Record · doi:10.1002/tcr.202200041 · Cited by 66
Nanostructured Conducting Polymers and Their Applications in Energy Storage Devices
del Valle, M. A., Gacitúa, M. A., Hernández, F., Luengo, M., & Hernández, L. A. (2023) · Polymers · doi:10.3390/polym15061450 · Cited by 71
Sensing at Your Fingertips: Glove‐based Wearable Chemical Sensors
Hubble, L. J., & Wang, J. (2018) · Electroanalysis · doi:10.1002/elan.201800743 · Cited by 64
Self-citation
Surfactant-assisted water-based graphene conductive inks for flexible electronic applications
Htwe, Y. Z. N., & Mariatti, M. (2021) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2021.06.022 · Cited by 65
Recent advances and perspectives of 3D printed micro-supercapacitors: from design to smart integrated devices
Zong, W., Ouyang, Y., Miao, Y.-E., Liu, T., & Lai, F. (2022) · Chemical Communications · doi:10.1039/d1cc05544e · Cited by 66
Flexible ferroelectric wearable devices for medical applications
Tsikriteas, Z. M., Roscow, J. I., Bowen, C., & Khanbareh, H. (2020) · iScience · doi:10.1016/j.isci.2020.101987 · Cited by 64
Beyond flexible-Li-ion battery systems for soft electronics
Mukherjee, S., Albertengo, A., & Djenizian, T. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.08.020 · Cited by 65
Fabricating flexible conductive structures by printing techniques and printable conductive materials
Sun, J., Sun, R., Jia, P., Ma, M., & Song, Y. (2022) · Journal of Materials Chemistry C · doi:10.1039/d2tc01168a · Cited by 65
Size Control of Carbon Spherical Shells for Sensitive Detection of Paracetamol in Sweat, Saliva, and Urine
de Campos, A. M., Raymundo‐Pereira, P. A., Mendonça, C. D., Calegaro, M. L., Machado, S. A. S., & Oliveira, O. N. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.7b00139 · Cited by 64
Extrusion‐Based 3D‐Printed Supercapacitors: Recent Progress and Challenges
Yan, X. Y., Tong, Y., Wang, X., Hou, F., & Liang, J. (2021) · Energy & environment materials · doi:10.1002/eem2.12260 · Cited by 63
Printed Strain Sensors for On‐Skin Electronics
Li, Y., Liu, Y., Bhuiyan, S. R. A., Zhu, Y., & Yao, S. (2021) · Small Structures · doi:10.1002/sstr.202100131 · Cited by 66
Biomimetic printable nanocomposite for healable, ultrasensitive, stretchable and ultradurable strain sensor
Liu, Y., Shi, X., Liu, S., Li, H., Zhang, H., Wang, C., Liang, J., & Chen, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103898 · Cited by 64
Modern Analytical Techniques for Detection of Bacteria in Surface and Wastewaters
Canciu, A., Tertiş, M., Hosu, O., Cernat, A., Cristea, C., & Graur, F. (2021) · Sustainability · doi:10.3390/su13137229 · Cited by 62
Electrochemically Exfoliated Graphene Additive‐Free Inks for 3D Printing Customizable Monolithic Integrated Micro‐Supercapacitors on a Large Scale
Zhang, L., Qin, J., Das, P., Wang, S., Bai, T., Zhou, F., Wu, M., & Wu, Z. (2024) · Advanced Materials · doi:10.1002/adma.202313930 · Cited by 62
Recent Advances in Printed Thin-Film Batteries
Clement, B., Lyu, M., Kulkarni, E. S., Lin, T., Hu, Y., Lockett, V., Greig, C. R., & Wang, L. (2022) · Engineering · doi:10.1016/j.eng.2022.04.002 · Cited by 63
Electronic Fibers/Textiles for Health‐Monitoring: Fabrication and Application
Yin, Z., Lü, H., Gan, L., & Zhang, Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200654 · Cited by 63
Direct electrochemical biosensing in gastrointestinal fluids
Montiel, V. R., Sempionatto, J. R., Campuzano, S., Pingarrón, J. M., de Ávila, B. E., & Wang, J. (2018) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-018-1528-2 · Cited by 63
Self-citation
Flexible and stretchable microbial fuel cells with modified conductive and hydrophilic textile
Pang, S., Gao, Y., & Choi, S. (2017) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2017.09.044 · Cited by 60
Carbonyl‐Based π‐Conjugated Materials: From Synthesis to Applications in Lithium‐Ion Batteries
Oubaha, H., Gohy, J., & Melinte, S. (2019) · ChemPlusChem · doi:10.1002/cplu.201800652 · Cited by 60
Structure-designed fabrication of all-printed flexible in-plane solid-state supercapacitors for wearable electronics
Liu, L., Yu, F., Liang, J., Li, S., Tian, B., Yao, W., & Wu, W. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.03.118 · Cited by 60
Recent Progress in 3D Printed Mold-Based Sensors
He, S., Feng, S., Nag, A., Afsarimanesh, N., Han, T., & Mukhopadhyay, S. C. (2020) · Sensors · doi:10.3390/s20030703 · Cited by 59
Wearable electrochemical flexible biosensors: With the focus on affinity biosensors
Takaloo, S., & Zand, M. M. (2021) · Sensing and Bio-Sensing Research · doi:10.1016/j.sbsr.2021.100403 · Cited by 59
Advanced ceramics in energy storage applications: Batteries to hydrogen energy
Randhawa, K. S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113122 · Cited by 62
Determination of halides using Ag nanoparticles-modified disposable electrodes. A first approach to a wearable sensor for quantification of chloride ions
Bujes-Garrido, J., Izquierdo-Bote, D., Heras, A., Colina, Á., & Arcos‐Martínez, M. J. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.01.063 · Cited by 59
Electrochemical (bio)sensors: promising tools for green analytical chemistry
Yáñez‐Sedeño, P., Campuzano, S., & Pingarrón, J. M. (2019) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.01.004 · Cited by 59
Resettable sweat-powered wearable electrochromic biosensor
Hartel, M. C., Lee, D.-W., Weiss, P. S., Wang, J., & Kim, J. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114565 · Cited by 58
Self-citation
Scaling Printable Zn–Ag2O Batteries for Integrated Electronics
Kumar, R., Johnson, K. M., Williams, N. X., & Subramanian, V. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803645 · Cited by 56
Self-citation
Graphene-Based Inks for Printing of Planar Micro-Supercapacitors: A Review
Tran, T. S., Dutta, N. K., & Choudhury, N. R. (2019) · Materials · doi:10.3390/ma12060978 · Cited by 58
2D and 3D printing for graphene based supercapacitors and batteries: A review
Mensing, J. P., Lomas, T., & Tuantranont, A. (2020) · Sustainable materials and technologies · doi:10.1016/j.susmat.2020.e00190 · Cited by 59
A review of application and prospect for polyoxometalate-based composites in electrochemical sensor
Chen, Y., Li, F., Li, S., Zhang, L., & Sun, M. (2021) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2021.109084 · Cited by 57
Sustainable Printed Electrochemical Platforms for Greener Analytics
Sfragano, P. S., Laschi, S., & Palchetti, I. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00644 · Cited by 59
Perspective—Challenges in Developing Wearable Electrochemical Sensors for Longitudinal Health Monitoring
Fan, R., & Andrew, T. L. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab67b0 · Cited by 54
Screen‐Printed Flexible Strain Sensors with Ag Nanowires for Intelligent and Tamper‐Evident Packaging Applications
Ke, S., Guo, P., Pang, C., Tian, B., Luo, C., Zhu, H., & Wu, W. H. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901097 · Cited by 56
Facile Wearable Vapor/Liquid Amphibious Methanol Sensor
Jiang, Y., Ma, J., Lv, J., Ma, H., Xia, H., Wang, J., Yang, C., Xue, M., Li, G., & Zhu, N. (2018) · ACS Sensors · doi:10.1021/acssensors.8b01111 · Cited by 55
Self-citation
Integration designs toward new‐generation wearable energy supply‐sensor systems for real‐time health monitoring: A minireview
Tang, Y., Li, X., Lv, H., Wang, W., Zhi, C., & Li, H. (2020) · InfoMat · doi:10.1002/inf2.12102 · Cited by 55
Soft Materials for Wearable/Flexible Electrochemical Energy Conversion, Storage, and Biosensor Devices
Bocchetta, P., Frattini, D., Ghosh, S., Mohan, A. M. V., Kumar, Y., & Kwon, Y. (2020) · Materials · doi:10.3390/ma13122733 · Cited by 57
A new nanoparticle-reinforced silicone rubber composite integrating high strength and strong adhesion
Liu, J., Yao, Y., Chen, S., Li, X., & Zhang, Z. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106645 · Cited by 53
Nanocellulose and PEDOT:PSS composites and their applications
Brooke, R., Lay, M., Jain, K., Françon, H., Say, M. G., Belaineh, D., Wang, X., Håkansson, K. M. O., Wågberg, L., Isak Engquist, A., et al. (2022) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2022.2106491 · Cited by 54
Versatile carbon-loaded shellac ink for disposable printed electronics
Poulin, A., Aeby, X., Siqueira, G. D. F., & Nyström, G. (2021) · Scientific Reports · doi:10.1038/s41598-021-03075-4 · Cited by 53
Water-based graphene/AgNPs hybrid conductive inks for flexible electronic applications
Htwe, Y. Z. N., Abdullah, M. K., & Mariatti, M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.11.159 · Cited by 53
Advanced Nanomaterials, Printing Processes, and Applications for Flexible Hybrid Electronics
Park, S., Kim, H., Kim, J., & Yeo, W. (2020) · Materials · doi:10.3390/ma13163587 · Cited by 53
Self-citation
Printed Organic Transistor‐Based Enzyme Sensor for Continuous Glucose Monitoring in Wearable Healthcare Applications
Mano, T., Nagamine, K., Ichimura, Y., Shiwaku, R., Furusawa, H., Matsui, H., Kumaki, D., & Tokito, S. (2018) · ChemElectroChem · doi:10.1002/celc.201801129 · Cited by 52
Nanostructured wearable electrochemical and biosensor towards healthcare management: a review
Khaleque, M. A., Hossain, M. I., Ali, M. R., Bacchu, M. S., Aly, M. A. S., & Khan, M. Z. H. (2023) · RSC Advances · doi:10.1039/d3ra03440b · Cited by 55
Self‐Healable Materials for Underwater Applications
Huynh, T., Khatib, M., & Haick, H. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900081 · Cited by 51
Printable wet-resistive textile strain sensors using bead-blended composite ink for robustly integrative wearable electronics
Jang, S., Choi, J. Y., Yoo, E.-S., Lim, D. Y., Lee, J. Y., Kim, J. K., & Pang, C. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108674 · Cited by 51
Self-citation
Polymer nanocomposite-based biomolecular sensor for healthcare monitoring
Natarajan, B., Kannan, P., Maduraiveeran, G., & Alnaser, A. S. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103557 · Cited by 51
Highly Stable Battery Pack via Insulated, Reinforced, Buckling‐Enabled Interconnect Array
Yin, L., Seo, J. K., Kurniawan, J. F., Kumar, R., Lv, J., Xie, L., Liu, X., Xu, S. H., Meng, Y. S., & Wang, J. (2018) · Small · doi:10.1002/smll.201800938 · Cited by 51
Self-citation
An electrochemical dopamine aptasensor using the modified Au electrode with spindle-shaped gold nanostructure
Taheri, R. A., Eskandari, K., & Negahdary, M. (2018) · Microchemical Journal · doi:10.1016/j.microc.2018.08.008 · Cited by 50
Conductive Polymer‐Based Electronics in Additive Manufacturing: Materials, Processing, and Applications
Khan, M., Refati, M. F. A. D., Arup, M. M. R., Islam, M. A., & Mobarak, M. H. (2025) · Advances in Polymer Technology · doi:10.1155/adv/4234491 · Cited by 50
Solution‐Based 3D Printing of Polymers of Intrinsic Microporosity
Zhang, F., Ma, Y., Liao, J., Breedveld, V., & Lively, R. P. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201800274 · Cited by 48
A review of smart electrochemical devices for pesticide detection in agricultural food and runoff contaminants
Nehru, R., Chen, C., & Dong, C. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173360 · Cited by 46
Fundamentals of ATR-FTIR Spectroscopy and Its Role for Probing In-Situ Molecular-Level Interactions
Kaur, H., Rana, B., Tomar, D. S., Kaur, S., & Jena, K. C. (2021) · Progress in optical science and photonics · doi:10.1007/978-981-33-6084-6_1 · Cited by 54
Multi‐Layer Printable Lithium Ion Micro‐Batteries with Remarkable Areal Energy Density and Flexibility for Wearable Smart Electronics
Zhang, Y., Zheng, S., Zhou, X., Shi, X., Dong, C., Das, P., Ma, J., Wang, K., & Wu, Z. (2021) · Small · doi:10.1002/smll.202104506 · Cited by 45
Design and construction of 1D/2D/3D fabric-based wearable micro-supercapacitors
Lin, X., Li, X., Yang, N., Li, X., Yao, J., Zhang, W., Yan, R., Xu, J., & Komarneni, S. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232712 · Cited by 44
Cost-effective silver ink for printable and flexible electronics with robust mechanical performance
Bhat, K. S., Nakate, U. T., Yoo, J.-Y., Wang, Y., Mahmoudi, T., & Hahn, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.033 · Cited by 44
Year 2020: A Snapshot of the Last Progress in Flexible Printed Gas Sensors
Fioravanti, A., & Carotta, M. C. (2020) · Applied Sciences · doi:10.3390/app10051741 · Cited by 44
Thermal performance of flexible branch heat pipe
Huang, J., Xiang, J., Chu, X., Sun, W., Liu, R., Ling, W., Zhou, W., & Tao, S. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116532 · Cited by 44
Strategies for Electrochemical Point-of-Care Biosensors
Wachholz, D., Deroco, P. B., Hryniewicz, B. M., & Kubota, L. T. (2025) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-071124-103739 · Cited by 48
Solvent-Free Deposition of Ultrathin Copolymer Films with Tunable Viscoelasticity for Application to Pressure-Sensitive Adhesives
Moon, H., Jeong, K., Kwak, M. J., Choi, S. Q., & Im, S. G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10009 · Cited by 43
Enhanced Electrical Conductivity and Seebeck Coefficient in PEDOT:PSS via a Two-Step Ionic liquid and NaBH4 Treatment for Organic Thermoelectrics
Atoyo, J., Burton, M., McGettrick, J., & Carnie, M. J. (2020) · Polymers · doi:10.3390/polym12030559 · Cited by 43
Fully screen printed stretchable electrochromic displays
Linderhed, U., Petsagkourakis, I., Ersman, P. A., Beni, V., & Tybrandt, K. (2021) · Flexible and Printed Electronics · doi:10.1088/2058-8585/ac3eb2 · Cited by 40

Authors: Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J.
Affiliations: University of California San Diego (US)
Corresponding author: Wang, Joseph
ORCID: Kim, Jayoung
Kumar, Rajan
Bandodkar, Amay J.
Wang, Joseph
Venue: Advanced Electronic Materials
Publisher: Wiley
Published: 2016-12-07
Volume: 3
Issue: 1
ISSN: 2199-160X (ISSN-L)
DOI: 10.1002/aelm.201600260
OpenAlex: W2560773225
Cited by: 452
References: 237
Citations by year: 2026: 14 · 2025: 30 · 2024: 34 · 2023: 32 · 2022: 60 · 2021: 72 · 2020: 78 · 2019: 65 · 2018: 47 · 2017: 19
FWCI: 2.16
Type: journal article
Language: en
Open access: closed
Licence: onlinelibrary.wiley.com/termsAndConditions#am (am, 365 d)
onlinelibrary.wiley.com/termsAndConditions#vor (vor)
Locations: Advanced Electronic Materials (publishedVersion)
Funders: National Institutes of Health (R21EB019698)
Defense Threat Reduction Agency (HDTRA1‐16‐1‐0013)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
Keywords: stretchable electronics, self-healing materials, printed batteries, printed supercapacitors, printed sensors, nanomaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks