Cited by 453Nanomaterials and Printing TechnologiesAdvanced Sensor and Energy Harvesting MaterialsConducting polymers and applications

The DOI matches its Crossref record; 237 of the 237 references it cites were found in a registry or an index.

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

Kim, Jayoung, Kumar, Rajan, Bandodkar, Amay J., Wang, Joseph·2017·Advanced Electronic Materials

DOI 10.1002/aelm.201600260

Open this paper in CoChat — free account

Abstract

The field of printed wearable electronics has witnessed spectacular growth due to its promise to offer low‐cost, high‐performance devices for a broad range of applications. Among the sub‐fields of printed wearable electronics, printed wearable electrochemical systems are of special importance due to their widespread applications in healthcare, energy and security fields. These systems have opened up new avenues for body‐integrated electronics that were earlier impossible to achieve. These include wearable energy systems and sensors for a wide variety of applications. Much of the success of printed wearable electrochemical systems can be attributed to innovations in materials engineering that have led to novel inks comprising of new nanomaterials, polymers and composites. New generation of printed electrochemical devices include soft, stretchable and anatomically‐compliant devices that enable efficient bio‐integration and withstand high tensile stress associated with on‐body applications. Progress in materials science has also led to the development of self‐healing printed electrochemical systems for wearable applications. This review provides an overview of the key material requirements for ink formulations for realizing efficient wearable electrochemical systems such as batteries, supercapacitors, biofuel cells and sensors. Finally, major challenges impeding the field of wearable electrochemical systems are discussed along with future prospects of this exciting field.

Integrity signals

Registry

Crossref · 10.1002/aelm.201600260

Cites

237 of 237 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. G. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,636
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K., Zhao, Y., Jang, H., Lee, S., Kim, J. M., Kim, K. S., Ahn, J., Kim, P., Choi, J., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,530
Self-citation
The Li-ion rechargeable battery: a perspective.
Goodenough, J., & Park, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 8,764
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Kim, H. R., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,238
Microbial Fuel Cells: Methodology and Technology
Logan, B. E., Hamelers, H. V. M., Rozendal, R. A., Schröder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W., & Rabaey, K. (2006) · Environmental Science & Technology · doi:10.1021/es0605016 · Cited by 6,095
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Wound Healing--Aiming for Perfect Skin Regeneration
Martin, P. B. (1997) · Science · doi:10.1126/science.276.5309.75 · Cited by 4,842
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S., Zu, C., & Su, Y. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,710
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2007) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,501
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P., Siddiqui, N. A., Marom, G., & Kim, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,479
Self-citation
A stretchable carbon nanotube strain sensor for human-motion detection
Yamada, T., Hayamizu, Y., Yamamoto, Y., Yomogida, Y., Izadi-Najafabadi, A., Futaba, D. N., & Hata, K. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.36 · Cited by 3,247
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Evaluation of Solution-Processed Reduced Graphene Oxide Films as Transparent Conductors
Becerril, H. A., Mao, J., Liu, Z., Stoltenberg, R. M., Bao, Z., & Chen, Y. (2008) · ACS Nano · doi:10.1021/nn700375n · Cited by 3,159
Transfer of Large-Area Graphene Films for High-Performance Transparent Conductive Electrodes
Li, X., Zhu, Y., Cai, W., Borysiak, M. D., Han, B., Chen, D., Piner, R. D., Colombo, L., & Ruoff, R. S. (2009) · Nano Letters · doi:10.1021/nl902623y · Cited by 3,107
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2014) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,728
Liquid Phase Production of Graphene by Exfoliation of Graphite in Surfactant/Water Solutions
Lotya, M., Hernández, Y., King, P. J., Smith, R. J., Nicolosi, V., Karlsson, L., Blighe, F. M., De, S., Wang, Z., McGovern, I. T., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807449u · Cited by 2,285
Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures
Hecht, D. S., Hu, L., & Irvin, G. C. (2011) · Advanced Materials · doi:10.1002/adma.201003188 · Cited by 2,282
Recent Advances in Design and Fabrication of Electrochemical Supercapacitors with High Energy Densities
Yan, J., Wang, Q., Wei, T., & Fan, Z. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300816 · Cited by 2,256
Transparent conducting oxide semiconductors for transparent electrodes
Minami, T. (2005) · Semiconductor Science and Technology · doi:10.1088/0268-1242/20/4/004 · Cited by 2,173
Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare
Trung, T. Q., & Lee, N. (2016) · Advanced Materials · doi:10.1002/adma.201504244 · Cited by 2,160
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D. K., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,072
Lightweight and Flexible Graphene Foam Composites for High‐Performance Electromagnetic Interference Shielding
Chen, Z., Xu, C., Ma, C., Ren, W., & Cheng, H. (2013) · Advanced Materials · doi:10.1002/adma.201204196 · Cited by 1,996
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,859
Stretchable active-matrix organic light-emitting diode display using printable elastic conductors
Sekitani, T., Nakajima, H., Maeda, H., Fukushima, T., Aida, T., Hata, K., & Someya, T. (2009) · Nature Materials · doi:10.1038/nmat2459 · Cited by 1,769
Strong, Transparent, Multifunctional, Carbon Nanotube Sheets
Zhang, M., Fang, S., Zakhidov, A. A., Lee, S. B., Aliev, A. E., Williams, C. D., Atkinson, K. R., & Baughman, R. H. (2005) · Science · doi:10.1126/science.1115311 · Cited by 1,669
Application of conducting polymers to biosensors
Gerard, M. (2002) · Biosensors and Bioelectronics · doi:10.1016/s0956-5663(01)00312-8 · Cited by 1,661
Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells
Chaudhuri, S. K., & Lovley, D. R. (2003) · Nature Biotechnology · doi:10.1038/nbt867 · Cited by 1,579
Self-Healing Polymers and Composites
Blaiszik, B. J., Kramer, S. L. B., Olugebefola, S. C., Moore, J. S., Sottos, N. R., & White, S. R. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104532 · Cited by 1,505
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Self-citation
Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites
Zhao, X., Zhang, Q., Chen, D., & Lu, P. (2010) · Macromolecules · doi:10.1021/ma902862u · Cited by 1,447
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,365
Highly Conductive and Stretchable Silver Nanowire Conductors
Xu, F., & Zhu, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201886 · Cited by 1,315
A Physically Transient Form of Silicon Electronics
Hwang, S.-W., Tao, H., Kim, D.-H., Cheng, H., Song, J.-K., Rill, E., Brenckle, M. A., Panilaitis, B., Won, S. M., Kim, Y.-S., et al. (2012) · Science · doi:10.1126/science.1226325 · Cited by 1,286
Non-invasive wearable electrochemical sensors: a review
Bandodkar, A. J., & Wang, J. (2014) · Trends in Biotechnology · doi:10.1016/j.tibtech.2014.04.005 · Cited by 1,247
Self-citation
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,241
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,193
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L., Wan, Y., Yan, D. S., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,191
Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes
Vosgueritchian, M., Lipomi, D. J., & Bao, Z. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101775 · Cited by 1,177
Solution‐Processed Metallic Conducting Polymer Films as Transparent Electrode of Optoelectronic Devices
Xia, Y., Sun, K., & Ouyang, J. (2012) · Advanced Materials · doi:10.1002/adma.201104795 · Cited by 1,148
Wearable multifunctional sensors using printed stretchable conductors made of silver nanowires
Yao, S., & Zhu, Y. (2014) · Nanoscale · doi:10.1039/c3nr05496a · Cited by 1,028
Carbon Nanotube Thin Films: Fabrication, Properties, and Applications
Hu, L., Hecht, D. S., & Gruner, G. (2010) · Chemical Reviews · doi:10.1021/cr9002962 · Cited by 1,022
Graphene-based wireless bacteria detection on tooth enamel
Mannoor, M. S., Tao, H., Clayton, J. D., Sengupta, A., Kaplan, D. L., Naik, R. R., Verma, N., Omenetto, F. G., & McAlpine, M. C. (2012) · Nature Communications · doi:10.1038/ncomms1767 · Cited by 1,014
Low-Temperature Solution Processing of Graphene−Carbon Nanotube Hybrid Materials for High-Performance Transparent Conductors
Tung, V., Chen, L., Allen, M. J., Wassei, J. K., Nelson, K. S., Kaner, R. B., & Yang, Y. (2009) · Nano Letters · doi:10.1021/nl9001525 · Cited by 1,011
Organic Light-Emitting Diodes on Solution-Processed Graphene Transparent Electrodes
Wu, J., Agrawal, M., Becerril, H. A., Bao, Z., Liu, Z., Chen, Y., & Peumans, P. (2009) · ACS Nano · doi:10.1021/nn900728d · Cited by 985
Conductive Nanomaterials for Printed Electronics
Kamyshny, A. L., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 945
Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres
Park, M., Im, J., Shin, M., Min, Y., Park, J., Cho, H., Park, S., Shim, M., Jeon, S., Chung, D., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.206 · Cited by 919
Efficient and Flexible ITO‐Free Organic Solar Cells Using Highly Conductive Polymer Anodes
Na, S., Kim, S., Jo, J., & Kim, D. (2008) · Advanced Materials · doi:10.1002/adma.200800338 · Cited by 882
Printable elastic conductors with a high conductivity for electronic textile applications
Matsuhisa, N., Kaltenbrunner, M., Yokota, T., Jinno, H., Kuribara, K., Sekitani, T., & Someya, T. (2015) · Nature Communications · doi:10.1038/ncomms8461 · Cited by 880
Electrochemical Tattoo Biosensors for Real-Time Noninvasive Lactate Monitoring in Human Perspiration
Jia, W., Bandodkar, A. J., Valdés-Ramírez, G., Windmiller, J. R., Yang, Z., Ramírez, J., Chan, G., & Wang, J. (2013) · Analytical Chemistry · doi:10.1021/ac401573r · Cited by 862
Self-citation
A wearable chemical–electrophysiological hybrid biosensing system for real-time health and fitness monitoring
Imani, S., Bandodkar, A. J., Mohan, A. M. V., Kumar, R., Yu, S., Wang, J., & Mercier, P. P. (2016) · Nature Communications · doi:10.1038/ncomms11650 · Cited by 861
Self-citation
Highly conductive, printable and stretchable composite films of carbon nanotubes and silver
Chun, K., Oh, Y., Rho, J., Ahn, J., Kim, Y., Choi, H. R., & Baik, S. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.232 · Cited by 860
Self-healing structural composite materials
Kessler, M. R., Sottos, N. R., & White, S. R. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(03)00138-6 · Cited by 826
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J. N., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 825
Wearable Self‐Charging Power Textile Based on Flexible Yarn Supercapacitors and Fabric Nanogenerators
Pu, X., Li, L., Liu, M., Jiang, C., Du, C., Zhao, Z., Hu, W., & Wang, Z. L. (2016) · Advanced Materials · doi:10.1002/adma.201504403 · Cited by 820
Recent advances in electrochemical glucose biosensors: a review
Chen, C., Xie, Q., Yang, D., Xiao, H., Fu, Y., Tan, Y., & Yao, S. (2012) · RSC Advances · doi:10.1039/c2ra22351a · Cited by 816
Microcapsule induced toughening in a self-healing polymer composite
Brown, E., White, S. R., & Sottos, N. R. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000016173.73733.dc · Cited by 751
Comparative study of carbon nanotube dispersion using surfactants
Rastogi, R. P., Kaushal, R., Tripathi, S. K., Sharma, A. L., Kaur, I., & Bharadwaj, L. M. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.09.015 · Cited by 739
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C. Y., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 732
Wearable Electrochemical Sensors and Biosensors: A Review
Windmiller, J. R., & Wang, J. (2012) · Electroanalysis · doi:10.1002/elan.201200349 · Cited by 717
Self-citation
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Secor, E. B., Prabhumirashi, P. L., Puntambekar, K. P., Geier, M. L., & Hersam, M. C. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400644c · Cited by 706
Tattoo-Based Noninvasive Glucose Monitoring: A Proof-of-Concept Study
Bandodkar, A. J., Jia, W., Yardımcı, C., Wang, X., Ramirez, J., & Wang, J. (2015) · Analytical Chemistry · doi:10.1021/ac504300n · Cited by 700
Self-citation
Highly Flexible Silver Nanowire Electrodes for Shape‐Memory Polymer Light‐Emitting Diodes
Yu, Z., Zhang, Q., Li, L., Chen, Q., Niu, X., Liu, J., & Pei, Q. (2011) · Advanced Materials · doi:10.1002/adma.201003398 · Cited by 688
Wearable salivary uric acid mouthguard biosensor with integrated wireless electronics
Kim, J., Imani, S., de Araujo, W. R., Warchall, J., Valdés-Ramírez, G., Paixão, T. R. L. C., Mercier, P. P., & Wang, J. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.07.039 · Cited by 678
Self-citation
Organic materials for printed electronics
Berggren, M., Nilsson, D., & Robinson, N. D. (2007) · Nature Materials · doi:10.1038/nmat1817 · Cited by 664
Highly Sensitive and Stretchable Multidimensional Strain Sensor with Prestrained Anisotropic Metal Nanowire Percolation Networks
Kim, K. K., Hong, S., Cho, H. M., Lee, J., Suh, Y. D., Ham, J., & Ko, S. H. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01505 · Cited by 626
Electrochemical sensing of heavy metal ions with inorganic, organic and bio-materials
Cui, L., Wu, J., & Ju, H. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2014.07.052 · Cited by 618
Electromagnetic generator for harvesting energy from human motion
Saha, C. R., O’Donnell, T., Wang, N., & McCloskey, P. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2008.03.008 · Cited by 608
Organic Photovoltaic Devices Using Highly Flexible Reduced Graphene Oxide Films as Transparent Electrodes
Yin, Z., Sun, S., Salim, T., Wu, S., Huang, X. B., He, Q., Lam, Y. M., & Zhang, H. (2010) · ACS Nano · doi:10.1021/nn1015874 · Cited by 600
Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites
Ma, P., Mo, S.-Y., Tang, B. Z., & Kim, J. (2010) · Carbon · doi:10.1016/j.carbon.2010.01.028 · Cited by 578
Self-citation
Carbon nanotube films for transparent and plastic electronics
Gruner, G. (2006) · Journal of Materials Chemistry · doi:10.1039/b603821m · Cited by 568
Knitted and screen printed carbon-fiber supercapacitors for applications in wearable electronics
Jost, K., Stenger, D., Pérez, C. R., McDonough, J. K., Lian, K. K., Gogotsi, Y. G., & Dion, G. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40515j · Cited by 556
A Water‐Based Silver‐Nanowire Screen‐Print Ink for the Fabrication of Stretchable Conductors and Wearable Thin‐Film Transistors
Liang, J., Tong, K., & Pei, Q. (2016) · Advanced Materials · doi:10.1002/adma.201600772 · Cited by 538
Inkjet Printing of Electrically Conductive Patterns of Carbon Nanotubes
Kordás, K., Mustonen, T., Tóth, G., Jantunen, H. M., Lajunen, M., Soldano, C., Talapatra, S., Kar, S., Vajtai, R., & Ajayan, P. M. (2006) · Small · doi:10.1002/smll.200600061 · Cited by 522
High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 512
Polymer Photovoltaic Cells with Conducting Polymer Anodes
Zhang, F., Johansson, M., Andersson, M. R., Hummelen, J. C., & Inganäs, O. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020503)14:9 · Cited by 501
Self‐Healing of Chemical Gels Cross‐Linked by Diarylbibenzofuranone‐Based Trigger‐Free Dynamic Covalent Bonds at Room Temperature
Imato, K., Nishihara, M., Kanehara, T., Amamoto, Y., Takahara, A., & Otsuka, H. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201104069 · Cited by 497
Epidermal tattoo potentiometric sodium sensors with wireless signal transduction for continuous non-invasive sweat monitoring
Bandodkar, A. J., Molinnus, D., Mirza, O., Guinovart, T., Windmiller, J. R., Valdés-Ramírez, G., Andrade, F. J., Schöning, M. J., & Wang, J. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.11.039 · Cited by 490
Self-citation
A colour-tunable, weavable fibre-shaped polymer light-emitting electrochemical cell
Zhang, Z., Guo, K., Li, Y., Li, X., Guan, G., Li, H., Luo, Y., Zhao, F., Zhang, Q., Wei, B., et al. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.37 · Cited by 482
Reactive Silver Inks for Patterning High-Conductivity Features at Mild Temperatures
Walker, S. B., & Lewis, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja209267c · Cited by 459
Self-Healing Polymeric Materials Using Epoxy/Mercaptan as the Healant
Yuan, Y., Rong, M. Z., Zhang, M. Q., Chen, J., Yang, G. C., & Li, X. M. (2008) · Macromolecules · doi:10.1021/ma800028d · Cited by 444
Mechanically Sintered Gallium–Indium Nanoparticles
Boley, J. W., White, E. L., & Kramer, R. K. (2015) · Advanced Materials · doi:10.1002/adma.201404790 · Cited by 443
Inkjet printing of single-walled carbon nanotube/RuO2 nanowire supercapacitors on cloth fabrics and flexible substrates
Chen, P., Chen, H., Qiu, J., & Zhou, C. (2010) · Nano Research · doi:10.1007/s12274-010-0020-x · Cited by 435
Disposable Screen Printed Electrochemical Sensors: Tools for Environmental Monitoring
Hayat, A., & Marty, J. (2014) · Sensors · doi:10.3390/s140610432 · Cited by 433
Aqueous Dispersion of Graphene Sheets Stabilized by Pluronic Copolymers: Formation of Supramolecular Hydrogel
Zu, S., & Han, B. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9035887 · Cited by 431
Wearable Textile Battery Rechargeable by Solar Energy
Lee, Y.-H., Kim, J., Noh, J., Lee, I., Kim, H. J., Choi, S., Seo, J., Jeon, S., Kim, T., Lee, J., et al. (2013) · Nano Letters · doi:10.1021/nl403860k · Cited by 430
Self-citation
A Miniature Biofuel Cell
Chen, T., Barton, S. C., Binyamin, G. N., Gao, Z., Zhang, Y., Kim, H.-H., & Heller, A. (2001) · Journal of the American Chemical Society · doi:10.1021/ja0163164 · Cited by 427
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. L. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 426
Inkjet‐Printed Quantum Dot–Polymer Composites for Full‐Color AC‐Driven Displays
Wood, V. C., Panzer, M. J., Chen, J., Bradley, M. S., Halpert, J. E., Bawendi, M. G., & Bulović, V. (2009) · Advanced Materials · doi:10.1002/adma.200803256 · Cited by 423
A review on self-healing coatings based on micro/nanocapsules
Samadzadeh, M., Boura, S. H., Peikari, M., Kasiriha, S. M., & Ashrafi, A. (2010) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2010.01.006 · Cited by 419
Ultraflexible In‐Plane Micro‐Supercapacitors by Direct Printing of Solution‐Processable Electrochemically Exfoliated Graphene
Liu, Z., Wu, Z., Yang, S., Dong⧫, R., Feng, X., & Müllen, K. (2016) · Advanced Materials · doi:10.1002/adma.201505304 · Cited by 412
Fully Printed, High Performance Carbon Nanotube Thin-Film Transistors on Flexible Substrates
Lau, P. H., Takei, K., Wang, C., Ju, Y., Kim, J., Yu, Z., Takahashi, T., Cho, G., & Javey, A. (2013) · Nano Letters · doi:10.1021/nl401934a · Cited by 411
Self-citation
The First Truly All‐Polymer Electrochromic Devices
Argun, A. A., Çırpan, A., & Reynolds, J. R. (2003) · Advanced Materials · doi:10.1002/adma.200305038 · Cited by 405
Flexible Solar Cells
Pagliaro, M., Ciriminna, R., & Palmisano, G. (2008) · ChemSusChem · doi:10.1002/cssc.200800127 · Cited by 399
Electrochemical biosensors based on nanomodified screen-printed electrodes: Recent applications in clinical analysis
Arduini, F., Micheli, L., Moscone, D., Palleschi, G., Piermarini, S., Ricci, F., & Volpe, G. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.01.032 · Cited by 396
From Wearable Sensors to Smart Implants-–Toward Pervasive and Personalized Healthcare
Andreu-Pérez, J., Leff, D. R., Ip, H. M. D., & Yang, G. (2015) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2015.2422751 · Cited by 393
Wearable Microsensor Array for Multiplexed Heavy Metal Monitoring of Body Fluids
Gao, W. F., Nyein, H. Y. Y., Shahpar, Z., Fahad, H. M., Chen, K., Emaminejad, S., Gao, Y., Tai, L., Ota, H., Wu, E. G., et al. (2016) · ACS Sensors · doi:10.1021/acssensors.6b00287 · Cited by 393
Electrochemical technologies for wastewater treatment and resource reclamation
Feng, Y., Yang, L., Liu, J., & Logan, B. E. (2016) · Environmental Science Water Research & Technology · doi:10.1039/c5ew00289c · Cited by 380
Integrated Enzyme‐Based Biofuel Cells–A Review
Willner, I., Yan, Y., Willner, B. I., & Tel‐Vered, R. (2009) · Fuel Cells · doi:10.1002/fuce.200800115 · Cited by 378
A 3-$\mu\hbox{W}$ CMOS Glucose Sensor for Wireless Contact-Lens Tear Glucose Monitoring
Liao, Y.-T., Yao, H., Lingley, A., Parviz, B., & Otis, B. P. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2170633 · Cited by 372
Transient Electronics: Materials and Devices
Fu, K. K., Wang, Z., Dai, J., Carter, M., & Hu, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04931 · Cited by 371
Gravure Printing of Graphene for Large‐area Flexible Electronics
Secor, E. B., Lim, S., Zhang, H., Frisbie, C. D., Francis, L. F., & Hersam, M. C. (2014) · Advanced Materials · doi:10.1002/adma.201401052 · Cited by 362
Highly Stretchable Fully-Printed CNT-Based Electrochemical Sensors and Biofuel Cells: Combining Intrinsic and Design-Induced Stretchability
Bandodkar, A. J., Jeerapan, I., You, J.-M., Nuñez-Flores, R., & Wang, J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04549 · Cited by 341
Self-citation
Freestanding Graphene Paper Supported Three-Dimensional Porous Graphene–Polyaniline Nanocomposite Synthesized by Inkjet Printing and in Flexible All-Solid-State Supercapacitor
Chi, K., Zhang, Z., Xi, J., Huang, Y., Xiao, F., Wang, S., & Liu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504539k · Cited by 337
Epidermal Biofuel Cells: Energy Harvesting from Human Perspiration
Jia, W., Valdés‐Ramírez, G., Bandodkar, A. J., Windmiller, J. R., & Wang, J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302922 · Cited by 324
Self-citation
Graphene As Transparent Conducting Electrodes in Organic Photovoltaics: Studies in Graphene Morphology, Hole Transporting Layers, and Counter Electrodes
Park, H., Brown, P. R., Bulović, V., & Kong, J. (2011) · Nano Letters · doi:10.1021/nl2029859 · Cited by 319
Cationic surfactant mediated exfoliation of graphite into graphene flakes
Vadukumpully, S., Paul, J., & Valiyaveettil, S. (2009) · Carbon · doi:10.1016/j.carbon.2009.07.049 · Cited by 310
Advances in wearable chemical sensor design for monitoring biological fluids
Matzeu, G., Florea, L., & Diamond, D. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.01.077 · Cited by 307
Printed Graphene Circuits
Chen, J., Ishigami, M., Jang, C., Hines, D. R., Fuhrer, M. S., & Williams, E. D. (2007) · Advanced Materials · doi:10.1002/adma.200701059 · Cited by 299
Solvent-Promoted Self-Healing Epoxy Materials
Caruso, M. M., Delafuente, D. A., Ho, V., Sottos, N. R., Moore, J. S., & White, S. R. (2007) · Macromolecules · doi:10.1021/ma701992z · Cited by 299
Inkjet deposition of liquid-exfoliated graphene and MoS 2 nanosheets for printed device applications
Finn, D. J., Lotya, M., Cunningham, G., Smith, R. J., McCloskey, D. M., Donegan, J. F., & Coleman, J. N. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc31993h · Cited by 293
Graphene-stabilized copper nanoparticles as an air-stable substitute for silver and gold in low-cost ink-jet printable electronics
Luechinger, N. A., Athanassiou, E. K., & Stark, W. J. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/44/445201 · Cited by 290
3D‐Printed Artificial Microfish
Zhu, W. Z., Li, J., Leong, Y. J., Rozen, I., Qu, X., Dong, R., Wu, Z., Gao, W. F., Chung, P. H., Wang, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501372 · Cited by 288
Self-citation
Carbon nanotube screen-printed electrochemical sensors
Wang, J., & Musameh, M. M. (2004) · The Analyst · doi:10.1039/b313431h · Cited by 276
Self-citation
Nanomaterial-based biosensors for environmental and biological monitoring of organophosphorus pesticides and nerve agents
Zhang, W., Asiri, A. M., Liu, D., Du, D., & Lin, Y. (2013) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2013.10.007 · Cited by 272
A Textile‐Based Stretchable Multi‐Ion Potentiometric Sensor
Parrilla, M., Cánovas, R., Jeerapan, I., Andrade, F. J., & Wang, J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600092 · Cited by 269
Self-citation
Highly sensitive electronic whiskers based on patterned carbon nanotube and silver nanoparticle composite films
Takei, K., Yu, Z., Zheng, M., Ota, H., Takahashi, T., & Javey, A. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1317920111 · Cited by 263
Continuous Self‐Healing Life Cycle in Vascularized Structural Composites
Patrick, J. F., Hart, K. R., Krull, B. P., Diesendruck, C. E., Moore, J. S., White, S. R., & Sottos, N. R. (2014) · Advanced Materials · doi:10.1002/adma.201400248 · Cited by 262
Polymer solar cells based on inkjet-printed PEDOT:PSS layer
Eom, S. H., Senthilarasu, S., Uthirakumar, P., Yoon, S. C., Lim, J., Lee, C., Lim, H. S., Lee, J., & Lee, S. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.01.015 · Cited by 258
Screen‐Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks
Xu, Y., Schwab, M. G., Strudwick, A. J., Hennig, I., Feng, X., Wu, Z., & Müllen, K. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300184 · Cited by 252
Introduction to Printed Electronics
Suganuma, K. (2014) · Springer briefs in electrical and computer engineering · doi:10.1007/978-1-4614-9625-0 · Cited by 247
Wearable temporary tattoo sensor for real-time trace metal monitoring in human sweat
Kim, J., de Araujo, W. R., Samek, I. A., Bandodkar, A. J., Jia, W., Brunetti, B., Paixão, T. R. L. C., & Wang, J. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.11.024 · Cited by 245
Self-citation
All‐Printed Flexible Organic Transistors Enabled by Surface Tension‐Guided Blade Coating
Pierre, A., Sadeghi, M., Payne, M. M., Facchetti, A. F., Anthony, J. E., & Arias, A. C. (2014) · Advanced Materials · doi:10.1002/adma.201401520 · Cited by 234
High-performance flexible energy storage and harvesting system for wearable electronics
Ostfeld, A. E., Gaikwad, A. M., Khan, Y., & Arias, A. C. (2016) · Scientific Reports · doi:10.1038/srep26122 · Cited by 234
Development of electrochemical immunosensors towards point of care diagnostics
Wan, Y., Su, Y. L., Zhu, X., Liu, G., & Fan, C. (2013) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.02.045 · Cited by 232
The role of electrochemistry and electrochemical technology in environmental protection
Janssen, L. M. C. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(01)00218-2 · Cited by 230
Improved Dispersion of Carbon Nanotubes in Polymers at High Concentrations
Liu, C.-X., & Choi, J. (2012) · Nanomaterials · doi:10.3390/nano2040329 · Cited by 217
Screen Printing as a Scalable and Low-Cost Approach for Rigid and Flexible Thin-Film Transistors Using Separated Carbon Nanotubes
Cao, X., Chen, H., Gu, X., Liu, B., Wang, W., Cao, Y. K., Wu, F., & Zhou, C. (2014) · ACS Nano · doi:10.1021/nn505979j · Cited by 217
Inkjet-printed energy storage device using graphene/polyaniline inks
Xu, Y., Hennig, I., Freyberg, D., Strudwick, A. J., Schwab, M. G., Weitz, R. T., & Cha, K. C.-P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.096 · Cited by 214
Regeneration after acute tubular necrosis
Toback, F. G. (1992) · Kidney International · doi:10.1038/ki.1992.32 · Cited by 214
Wearable electronics self-powered by using human body heat: The state of the art and the perspective
Leonov, V. N., & Vullers, R. J. M. (2009) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.3255465 · Cited by 214
A High Areal Capacity Flexible Lithium‐Ion Battery with a Strain‐Compliant Design
Gaikwad, A. M., Khau, B. V., Davies, G., Hertzberg, B. J., Steingart, D. A., & Arias, A. C. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201401389 · Cited by 212
Printable Solid-State Lithium-Ion Batteries: A New Route toward Shape-Conformable Power Sources with Aesthetic Versatility for Flexible Electronics
Kim, S. H., Choi, K.-H., Cho, S., Choi, S., Park, S., & Lee, S. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01394 · Cited by 210
A novel electrochemical sensor of bisphenol A based on stacked graphene nanofibers/gold nanoparticles composite modified glassy carbon electrode
Niu, X., Yang, W., Wang, G., Ren, J., Guo, H. C., & Gao, J. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.064 · Cited by 203
All‐Printed Stretchable Electrochemical Devices
Bandodkar, A. J., Nuñez‐Flores, R., Jia, W., & Wang, J. (2015) · Advanced Materials · doi:10.1002/adma.201500768 · Cited by 200
Self-citation
A low-cost paper-based inkjet-printed platform for electrochemical analyses
Määttänen, A., Mattinen, U., Ihalainen, P., Pulkkinen, P. M. S., Tenhu, H. J., Bobacka, J., & Peltonen, J. P. K. (2012) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2012.10.113 · Cited by 197
Fabrication of polypyrrole (PPy)/carbon nanotube (CNT) composite electrode on ceramic fabric for supercapacitor applications
Lee, H., Kim, H., Cho, M. S., Choi, J., & Lee, Y. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.06.113 · Cited by 197
Direct patterning of organic conductors on knitted textiles for long-term electrocardiography
Takamatsu, S., Lonjaret, T., Crisp, D. N., Badier, J., Malliaras, G. G., & Ismailova, E. (2015) · Scientific Reports · doi:10.1038/srep15003 · Cited by 195
Highly Stretchable and Conductive Polymer Material Made from Poly(3,4‐ethylenedioxythiophene) and Polyurethane Elastomers
Hansen, T., West, K., Hassager, O., & Larsen, N. B. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200601243 · Cited by 194
Wearable Biofuel Cells: A Review
Bandodkar, A. J., & Wang, J. (2016) · Electroanalysis · doi:10.1002/elan.201600019 · Cited by 193
Self-citation
Highly Conductive, Flexible, Polyurethane‐Based Adhesives for Flexible and Printed Electronics
Li, Z., Zhang, R., Moon, K., Liu, Y., Hansen, K., Le, T., & Wong, C. P. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201202249 · Cited by 191
Wearable Sensor Systems for Infants
Zhu, Z., Liu, T., Li, G., Li, T., & INOUE, Y. (2015) · Sensors · doi:10.3390/s150203721 · Cited by 189
Polymer solar cells based on inkjet-printed PEDOT:PSS layer
이수형, 이연식, 엄승훈, & 박한옥 (2009) · 한국에너지학회 학술발표회 · Cited by 189
Solution‐phase exfoliation of graphite for ultrafast photonics
Hasan, T., Torrisi, F., Sun, Z., Popa, D., Nicolosi, V., Privitera, G., Bonaccorso, F., & Ferrari, A. C. (2010) · physica status solidi (b) · doi:10.1002/pssb.201000339 · Cited by 187
Extraordinarily High Conductivity of Stretchable Fibers of Polyurethane and Silver Nanoflowers
Ma, R., Kang, B., Cho, S., Choi, M., & Baik, S. (2015) · ACS Nano · doi:10.1021/acsnano.5b03864 · Cited by 186
Wearable textile biofuel cells for powering electronics
Jia, W., Wang, X., Imani, S., Bandodkar, A. J., Ramírez, J., Mercier, P. P., & Wang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04796f · Cited by 184
Self-citation
A contact lens with integrated telecommunication circuit and sensors for wireless and continuous tear glucose monitoring
Yao, H., Liao, Y., Lingley, A. R., Afanasiev, A., Lähdesmäki, I., Otis, B. P., & Parviz, B. A. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/7/075007 · Cited by 182
Optical monitoring of sweat pH by a textile fabric wearable sensor based on covalently bonded litmus-3-glycidoxypropyltrimethoxysilane coating
Caldara, M., Colleoni, C., Guido, E., Re, V., & Rosace, G. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.08.073 · Cited by 181
Biomimetic Soft Multifunctional Miniature Aquabots
Kwon, G. H., Park, J. Y., Kim, J., Frisk, M. L., Beebe, D. J., & Lee, S. (2008) · Small · doi:10.1002/smll.200800315 · Cited by 180
Self-citation
Emulsifier‐Free Graphene Dispersions with High Graphene Content for Printed Electronics and Freestanding Graphene Films
Tölle, F. J., Fabritius, M., & Mülhaupt, R. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102888 · Cited by 165
Toward the development of smart and low cost point-of-care biosensors based on screen printed electrodes
Ahmed, M. U., Hossain, M. M., Safavieh, M., Wong, Y. L., Rahman, I. A., Zourob, M. M., & Tamiya, E. (2015) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2014.992387 · Cited by 164
A wearable conductivity sensor for wireless real-time sweat monitoring
Liu, G.-Y., Ho, C., Slappey, N., Zhou, Z., Snelgrove, S. E., Brown, M., Grabinski, A. K., Guo, X., Chen, Y., Miller, K. C., et al. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.12.034 · Cited by 164
All-polymer capacitor fabricated with inkjet printing technique
Liu, Y., Cui, T., & Varahramyan, K. (2003) · Solid-State Electronics · doi:10.1016/s0038-1101(03)00082-0 · Cited by 162
High stretchable MWNTs/polyurethane conductive nanocomposites
Shang, S., Xue, W., & Tao, X. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10255a · Cited by 162
High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives
Eom, S. H., Park, H., Mujawar, S. H., Yoon, S. C., Kim, S., Na, S., Kang, S., Khim, D., Kim, D., & Lee, S. (2010) · Organic Electronics · doi:10.1016/j.orgel.2010.06.007 · Cited by 162
A Self‐healing Conductive Ink
Odom, S. A., Chayanupatkul, S., Blaiszik, B. J., Zhao, O., Jackson, A. C., Braun, P. V., Sottos, N. R., White, S. R., & Moore, J. S. (2012) · Advanced Materials · doi:10.1002/adma.201200196 · Cited by 159
Transparent conductive grids via direct writing of silver nanoparticle inks
Ahn, B. Y., Lorang, D. J., & Lewis, J. A. (2011) · Nanoscale · doi:10.1039/c1nr10048c · Cited by 154
‘SWEATCH’: A Wearable Platform for Harvesting and Analysing Sweat Sodium Content
Glennon, T., O’Quigley, C., McCaul, M. V., Matzeu, G., Beirne, S., Wallace, G. G., Stroiescu, F., O'Mahoney, N., White, P., & Diamond, D. (2016) · Electroanalysis · doi:10.1002/elan.201600106 · Cited by 154
Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application
Yeo, J., Kim, G., Hong, S., Kim, M. S., Kim, D., Lee, J., Lee, H., Kwon, J., Suh, Y. D., Kang, H. W., et al. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.012 · Cited by 151
An epidermal alkaline rechargeable Ag–Zn printable tattoo battery for wearable electronics
Berchmans, S., Bandodkar, A. J., Jia, W., Ramírez, J., Meng, Y. S., & Wang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03256j · Cited by 149
Self-citation
Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte
Ho, C. C., Evans, J. W., & Wright, P. K. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/10/104009 · Cited by 149
Ink-jet printed conducting polyaniline based flexible humidity sensor
Kulkarni, M. V., Apte, S. K., Naik, S. D., Ambekar, J. D., & Kale, B. B. (2012) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2012.12.046 · Cited by 147
Wearable Solar Cells by Stacking Textile Electrodes
Pan, S., Yang, Z., Chen, P., Deng, J., Li, H., & Peng, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402561 · Cited by 145
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Secor, E. B., & Hersam, M. C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502431r · Cited by 142
Inkjet Printing of Transparent, Electrically Conducting Single‐Walled Carbon‐Nanotube Composites
Small, W. R., & Panhuis, M. I. H. (2007) · Small · doi:10.1002/smll.200700110 · Cited by 141
Advances and Future Challenges in Printed Batteries
Sousa, R., Costa, C. M., & Lanceros-Méndez, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500657 · Cited by 140
Inkjet-printed silver conductors using silver nitrate ink and their electrical contacts with conducting polymers
Liu, Z., Su, Y. Z., & Varahramyan, K. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2004.11.077 · Cited by 139
Mechanically Stable Thermally Crosslinked Poly(acrylic acid)/Reduced Graphene Oxide Aerogels
Ha, H., Shanmuganathan, K., & Ellison, C. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00407 · Cited by 139
Directly patternable, highly conducting polymers for broad applications in organic electronics
Yoo, J. E., Lee, K. S., García, A. A., Tarver, J., Gomez, E. D., Baldwin, K., Sun, Y., Meng, H., Nguyen, T., & Loo, Y. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0913879107 · Cited by 137
Materials for Printable, Transparent, and Low‐Voltage Transistors
Sun, J., Zhang, B., & Katz, H. E. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001530 · Cited by 136
Tear Based Bioelectronics
Pankratov, D., González‐Arribas, E., Blum, Z., & Shleev, S. (2016) · Electroanalysis · doi:10.1002/elan.201501116 · Cited by 135
Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries
Delannoy, P.-E., Riou, B., Lestriez, B., Guyomard, D., Brousse, T., & Bideau, J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.164 · Cited by 131
Inkjet-printed polypyrrole thin films for vapour sensing
Mabrook, M. F., Pearson, C., & Petty, M. C. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.10.019 · Cited by 131
Nanomaterial-based electrochemical detection of explosives: a review of recent developments
O’Mahony, A., & Wang, J. (2013) · Analytical Methods · doi:10.1039/c3ay40636a · Cited by 131
Self-citation
Wearable electrochemical sensors for in situ analysis in marine environments
Malzahn, K., Windmiller, J. R., Valdés‐Ramírez, G., Schöning, M. J., & Wang, J. (2011) · The Analyst · doi:10.1039/c1an15193b · Cited by 129
Self-citation
Wearable Potentiometric Sensors Based on Commercial Carbon Fibres for Monitoring Sodium in Sweat
Parrilla, M., Ferré, J. F., Guinovart, T., & Andrade, F. J. (2016) · Electroanalysis · doi:10.1002/elan.201600070 · Cited by 126
Stretchable Figures of Merit in Deformable Electronics
Lipomi, D. J. (2015) · Advanced Materials · doi:10.1002/adma.201504196 · Cited by 125
Nanocomposites of poly(vinyl chloride) with carbon nanotubes (CNT)
Broza, G., Piszczek, K., Schulte, K., & Sterzyński, T. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.01.033 · Cited by 124
Fabrication of Highly Stretchable Conductors Based on 3D Printed Porous Poly(dimethylsiloxane) and Conductive Carbon Nanotubes/Graphene Network
Duan, S., Yang, K., Wang, Z., Chen, M., Zhang, L., Zhang, H., & Li, C. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10791 · Cited by 123
Inkjet printing of transparent and conductive patterns of single‐walled carbon nanotubes and PEDOT‐PSS composites
Mustonen, T., Kordás, K., Saukko, S., Tóth, G., Penttilä, J. S., Helistö, P., Seppä, H., & Jantunen, H. M. (2007) · physica status solidi (b) · doi:10.1002/pssb.200776186 · Cited by 112
System Architectures in Wearable Electrochemical Sensors
Steinberg, M. D., Kassal, P., & Steinberg, I. M. (2016) · Electroanalysis · doi:10.1002/elan.201600094 · Cited by 110
Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules
Benatto, G. A. D. R., Roth, B., Corazza, M., Søndergaard, R. R., Gevorgyan, S. A., Jørgensen, M., & Krebs, F. C. (2015) · Nanoscale · doi:10.1039/c5nr07426f · Cited by 104
Electrochemical characterization of the solvent-enhanced conductivity of poly(3,4-ethylenedioxythiophene) and its application in polymer solar cells
Huang, J. H., Kekuda, D., Chu, C., & Ho, K. (2009) · Journal of Materials Chemistry · doi:10.1039/b822729b · Cited by 101
Smart, stretchable and wearable supercapacitors: prospects and challenges
Zheng, Y., Yang, Y., Chen, S., & Yuan, Q. (2016) · CrystEngComm · doi:10.1039/c5ce02510a · Cited by 100
Recent development on preparation of ceramic inks in ink-jet printing
Pan, Z., Wang, Y., Huang, H., Ling, Z., Dai, Y., & Ke, S. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.06.124 · Cited by 99
Sprayable Elastic Conductors Based on Block Copolymer Silver Nanoparticle Composites
Vural, M., Behrens, A. M., Ayyub, O. B., Ayoub, J. J., & Kofinas, P. (2014) · ACS Nano · doi:10.1021/nn505306h · Cited by 94
A Stencil Printed, High Energy Density Silver Oxide Battery Using a Novel Photopolymerizable Poly(acrylic acid) Separator
Braam, K., & Subramanian, V. (2014) · Advanced Materials · doi:10.1002/adma.201404149 · Cited by 91
Analysis of electrically conductive silver ink on stretchable substrates under tensile load
Merilampi, S. L., Björninen, T., Haukka, V., Ruuskanen, P., Ukkonen, L., & Sydanheimo, L. T. (2010) · Microelectronics Reliability · doi:10.1016/j.microrel.2010.06.011 · Cited by 90
Direct Pen Writing of Adhesive Particle-Free Ultrahigh Silver Salt-Loaded Composite Ink for Stretchable Circuits
Hu, M., Cai, X., Guo, Q., Bian, B., Zhang, T., & Yang, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b05082 · Cited by 90
Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications
Tehrani, Z., Korochkina, T. V., Govindarajan, S., Thomas, D. J., O’Mahony, J., Kettle, J., Claypole, T. C., & Gethin, D. T. (2015) · Organic Electronics · doi:10.1016/j.orgel.2015.08.007 · Cited by 89
Flexible and high-performance paper-based biofuel cells using printed porous carbon electrodes
Shitanda, I., Kato, S., Hoshi, Y., Itagaki, M., & Tsujimura, S. (2013) · Chemical Communications · doi:10.1039/c3cc46644b · Cited by 82
Graphene nanosheets as ink particles for inkjet printing on flexible board
Lee, C., Chen, C., & Chen, C.-W. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.093 · Cited by 78
Toward wearable patch for sweat analysis
Dam, V. A. T., Zevenbergen, M. A. G., & van Schaijk, R. T. F. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.01.143 · Cited by 78
Inkjet Printed Negative Supercapacitors: Synthesis of Polyaniline‐Based Inks, Doping Agent Effect, and Advanced Electronic Devices Applications
Chiolerio, A., Bocchini, S., & Porro, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303371 · Cited by 77
Flexible Rolled Thick‐Film Miniaturized Flow‐Cell for Minimally Invasive Amperometric Sensing
Kagie, A., Bishop, D. K., Burdick, J., Belle, J. T. L., Dymond, R., Felder, R. A., & Wang, J. (2008) · Electroanalysis · doi:10.1002/elan.200804253 · Cited by 77
Self-citation
Crosslinking Using Rapid Thermal Processing for the Fabrication of Efficient Solution‐Processed Phosphorescent Organic Light‐Emitting Diodes
Zuniga, C. A., Abdallah, J., Haske, W., Zhang, Y., Coropceanu, I., Barlow, S. H., Kippelen, B. J., & Marder, S. R. (2013) · Advanced Materials · doi:10.1002/adma.201204518 · Cited by 76
Nanosized Glass Frit as an Adhesion Promoter for Ink‐Jet Printed Conductive Patterns on Glass Substrates Annealed at High Temperatures
Jang, D., Kim, D., Lee, B., Kim, S., Kang, M., Min, D., & Moon, J. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800238 · Cited by 74
Low cost and highly conductive elastic composites for flexible and printable electronics
Hu, Y., Zhao, T., Zhu, P., Zhu, Y., Shuai, X., Liang, X., Sun, R., Lu, D. D., & Wong, C. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc01340f · Cited by 74
Flexible electroluminescent device with inkjet-printed carbon nanotube electrodes
Azoubel, S., Shemesh, S., & Magdassi, S. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/34/344003 · Cited by 68

Flagged first, then by citations

Research works printed but not linked: 4

Ahmed M. U., 2015, Crit. Rev. Biotechnol., 36, 495
Choi K.‐H., 2016, Energy Environ. Sci.
Wang Q., 2016, Environ. Sci., 9, 729
Selvam A. P., 2016, Sci. Rep., 6

Sorted by citations

Wearable biosensors for healthcare monitoring
Kim, J., Campbell, A. S., de Ávila, B. E.-F., & Wang, J. (2019) · Nature Biotechnology · doi:10.1038/s41587-019-0045-y · Cited by 3,373
Self-citation
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Self-citation
Advanced Carbon for Flexible and Wearable Electronics
Wang, C., Xia, K., Wang, H., Liang, X., Yin, Z., & Zhang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201801072 · Cited by 1,312
Enzyme‐Based Glucose Sensor: From Invasive to Wearable Device
Lee, H., Hong, Y. J., Baik, S., Hyeon, T., & Kim, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701150 · Cited by 778
Skin-Interfaced Wearable Sweat Sensors for Precision Medicine
Min, J., Tu, J., Xu, C., Lukas, H., Shin, S., Yang, Y., Solomon, S. A., Mukasa, D., & Gao, W. F. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00823 · Cited by 752

See all 453

Authors: Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J.
Affiliations: University of California San Diego (US)
Corresponding author: Wang, Joseph
ORCID: Kim, Jayoung
Kumar, Rajan
Bandodkar, Amay J.
Wang, Joseph
Venue: Advanced Electronic Materials
Publisher: Wiley
Published: 2016-12-07
Volume: 3
Issue: 1
ISSN: 2199-160X (ISSN-L)
DOI: 10.1002/aelm.201600260
OpenAlex: W2560773225
Cited by: 452
References: 237
Citations by year: 2026: 14 · 2025: 30 · 2024: 34 · 2023: 32 · 2022: 60 · 2021: 72 · 2020: 78 · 2019: 65 · 2018: 47 · 2017: 19
FWCI: 2.16
Type: journal article
Language: en
Open access: closed
Licence: onlinelibrary.wiley.com/termsAndConditions#am (am, 365 d)
onlinelibrary.wiley.com/termsAndConditions#vor (vor)
Locations: Advanced Electronic Materials (publishedVersion)
Funders: National Institutes of Health (R21EB019698)
Defense Threat Reduction Agency (HDTRA1‐16‐1‐0013)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
Keywords: stretchable electronics, self-healing materials, printed batteries, printed supercapacitors, printed sensors, nanomaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks