Cited by 453Nanomaterials and Printing TechnologiesAdvanced Sensor and Energy Harvesting MaterialsConducting polymers and applications

The DOI matches its Crossref record; 237 of the 237 references it cites were found in a registry or an index.

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

Kim, Jayoung, Kumar, Rajan, Bandodkar, Amay J., Wang, Joseph·2017·Advanced Electronic Materials

DOI 10.1002/aelm.201600260

Open this paper in CoChat — free account

Abstract

The field of printed wearable electronics has witnessed spectacular growth due to its promise to offer low‐cost, high‐performance devices for a broad range of applications. Among the sub‐fields of printed wearable electronics, printed wearable electrochemical systems are of special importance due to their widespread applications in healthcare, energy and security fields. These systems have opened up new avenues for body‐integrated electronics that were earlier impossible to achieve. These include wearable energy systems and sensors for a wide variety of applications. Much of the success of printed wearable electrochemical systems can be attributed to innovations in materials engineering that have led to novel inks comprising of new nanomaterials, polymers and composites. New generation of printed electrochemical devices include soft, stretchable and anatomically‐compliant devices that enable efficient bio‐integration and withstand high tensile stress associated with on‐body applications. Progress in materials science has also led to the development of self‐healing printed electrochemical systems for wearable applications. This review provides an overview of the key material requirements for ink formulations for realizing efficient wearable electrochemical systems such as batteries, supercapacitors, biofuel cells and sensors. Finally, major challenges impeding the field of wearable electrochemical systems are discussed along with future prospects of this exciting field.

Integrity signals

Registry

Crossref · 10.1002/aelm.201600260

Cites

237 of 237 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. G. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,636
Large-scale pattern growth of graphene films for stretchable transparent electrodes
Kim, K., Zhao, Y., Jang, H., Lee, S., Kim, J. M., Kim, K. S., Ahn, J., Kim, P., Choi, J., & Hong, B. H. (2009) · Nature · doi:10.1038/nature07719 · Cited by 10,530
Self-citation
The Li-ion rechargeable battery: a perspective.
Goodenough, J., & Park, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 8,764
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Kim, H. R., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,238
Microbial Fuel Cells: Methodology and Technology
Logan, B. E., Hamelers, H. V. M., Rozendal, R. A., Schröder, U., Keller, J., Freguia, S., Aelterman, P., Verstraete, W., & Rabaey, K. (2006) · Environmental Science & Technology · doi:10.1021/es0605016 · Cited by 6,095
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Gao, W., Emaminejad, S., Nyein, H. Y. Y., Challa, S., Chen, K., Peck, A., Fahad, H. M., Ota, H., Shiraki, H., Kiriya, D., et al. (2016) · Nature · doi:10.1038/nature16521 · Cited by 5,087
Wound Healing--Aiming for Perfect Skin Regeneration
Martin, P. B. (1997) · Science · doi:10.1126/science.276.5309.75 · Cited by 4,842
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S., Zu, C., & Su, Y. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,710
Autonomic healing of polymer composites
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., & Viswanathan, S. (2001) · Nature · doi:10.1038/35057232 · Cited by 4,575
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2007) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,501

Flagged first, then by citations

Show all 237 references

Research works printed but not linked: 4

Ahmed M. U., 2015, Crit. Rev. Biotechnol., 36, 495
Choi K.‐H., 2016, Energy Environ. Sci.
Wang Q., 2016, Environ. Sci., 9, 729
Selvam A. P., 2016, Sci. Rep., 6

Sorted by citations

Wearable biosensors for healthcare monitoring
Kim, J., Campbell, A. S., de Ávila, B. E.-F., & Wang, J. (2019) · Nature Biotechnology · doi:10.1038/s41587-019-0045-y · Cited by 3,373
Self-citation
Bio-Integrated Wearable Systems: A Comprehensive Review
Ray, T. R., Choi, J., Bandodkar, A. J., Krishnan, S., Gutruf, P., Tian, L., Ghaffari, R., & Rogers, J. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00573 · Cited by 1,350
Self-citation
Advanced Carbon for Flexible and Wearable Electronics
Wang, C., Xia, K., Wang, H., Liang, X., Yin, Z., & Zhang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201801072 · Cited by 1,312
Enzyme‐Based Glucose Sensor: From Invasive to Wearable Device
Lee, H., Hong, Y. J., Baik, S., Hyeon, T., & Kim, D. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701150 · Cited by 778
Skin-Interfaced Wearable Sweat Sensors for Precision Medicine
Min, J., Tu, J., Xu, C., Lukas, H., Shin, S., Yang, Y., Solomon, S. A., Mukasa, D., & Gao, W. F. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00823 · Cited by 752
A wireless body area sensor network based on stretchable passive tags
Niu, S., Matsuhisa, N., Beker, L., Li, J., Wang, S., Wang, J., Jiang, Y., Yan, X., Yun, Y., Burnett, W., et al. (2019) · Nature Electronics · doi:10.1038/s41928-019-0286-2 · Cited by 601
Self-citation
Integrated textile sensor patch for real-time and multiplex sweat analysis
He, W., Wang, C., Wang, H., Jian, M., Lu, W., Liang, X., Zhang, X., Yang, F., & Zhang, Y. (2019) · Science Advances · doi:10.1126/sciadv.aax0649 · Cited by 564
Emerging Technologies of Flexible Pressure Sensors: Materials, Modeling, Devices, and Manufacturing
Huang, Y., Fan, X., Chen, S., & Zhao, N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808509 · Cited by 543
Tackling the Challenges of Enzymatic (Bio)Fuel Cells
Xiao, X., Xia, H.-Q., Wu, R., Bai, L., Yan, L., Magner, E., Cosnier, S., Lojou, É., Zhu, Z., & Liu, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00115 · Cited by 520
Flexible/Stretchable Supercapacitors with Novel Functionality for Wearable Electronics
Keum, K., Kim, J. W., Hong, S. Y., Son, J. G., Lee, S., & Ha, J. S. (2020) · Advanced Materials · doi:10.1002/adma.202002180 · Cited by 494
Self-citation
Recent advances in solid-contact ion-selective electrodes: functional materials, transduction mechanisms, and development trends
Shao, Y., Ying, Y. B., & Ping, J. F. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00587k · Cited by 490
A critical review on the use of potentiometric based biosensors for biomarkers detection
Karimi‐Maleh, H., Orooji, Y., Karimi, F., Alizadeh, M., Baghayeri, M., Rouhi, J., Tajik, S., Beitollahi, H., Agarwal, S., Gupta, V. K., et al. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113252 · Cited by 480
Disease Detection with Molecular Biomarkers: From Chemistry of Body Fluids to Nature-Inspired Chemical Sensors
Broza, Y. Y., Zhou, X., Yuan, M., Qu, D., Zheng, Y., Vishinkin, R., Khatib, M., Wu, W., & Haick, H. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00437 · Cited by 464
Wearable Electrochemical Sensors for the Monitoring and Screening of Drugs
Teymourian, H., Parrilla, M., Sempionatto, J. R., Montiel, N. F., Barfidokht, A., Echelpoel, R. V., Wael, K. D., & Wang, J. (2020) · ACS Sensors · doi:10.1021/acssensors.0c01318 · Cited by 437
Self-citation
Review of MXene electrochemical microsupercapacitors
Jiang, Q. M., Lei, Y., Liang, H., Xi, K., Xia, C., & Alshareef, H. N. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.01.018 · Cited by 403
Wearable Sensors for Biochemical Sweat Analysis
Bandodkar, A. J., Jeang, W. J., Ghaffari, R., & Rogers, J. A. (2019) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-061318-114910 · Cited by 387
Self-citation
Flexible, Stretchable Sensors for Wearable Health Monitoring: Sensing Mechanisms, Materials, Fabrication Strategies and Features
Liu, Y., Wang, H., Zhao, W., Zhang, M., Qin, H., & Xie, Y. (2018) · Sensors · doi:10.3390/s18020645 · Cited by 404
A rigid and healable polymer cross-linked by weak but abundant Zn(II)-carboxylate interactions
Lai, J., Li, L., Wang, D., Zhang, M., Mo, S.-R., Wang, X., Zeng, K.-Y., Li, C., Jiang, Q. Y., You, X., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05285-3 · Cited by 355
Weaving Sensing Fibers into Electrochemical Fabric for Real‐Time Health Monitoring
Wang, L., Wang, L., Zhang, Y., Pan, J., Li, S., Sun, X., Zhang, B., & Peng, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804456 · Cited by 353
O2Reduction in Enzymatic Biofuel Cells
Mano, N., & de Poulpiquet, A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00220 · Cited by 350
Wearable potentiometric ion sensors
Parrilla, M., Cuartero, M., & Crespo, G. A. (2018) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2018.11.024 · Cited by 339
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 331
Stable and Biocompatible Carbon Nanotube Ink Mediated by Silk Protein for Printed Electronics
Liang, X., Li, H., Dou, J., Wang, Q., He, W., Wang, C., Li, D., Lin, J., & Zhang, Y. (2020) · Advanced Materials · doi:10.1002/adma.202000165 · Cited by 325
3D Printing of Multilayered and Multimaterial Electronics: A Review
Goh, G. L., Zhang, H., Chong, T. H., & Yeong, W. Y. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202100445 · Cited by 325
Advanced strategies in electrode engineering and nanomaterial modifications for supercapacitor performance enhancement: A comprehensive review
Shah, S. S., Niaz, F., Ehsan, M. A., Das, H. T., Younas, M., Khan, A. S., Rahman, H. U., Nayem, S. M. A., Oyama, M., & Aziz, M. A. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110152 · Cited by 324
Fully Printed PEDOT:PSS-based Temperature Sensor with High Humidity Stability for Wireless Healthcare Monitoring
Wang, Y., Sekine, T., Takeda, Y., Yokosawa, K., Matsui, H., Kumaki, D., Shiba, T., Nishikawa, T., & Tokito, S. (2020) · Scientific Reports · doi:10.1038/s41598-020-59432-2 · Cited by 326
Emerging Self‐Emissive Technologies for Flexible Displays
Zhang, D., Huang, T., & Duan, L. (2019) · Advanced Materials · doi:10.1002/adma.201902391 · Cited by 318
Recent Progress on Zinc-Ion Rechargeable Batteries
Xu, W., & Wang, Y. (2019) · Nano-Micro Letters · doi:10.1007/s40820-019-0322-9 · Cited by 317
Bioinspired Composite Microfibers for Skin Adhesion and Signal Amplification of Wearable Sensors
Drotlef, D., Amjadi, M., Yunusa, M., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201701353 · Cited by 296
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Tang, X., Zhou, H., Cai, Z., Cheng, D., He, P., Xie, P., Zhang, D., & Fan, T. (2018) · ACS Nano · doi:10.1021/acsnano.8b00304 · Cited by 291
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 275
Recent Development of Printed Micro‐Supercapacitors: Printable Materials, Printing Technologies, and Perspectives
Li, H., & Liang, J. (2019) · Advanced Materials · doi:10.1002/adma.201805864 · Cited by 264
All‐Printed, Stretchable Zn‐Ag2O Rechargeable Battery via Hyperelastic Binder for Self‐Powering Wearable Electronics
Kumar, R., Shin, J., Yin, L., You, J., Meng, Y. S., & Wang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602096 · Cited by 261
Self-citation
Recent Developments in Printing Flexible and Wearable Sensing Electronics for Healthcare Applications
Khan, S., Ali, S., & Bermak, A. (2019) · Sensors · doi:10.3390/s19051230 · Cited by 259
Recent developments in conducting polymers: applications for electrochemistry
Tajik, S., Beitollahi, H., Nejad, F. G., Sheikhshoaie, I., Khalilzadeh, M. A., Asl, M. S., Le, Q. V., Zhang, K., Jang, H. W., & Shokouhimehr, M. (2020) · RSC Advances · doi:10.1039/d0ra06160c · Cited by 253
Metallosupramolecular Photonic Elastomers with Self‐Healing Capability and Angle‐Independent Color
Tan, H., Lyu, Q., Xie, Z., Li, M., Wang, K., Wang, K., Xiong, B., Zhang, L., & Zhu, J. (2018) · Advanced Materials · doi:10.1002/adma.201805496 · Cited by 236
All-printed nanomembrane wireless bioelectronics using a biocompatible solderable graphene for multimodal human-machine interfaces
Kwon, Y.-T., Kim, Y.-S., Kwon, S., Mahmood, M., Lim, H.-R., Park, S.-W., Kang, S.-O., Choi, J. J., Herbert, R., Jang, Y. C., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17288-0 · Cited by 233
Tunable Emissions of Upconversion Fluorescence for Security Applications
Yao, W., Tian, Q., & Wu, W. H. (2018) · Advanced Optical Materials · doi:10.1002/adom.201801171 · Cited by 231
A review on inkjet printing of CNT composites for smart applications
Eshkalak, S. K., Chinnappan, A., Jayathilaka, W. A. D. M., Khatibzadeh, M., Kowsari, E., & Ramakrishna, S. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.09.003 · Cited by 206
Recent progress in printed flexible solid-state supercapacitors for portable and wearable energy storage
Liu, L., Yu, F., & Wu, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.012 · Cited by 206
Inkjet printing for flexible and wearable electronics
Yan, K., Li, J., Pan, L., & Shi, Y. (2020) · APL Materials · doi:10.1063/5.0031669 · Cited by 208
Recent Advances in Wearable Transdermal Delivery Systems
Amjadi, M., Sheykhansari, S., Nelson, B. J., & Sitti, M. (2018) · Advanced Materials · doi:10.1002/adma.201704530 · Cited by 204
Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources
Choi, K.-H., Ahn, D. B., & Lee, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01086 · Cited by 180
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Zhang, Y., Shi, G., Qin, J., Lowe, S. E., Zhang, S., Zhao, H., & Zhong, Y. L. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00428 · Cited by 184
A Review of Printable Flexible and Stretchable Tactile Sensors
Kumar, K. S., Chen, P., & Ren, H. (2019) · Research · doi:10.34133/2019/3018568 · Cited by 183
Piezoelectric Materials for Controlling Electro-Chemical Processes
Qian, W., Yang, W., Zhang, Y., Bowen, C., & Yang, Y. F. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-00489-z · Cited by 183
Wearable electrochemical sensors for forensic and clinical applications
Ferreira, P. C., Ataide, V. N., Chagas, C. L. S., Angnes, L., Coltro, W. K. T., Paixão, T. R. L. C., & de Araujo, W. R. (2019) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2019.115622 · Cited by 171
Oxide rupture-induced conductivity in liquid metal nanoparticles by laser and thermal sintering
Liu, S., Reed, S. N., Higgins, M. J., Titus, M. S., & Kramer-Bottiglio, R. K. (2019) · Nanoscale · doi:10.1039/c9nr03903a · Cited by 161
Emerging challenges in the thermal management of cellulose nanofibril-based supercapacitors, lithium-ion batteries and solar cells: A review
Zhang, Y., Hao, N., Lin, X., & Nie, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115888 · Cited by 159
Wearable Potentiometric Ion Patch for On-Body Electrolyte Monitoring in Sweat: Toward a Validation Strategy to Ensure Physiological Relevance
Parrilla, M., Ortiz‐Gómez, I., Cánovas, R., Salinas‐Castillo, A., Cuartero, M., & Crespo, G. A. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b02126 · Cited by 158
Polymer Hydrogel Electrolytes for Flexible and Multifunctional Zinc‐Ion Batteries and Capacitors
Ma, R., Xu, Z., & Wang, X. (2022) · Energy & environment materials · doi:10.1002/eem2.12464 · Cited by 159
Wearable Self‐Powered Electrochemical Devices for Continuous Health Management
Parrilla, M., & Wael, K. D. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107042 · Cited by 158
Emerging miniaturized energy storage devices for microsystem applications: from design to integration
Liu, H., Zhang, G., Zheng, X. L., Chen, F., & Duan, H. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/abba12 · Cited by 156
Toward fiber-, paper-, and foam-based flexible solid-state supercapacitors: electrode materials and device designs
Liang, J., Jiang, C., & Wu, W. H. (2019) · Nanoscale · doi:10.1039/c8nr10301a · Cited by 152
Additive Manufacturing of Conducting Polymers: Recent Advances, Challenges, and Opportunities
Criado‐Gonzalez, M., Dominguez‐Alfaro, A., Lopez‐Larrea, N., Alegret, N., & Mecerreyes, D. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00252 · Cited by 149
Recent Advances in Electrospun Nanofiber Interfaces for Biosensing Devices
Sapountzi, E., Braiek, M., Châteaux, J.-F., Jaffrezic-Renault, N. J., & Lagarde, F. (2017) · Sensors · doi:10.3390/s17081887 · Cited by 146
2D Nanomaterial Arrays for Electronics and Optoelectronics
Gong, C., Hu, K., Wang, X., Wangyang, P., Yan, C., Chu, J., Liao, M., Dai, L., Zhai, T., Wang, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706559 · Cited by 146
3D Printed High‐Loading Lithium‐Sulfur Battery Toward Wearable Energy Storage
Chen, C., Jiang, J., He, W., Wu, L., Hao, Q., & Zhang, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909469 · Cited by 144
The potential of paper-based diagnostics to meet the ASSURED criteria
Smith, S., Korvink, J. G., Mager, D., & Land, K. J. (2018) · RSC Advances · doi:10.1039/c8ra06132g · Cited by 149
High Performance Printed AgO-Zn Rechargeable Battery for Flexible Electronics
Yin, L., Scharf, J., Ma, J., Doux, J., Redquest, C., Le, V. L., Yin, Y., Ortega, J., Wei, X., Wang, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.11.008 · Cited by 146
Self-citation
Highly Sensitive Biosensors Based on Biomolecules and Functional Nanomaterials Depending on the Types of Nanomaterials: A Perspective Review
Yoon, J., Shin, M., Lee, T., & Choi, J. (2020) · Materials · doi:10.3390/ma13020299 · Cited by 148
Flexible 2D Materials beyond Graphene: Synthesis, Properties, and Applications
Yu, W., Gong, K., Li, Y., Ding, B., Li, L., Xu, Y., Wang, R., Li, L., Zhang, G., & Lin, S. (2022) · Small · doi:10.1002/smll.202105383 · Cited by 141
Advances in Printed Electronic Textiles
Islam, M. R., Afroj, S., Yin, J., Novoselov, K. S., Chen, J., & Karim, N. (2023) · Advanced Science · doi:10.1002/advs.202304140 · Cited by 150
Three-Dimensional Printing of Cytocompatible, Thermally Conductive Hexagonal Boron Nitride Nanocomposites
Guiney, L. M., Mansukhani, N. D., Jakus, A. E., Wallace, S. G., Shah, R. N., & Hersam, M. C. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00555 · Cited by 137
A porous self-healing hydrogel with an island-bridge structure for strain and pressure sensors
Zhang, Y., Ren, E., Li, A., Cui, C., Guo, R., Tang, H., Xiao, H., Zhou, M., Qin, W., Wang, X., et al. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01926g · Cited by 137
Advances in Sweat Wearables: Sample Extraction, Real-Time Biosensing, and Flexible Platforms
Qiao, L., Benzigar, M. R., Subramony, J. A., Lovell, N. H., & Liu, G. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07614 · Cited by 140
Highly sensitive and stretchable strain sensors based on serpentine-shaped composite films for flexible electronic skin applications
Zhou, J., Guo, X., Xu, Z., Wu, Q., Chen, J., Wu, J., Dai, Y., Qu, L., & Huang, Z. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108215 · Cited by 133
Stretchable sensors for environmental monitoring
Yang, Y., & Deng, Z. D. (2019) · Applied Physics Reviews · doi:10.1063/1.5085013 · Cited by 132
Recent advances in printed flexible heaters for portable and wearable thermal management
Liu, Q., Tian, B., Liang, J., & Wu, W. H. (2021) · Materials Horizons · doi:10.1039/d0mh01950j · Cited by 131
High-Performance Screen-Printed Thermoelectric Films on Fabrics
Shin, S., Kumar, R., Roh, J. W., Ko, D., Kim, H., Kim, S. I., Yin, L., Schlossberg, S. M., Cui, S., You, J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-07654-2 · Cited by 131
Self-citation
3D printing of reduced graphene oxide aerogels for energy storage devices: A paradigm from materials and technologies to applications
Guo, B., Liang, G., Yu, S., Wang, Y., Zhi, C., & Bai, J. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.04.021 · Cited by 129
Polymer Electrolytes for High Energy Density Ternary Cathode Material-Based Lithium Batteries
Zhang, H., Zhang, J., Ma, J., Xu, G. J., Dong, T., & Cui, G. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-00027-x · Cited by 127
All-printed, interdigitated, freestanding serpentine interconnects based flexible solid state supercapacitor for self powered wearable electronics
Rajendran, V., Mohan, A. M. V., Mathiyarasu, J., & Nakagawa, T. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104055 · Cited by 130
Polycarbazole and Its Derivatives: Synthesis and Applications. A Review of the Last 10 Years
Bekkar, F., Bettahar, F., Moreno, I., Méghabar, R., Hamadouche, M., Hernáez, E., Vilas‐Vilela, J. L., & Ruiz‐Rubio, L. (2020) · Polymers · doi:10.3390/polym12102227 · Cited by 124
Flexible and Wearable Power Sources for Next‐Generation Wearable Electronics
Fan, X., Liu, B., Ding, J., Deng, Y., Han, X., Hu, W., & Zhong, C. M. (2020) · Batteries & Supercaps · doi:10.1002/batt.202000115 · Cited by 115
Progress and opportunities in additive manufacturing of electrically conductive polymer composites
Yan, Y., Jiang, Y., Ng, E. L. L., Zhang, Y., Owh, C., Wang, F., Song, Q., Feng, T., Zhang, B., Li, P., et al. (2022) · Materials Today Advances · doi:10.1016/j.mtadv.2022.100333 · Cited by 114
High Performance Printed AgO-Zn Rechargeable Battery for Flexible Electronics
Yin, L., Scharf, J., Ma, J., Doux, J., Redquest, C., Le, V. L., Yin, Y., Ortega, J., Wei, X., Wang, J., et al. (2021) · eScholarship (California Digital Library) · Cited by 110
Self-citation
A Wearable Paper‐Based Sweat Sensor for Human Perspiration Monitoring
Parrilla, M., Guinovart, T., Ferré, J. F., Blondeau, P., & Andrade, F. J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900342 · Cited by 114
Fully printed and multifunctional graphene-based wearable e-textiles for personalized healthcare applications
Islam, M. R., Afroj, S., Beach, C., Islam, M. H., Parraman, C. E., Abdelkader, A. M., Casson, A. J., Novoselov, K. S., & Karim, N. (2022) · iScience · doi:10.1016/j.isci.2022.103945 · Cited by 112
Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies
Zhang, J., Zeidabadi, M. A., Fargas, G., Peřinka, N., Reguera, J., Lanceros-Méndez, S., Llanes, L., & Jiménez‐Piqué, E. (2022) · Metals · doi:10.3390/met12020234 · Cited by 115
All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics
Tian, B., Yao, W., Zeng, P., Li, X., Wang, H. J., Liu, L., Yu, F., Luo, C., & Wu, W. H. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc04753g · Cited by 107
Dynamic Photomask‐Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator
Chen, K., Zhang, L., Kuang, X., Li, V., Lei, M., Kang, G., Wang, Z. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903568 · Cited by 107
Structural Innovations in Printed, Flexible, and Stretchable Electronics
Yin, L., Lv, J., & Wang, J. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000694 · Cited by 109
Self-citation
Flexible Wearable Sensors in Medical Monitoring
Yuan, Y., Лю, Б., Li, H., Li, M., Song, Y., Wang, R., Wang, T., & Zhang, H. (2022) · Biosensors · doi:10.3390/bios12121069 · Cited by 114
Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review
Lu, X., Jayakumar, K., Wen, Y., Najafabadi, A. H., Duan, X., & Xu, J. (2023) · Microchimica Acta · doi:10.1007/s00604-023-06121-2 · Cited by 105
Respiratory Monitoring: Current State of the Art and Future Roads
Costanzo, I., Sen, D., Rhein, L., & Güler, Ü. (2020) · IEEE Reviews in Biomedical Engineering · doi:10.1109/rbme.2020.3036330 · Cited by 103
Mechanically Durable and Flexible Thermoelectric Films from PEDOT:PSS/PVA/Bi0.5Sb1.5Te3 Nanocomposites
Zhang, T., Li, K., Li, C. C., Ma, S., Hng, H. H., & Wei, L. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600554 · Cited by 103
Screen-Printed Electrodes: Promising Paper and Wearable Transducers for (Bio)Sensing
Yáñez‐Sedeño, P., Campuzano, S., & Pingarrón, J. M. (2020) · Biosensors · doi:10.3390/bios10070076 · Cited by 103
Near-Field Communication Sensors
Cao, Z., Chen, P., Ma, Z., Li, S., Gao, X., Wu, R., Pan, L., & Shi, Y. (2019) · Sensors · doi:10.3390/s19183947 · Cited by 106
Future Trend in Wearable Electronics in the Textile Industry
Kan, C. W., & Lam, Y.-L. (2021) · Applied Sciences · doi:10.3390/app11093914 · Cited by 106
Printed flexible supercapacitor: Ink formulation, printable electrode materials and applications
Liang, J., Jiang, C., & Wu, W. H. (2021) · Applied Physics Reviews · doi:10.1063/5.0048446 · Cited by 100
Printable elastomeric electrodes with sweat-enhanced conductivity for wearables
Lv, J., Thangavel, G., Li, Y., Xiong, J., Gao, D., Ciou, J., Tan, M., Aziz, I., Chen, S., Chen, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg8433 · Cited by 95
Fabrication of Multifunctional Electronic Textiles Using Oxidative Restructuring of Copper into a Cu-Based Metal–Organic Framework
Eagleton, A. M., Ko, M., Stolz, R. M., Vereshchuk, N., Meng, Z., Mendecki, L., Levenson, A. M., Huang, C. Y., MacVeagh, K. C., Mahdavi‐Shakib, A., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c05510 · Cited by 96
Recent Advances in Gas Detection Methodologies with a Special Focus on Environmental Sensing and Health Monitoring Applications─A Critical Review
Banga, I. K., Paul, A., Poudyal, D. C., Muthukumar, S., & Prasad, S. (2023) · ACS Sensors · doi:10.1021/acssensors.3c00959 · Cited by 96
Near-Infrared Light and Solar Light Activated Self-Healing Epoxy Coating having Enhanced Properties Using MXene Flakes as Multifunctional Fillers
Zou, Y., Fang, L., Chen, T., Sun, M., Lu, C., & Xu, Z. (2018) · Polymers · doi:10.3390/polym10050474 · Cited by 95
Direct Ink Writing 3D Printing for High‐Performance Electrochemical Energy Storage Devices: A Minireview
Zeng, L., Ling, S., Du, D., He, H., Li, X., & Zhang, C. (2023) · Advanced Science · doi:10.1002/advs.202303716 · Cited by 94
A Self‐Healing Flexible Quasi‐Solid Zinc‐Ion Battery Using All‐In‐One Electrodes
Liu, J., Long, J., Shen, Z., Jin, X., Han, T., Si, T., & Zhang, H. (2021) · Advanced Science · doi:10.1002/advs.202004689 · Cited by 93
Printed Thermoelectrics
Burton, M., Howells, G., Atoyo, J., & Carnie, M. J. (2022) · Advanced Materials · doi:10.1002/adma.202108183 · Cited by 92
High-Performance Ag–Se-Based n-Type Printed Thermoelectric Materials for High Power Density Folded Generators
Mallick, M. M., Rösch, A. G., Franke, L., Ahmed, S., Gall, A., Geßwein, H., Aghassi‐Hagmann, J., & Lemmer, U. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01676 · Cited by 92
Inkjet Printing: A Viable Technology for Biosensor Fabrication
Hussain, A., Abbas, N., & Ali, A. (2022) · Chemosensors · doi:10.3390/chemosensors10030103 · Cited by 94

Authors: Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J.
Affiliations: University of California San Diego (US)
Corresponding author: Wang, Joseph
ORCID: Kim, Jayoung
Kumar, Rajan
Bandodkar, Amay J.
Wang, Joseph
Venue: Advanced Electronic Materials
Publisher: Wiley
Published: 2016-12-07
Volume: 3
Issue: 1
ISSN: 2199-160X (ISSN-L)
DOI: 10.1002/aelm.201600260
OpenAlex: W2560773225
Cited by: 452
References: 237
Citations by year: 2026: 14 · 2025: 30 · 2024: 34 · 2023: 32 · 2022: 60 · 2021: 72 · 2020: 78 · 2019: 65 · 2018: 47 · 2017: 19
FWCI: 2.16
Type: journal article
Language: en
Open access: closed
Licence: onlinelibrary.wiley.com/termsAndConditions#am (am, 365 d)
onlinelibrary.wiley.com/termsAndConditions#vor (vor)
Locations: Advanced Electronic Materials (publishedVersion)
Funders: National Institutes of Health (R21EB019698)
Defense Threat Reduction Agency (HDTRA1‐16‐1‐0013)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Nanomaterials and Printing Technologies
Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
Physical Sciences › Materials Science › Polymers and Plastics › Conducting polymers and applications
Keywords: stretchable electronics, self-healing materials, printed batteries, printed supercapacitors, printed sensors, nanomaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Advanced Materials for Printed Wearable Electrochemical Devices: A Review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks