The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Abstract
The ever‐increasing demand for high‐performing, economical, and safe power storage for portable electronics and electric vehicles stimulates R&D in the field of chemical power sources. In the past two decades, lithium‐ion technology has proven itself a most robust technology, which delivers high energy and power capabilities. At the same time, current technology requires that the energy and power capabilities of Li‐ion batteries be ‘beefed up’ beyond the existing state of the art. Increasing the battery voltage is one of the ways to improve battery energy density; in Li‐ion cells, the objective of current research is to develop a 5‐volt cell, and at the same time to maintain high specific charge capacity, excellent cycling, and safety. Since current anode materials possess working potentials fairly close to the potential of a lithium metal, the focus is on the development of cathode materials. This work reviews and analyzes the current state of the art, achievements, and challenges in the field of high‐voltage cathode materials for Li‐ion cells. Some suggestions regarding possible approaches for future development in the field are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Cited by
A Novel Aluminum–Graphite Dual‐Ion Battery
Zhang, X., Tang, Y., Zhang, F., & Lee, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502588 · Cited by 1,604
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
A review of rechargeable batteries for portable electronic devices
Liang, Y., Zhao, C., Yuan, H., Chen, Y., Zhang, W., Huang, J., Yu, D., Liu, Y., Titirici, M., Chueh, Y., et al. (2019) · InfoMat · doi:10.1002/inf2.12000 · Cited by 1,174
A Critical Review and Analysis on the Recycling of Spent Lithium-Ion Batteries
Lv, W., Wang, Z., Cao, H., Sun, Y., Zhang, Y., & Sun, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03811 · Cited by 1,163
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Self-citationLocalized High-Concentration Sulfone Electrolytes for High-Efficiency Lithium-Metal Batteries
Ren, X., Chen, S., Lee, H., Mei, D., Engelhard, M. H., Burton, S. D., Zhao, W., Zheng, J., Li, Q., Ding, M. S., et al. (2018) · Chem · doi:10.1016/j.chempr.2018.05.002 · Cited by 1,024
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Metal–organic frameworks as platforms for clean energy
Li, S.-L., & Xu, Q. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40507a · Cited by 970
Progress of enhancing the safety of lithium ion battery from the electrolyte aspect
Wang, Q., Jiang, L., Yu, Y., & Sun, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.035 · Cited by 915
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Recent progress in high-voltage lithium ion batteries
Hu, M., Pang, X., & Zhou, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.024 · Cited by 776
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Zhou, L., Zhang, K., Hu, Z., Tao, Z., Mai, L., Kang, Y., Chou, S., & Chen, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701415 · Cited by 593
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
A review of Ni-based layered oxides for rechargeable Li-ion batteries
Xu, J., Lin, F., Doeff, M. M., & Tong, W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta07991a · Cited by 517
Cho, Y., Oh, P., & Cho, J. (2013) · Nano Letters · doi:10.1021/nl304558t · Cited by 501
Conversion Reaction‐Based Oxide Nanomaterials for Lithium Ion Battery Anodes
Yu, S., Lee, S. H., Lee, D. J., Sung, Y., & Hyeon, T. (2016) · Small · doi:10.1002/smll.201502299 · Cited by 499
Vanadium‐Based Nanomaterials: A Promising Family for Emerging Metal‐Ion Batteries
Xu, X., Xiong, F., Meng, J., Wang, X., Niu, C., An, Q., & Mai, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904398 · Cited by 482
LiMnPO4 – A next generation cathode material for lithium-ion batteries
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01393b · Cited by 466
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
Chang, J., Huang, X., Zhou, G., Cui, S., Hallac, P. B., Jiang, J., Hurley, P. T., & Chen, J. (2014) · Advanced Materials · doi:10.1002/adma.201302757 · Cited by 425
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Solution combustion synthesis of metal oxide nanomaterials for energy storage and conversion
Li, F.-T., Ran, J., Jaroniec, M., & Qiao, S. Z. (2015) · Nanoscale · doi:10.1039/c5nr05299h · Cited by 400
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Interphases in Sodium‐Ion Batteries
Song, J., Xiao, B., Lin, Y., Xu, K., & Li, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703082 · Cited by 389
High-Energy Batteries: Beyond Lithium-Ion and Their Long Road to Commercialisation
Gao, Y., Pan, Z., Sun, J., Liu, Z., & Wang, J. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00844-2 · Cited by 378
Comprehensive review of lithium-ion battery materials and development challenges
Nasajpour-Esfahani, N., Garmestani, H., Bagheritabar, M., Jasim, D. J., Toghraie, D., Dadkhah, S., & Firoozeh, H. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114783 · Cited by 374
Silicon nanowires for Li-based battery anodes: a review
Zamfir, M. R., Nguyen, H. T., Moyen, E., Lee, Y. H., & Pribat, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11714f · Cited by 368
Ma, J., Hu, P., Cui, G., & Chen, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00948 · Cited by 352
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Chakraborty, A., Kunnikuruvan, S., Kumar, S., Markovsky, B., Aurbach, D., Dixit, M., & Major, D. T. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04066 · Cited by 322
Li, Q., Wang, Y., Wang, X., Sun, X., Zhang, J.-N., Yu, X., & Li, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16727 · Cited by 319
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 306
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Pieczonka, N. P. W., Borgel, V., Ziv, B., Leifer, N., Dargel, V., Aurbach, D., Kim, J., Liu, Z., Huang, X., Krachkovskiy, S. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501008 · Cited by 262
Metadata
- Authors
- Kraytsberg, A., & Ein‐Eli, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-06-18
- Volume
- 2
- Issue
- 8
- Pages
- 922-939
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2109124372
- Cited by
- 698
- References
- 123
- FWCI
- 34.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.