The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
The Importance of Fullerene Percolation in the Mixed Regions of Polymer–Fullerene Bulk Heterojunction Solar Cells
Abstract
Most optimized donor‐acceptor (D‐A) polymer bulk heterojunction (BHJ) solar cells have active layers too thin to absorb greater than ∼80% of incident photons with energies above the polymer's band gap. If the thickness of these devices could be increased without sacrificing internal quantum efficiency, the device power conversion efficiency (PCE) could be significantly enhanced. We examine the device characteristics of BHJ solar cells based on poly(di(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐co‐octylthieno[3,4‐c]pyrrole‐4,6‐dione) (PBDTTPD) and [6,6]‐phenyl‐C 61‐butyric acid methyl ester (PCBM) with 7.3% PCE and find that bimolecular recombination limits the active layer thickness of these devices. Thermal annealing does not mitigate these bimolecular recombination losses and drastically decreases the PCE of PBDTTPD BHJ solar cells. We characterize the morphology of these BHJs before and after thermal annealing and determine that thermal annealing drastically reduces the concentration of PCBM in the mixed regions, which consist of PCBM dispersed in the amorphous portions of PBDTTPD. Decreasing the concentration of PCBM may reduce the number of percolating electron transport pathways within these mixed regions and create morphological electron traps that enhance charge‐carrier recombination and limit device quantum efficiency. These findings suggest that (i) the concentration of PCBM in the mixed regions of polymer BHJs must be above the PCBM percolation threshold in order to attain high solar cell internal quantum efficiency, and (ii) novel processing techniques, which improve polymer hole mobility while maintaining PCBM percolation within the mixed regions, should be developed in order to limit bimolecular recombination losses in optically thick devices and maximize the PCE of polymer BHJ solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Two-dimensional charge transport in self-organized, high-mobility conjugated polymers
Sirringhaus, H., Brown, P. J., Friend, R. H., Nielsen, M. M., Bechgaard, K., Langeveld-Voss, B. M. W., Spiering, A. J. H., Janssen, R. A. J., Meijer, E. W., Herwig, P., et al. (1999) · Nature · doi:10.1038/44359 · Cited by 4,624
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Modeling photocurrent action spectra of photovoltaic devices based on organic thin films
Pettersson, L. A. A., Roman, L. S., & Inganäs, O. (1999) · Journal of Applied Physics · doi:10.1063/1.370757 · Cited by 1,642
Processing Additives for Improved Efficiency from Bulk Heterojunction Solar Cells
Lee, J. K., Ma, W. L., Brabec, C. J., Yuen, J., Moon, J. S., Kim, J. Y., Lee, K., Bazan, G. C., & Heeger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja710079w · Cited by 1,613
Cited by
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Imide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Flexible, highly efficient all-polymer solar cells
Kim, T., Kim, J.-H., Kang, T. E., Lee, C., Kang, H., Shin, M., Wang, C., Ma, B., Jeong, U., Kim, T.-S., et al. (2015) · Nature Communications · doi:10.1038/ncomms9547 · Cited by 861
Efficient charge generation by relaxed charge-transfer states at organic interfaces
Vandewal, K., Albrecht, S., Hoke, E. T., Graham, K. R., Widmer, J., Douglas, J. D., Schubert, M., Mateker, W. R., Bloking, J. T., Burkhard, G. F., et al. (2014) · Nature Materials · doi:10.1038/nmat3807 · Cited by 775
Self-citationRecent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Ye, L., Hu, H., Ghasemi, M., Wang, T., Collins, B. A., Kim, J.-H., Jiang, K., Carpenter, J. H., Li, H., Li, Z., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0005-1 · Cited by 707
Self-citationCabanetos, C., El Labban, A., Bartelt, J. A., Douglas, J. D., Mateker, W. R., Fréchet, J. M. J., McGehee, M. D., & Beaujuge, P. M. (2013) · Journal of the American Chemical Society · doi:10.1021/ja400365b · Cited by 679
Self-citationUnderstanding Energy Loss in Organic Solar Cells: Toward a New Efficiency Regime
Menke, S. M., Ran, N. A., Bazan, G. C., & Friend, R. H. (2018) · Joule · doi:10.1016/j.joule.2017.09.020 · Cited by 630
A History and Perspective of Non‐Fullerene Electron Acceptors for Organic Solar Cells
Armin, A., Li, W., Sandberg, O. J., Xiao, Z., Ding, L., Nelson, J., Neher, D., Vandewal, K., Shoaee, S., Wang, T., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003570 · Cited by 545
Self-citationHigh-performance multiple-donor bulk heterojunction solar cells
Yang, Y. (., Chen, W., Dou, L., Chang, W.-H., Duan, H.-S., Bob, B., Li, G., & Yang, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.9 · Cited by 527
The role of the third component in ternary organic solar cells
Gasparini, N., Salleo, A., McCulloch, I., & Baran, D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0093-4 · Cited by 494
Zhang, X., Lu, Z., Ye, L., Zhan, C., Hou, J., Zhang, S., Jiang, B., Zhao, Y., Huang, J., Zhang, S., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300897 · Cited by 474
Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics
Mateker, W. R., & McGehee, M. D. (2017) · Advanced Materials · doi:10.1002/adma.201603940 · Cited by 460
Self-citationSmall is Powerful: Recent Progress in Solution‐Processed Small Molecule Solar Cells
Collins, S. D., Ran, N. A., Heiber, M. C., & Nguyen, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602242 · Cited by 414
A molecular interaction–diffusion framework for predicting organic solar cell stability
Ghasemi, M., Balar, N., Peng, Z., Hu, H., Qin, Y., Kim, T., Rech, J. J., Bidwell, M., Mask, W., McCulloch, I., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00872-6 · Cited by 409
Self-citationBurke, T. M., Sweetnam, S., Vandewal, K., & McGehee, M. D. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500123 · Cited by 408
Self-citationCharge-transfer electronic states in organic solar cells
Coropceanu, V., Chen, X.-K., Wang, T., Zheng, Z., & Brédas, J.-L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0137-9 · Cited by 395
Kang, H., Uddin, M. A., Lee, C., Kim, K.-H., Nguyen, T. L., Lee, W., Li, Y., Wang, C., Woo, H. Y., & Kim, B. J. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5123182 · Cited by 381
Eftaiha, A. F., Sun, J.-P., Hill, I. G., & Welch, G. C. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14236a · Cited by 379
Gasparini, N., Jiao, X., Heumueller, T., Baran, D., Matt, G. J., Fladischer, S., Spiecker, E., Ade, H., Brabec, C. J., & Ameri, T. (2016) · Nature Energy · doi:10.1038/nenergy.2016.118 · Cited by 368
Self-citationThe Bulk Heterojunction in Organic Photovoltaic, Photodetector, and Photocatalytic Applications
Wadsworth, A., Hamid, Z., Kosco, J., Gasparini, N., & McCulloch, I. (2020) · Advanced Materials · doi:10.1002/adma.202001763 · Cited by 332
Graham, K. R., Cabanetos, C., Jahnke, J. P., Idso, M. N., El Labban, A., Ngongang Ndjawa, G. O., Heumueller, T., Vandewal, K., Salleo, A., Chmelka, B. F., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502985g · Cited by 315
Self-citationMa, W., Tumbleston, J. R., Wang, M., Gann, E., Huang, F., & Ade, H. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200912 · Cited by 306
Self-citationWan, Q., Guo, X., Wang, Z., Li, W., Guo, B., Ma, W., Zhang, M., & Li, Y. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602181 · Cited by 299
Lee, C., Kang, H., Lee, W., Kim, T., Kim, K., Woo, H. Y., Wang, C., & Kim, B. J. (2015) · Advanced Materials · doi:10.1002/adma.201405226 · Cited by 296
Tremolet de Villers, B. J., O’Hara, K. A., Ostrowski, D. P., Biddle, P. H., Shaheen, S. E., Chabinyc, M. L., Olson, D. C., & Kopidakis, N. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04346 · Cited by 277
Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics
Liu, F., Gu, Y., Shen, X., Ferdous, S., Wang, H.-W., & Russell, T. P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.010 · Cited by 268
Mobility-Controlled Performance of Thick Solar Cells Based on Fluorinated Copolymers
Li, W., Albrecht, S., Yang, L., Roland, S., Tumbleston, J. R., McAfee, T., Yan, L., Kelly, M. A., Ade, H., Neher, D., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5067724 · Cited by 267
Self-citationMaterials Design Considerations for Charge Generation in Organic Solar Cells
Dimitrov, S. D., & Durrant, J. R. (2014) · Chemistry of Materials · doi:10.1021/cm402403z · Cited by 260
A High‐Performing Solution‐Processed Small Molecule:Perylene Diimide Bulk Heterojunction Solar Cell
Sharenko, A., Proctor, C. M., van der Poll, T. S., Henson, Z. B., Nguyen, T., & Bazan, G. C. (2013) · Advanced Materials · doi:10.1002/adma.201301167 · Cited by 258
Bimolecular Recombination in Organic Photovoltaics
Lakhwani, G., Rao, A., & Friend, R. H. (2014) · Annual Review of Physical Chemistry · doi:10.1146/annurev-physchem-040513-103615 · Cited by 258
Li, W., Yang, L., Tumbleston, J. R., Yan, L., Ade, H., & You, W. (2014) · Advanced Materials · doi:10.1002/adma.201305251 · Cited by 224
Self-citationHe, X., Mukherjee, S., Watkins, S., Chen, M., Qin, T., Thomsen, L., Ade, H., & McNeill, C. R. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp501222w · Cited by 44
Self-citationNew soluble porphyrin bearing a pyridinylethynyl group as donor for bulk heterojunction solar cells
Sharma, G. D., Daphnomili, D., Biswas, S., & Coutsolelos, A. G. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.03.023 · Cited by 30
Metadata
- Authors
- Bartelt, J. A., Beiley, Z. M., Hoke, E. T., Mateker, W. R., Douglas, J. D., Collins, B. A., Tumbleston, J. R., Graham, K. R., Amassian, A., Ade, H., Fréchet, J. M. J., Toney, M. F., & McGehee, M. D.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-10-26
- Volume
- 3
- Issue
- 3
- Pages
- 364-374
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2037441291
- Cited by
- 445
- References
- 51
- FWCI
- 31.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.