The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
New O2/P2‐type Li‐Excess Layered Manganese Oxides as Promising Multi‐Functional Electrode Materials for Rechargeable Li/Na Batteries
Abstract
A new and promising P2‐type layered oxide, Na 5/6[Li 1/4 Mn 3/4]O 2 is prepared using a solid‐state method. Detailed crystal structures of the sample are analyzed by synchrotron X‐ray diffraction combined with high‐resolution neutron diffraction. P2‐type Na 5/6[Li 1/4 Mn 3/4]O 2 consists of two MeO 2 layers with partial in‐plane √3 a × √3 a‐type Li/Mn ordering. Na/Li ion‐exchange in a molten salt results in a phase transition accompanied with glide of [Li 1/4 Mn 3/4]O 2 layers without the destruction of in‐plane cation ordering. P2‐type Na 5/6[Li 1/4 Mn 3/4]O 2 translates into an O2‐type layered structure with staking faults as the result of ion‐exchange. Electrode performance of P2‐type Na 5/6[Li 1/4 Mn 3/4]O 2 and O2‐type Lix[Li 1/4 Mn 3/4]O 2 is examined and compared in Na and Li cells, respectively. Both samples show large reversible capacity, ca. 200 mA h g−1, after charge to high voltage regardless of the difference in charge carriers. Structural analysis suggests that in‐plane structural rearrangements, presumably associated with partial oxygen loss, occur in both samples after charge to a high‐voltage region. Such structural activation process significantly influences electrode performance of the P2/O2‐type phases, similar to O3‐type Li 2 MnO 3‐based materials. Crystal structures, phase‐transition mechanisms, and the possibility of the P2/O2‐type phases as high‐capacity and long‐cycle‐life electrode materials with the multi‐functionality for both rechargeable Li/Na batteries are discussed in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
VESTA: a three-dimensional visualization system for electronic and structural analysis
Momma, K., & Izumi, F. (2008) · Journal of Applied Crystallography · doi:10.1107/s0021889808012016 · Cited by 6,834
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Three-Dimensional Visualization in Powder Diffraction
Izumi, F., & Momma, K. (2007) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.130.15 · Cited by 2,828
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Self-citationKomaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Self-citationHigh Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Structural classification and properties of the layered oxides
Delmas, C., Fouassier, C., & Hagenmuller, P. (1980) · Physica B+C · doi:10.1016/0378-4363(80)90214-4 · Cited by 1,783
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Cited by
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Self-citationSodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Asano, T., Sakai, A., Ouchi, S., Sakaida, M., Miyazaki, A., & Hasegawa, S. (2018) · Advanced Materials · doi:10.1002/adma.201803075 · Cited by 1,275
Towards K‐Ion and Na‐Ion Batteries as “Beyond Li‐Ion”
Kubota, K., Dahbi, M., Hosaka, T., Kumakura, S., & Komaba, S. (2018) · The Chemical Record · doi:10.1002/tcr.201700057 · Cited by 1,015
Self-citationRecent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode
Mu, L., Xu, S., Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Advanced Materials · doi:10.1002/adma.201502449 · Cited by 704
Oxygen redox chemistry without excess alkali-metal ions in Na2/3[Mg0.28Mn0.72]O2
Maitra, U., House, R. A., Somerville, J. W., Tapia-Ruiz, N., Lozano, J. G., Guerrini, N., Hao, R., Luo, K., Jin, L., Pérez-Osorio, M. A., et al. (2018) · Nature Chemistry · doi:10.1038/nchem.2923 · Cited by 644
Li, Y., Lu, Y., Zhao, C., Hu, Y.-S., Titirici, M.-M., Li, H., Huang, X., & Chen, L. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.002 · Cited by 642
Wang, Y., Xiao, R., Hu, Y.-S., Avdeev, M., & Chen, L. (2015) · Nature Communications · doi:10.1038/ncomms7954 · Cited by 592
Eum, D., Kim, B., Kim, S. J., Park, H., Wu, J., Cho, S.-P., Yoon, G., Lee, M. H., Jung, S.-K., Yang, W., et al. (2020) · Nature Materials · doi:10.1038/s41563-019-0572-4 · Cited by 590
Wang, C., Liu, L., Zhao, S., Liu, Y., Yang, Y., Yu, H., Lee, S., Lee, G.-H., Kang, Y.-M., Liu, R., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-22523-3 · Cited by 488
Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?
Liu, Q., Hu, Z., Li, W., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S.-X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02997a · Cited by 468
Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries
Liu, Q., Hu, Z., Chen, M., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S. (2019) · Small · doi:10.1002/smll.201805381 · Cited by 447
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Talaie, E., Duffort, V., Smith, H. L., Fultz, B., & Nazar, L. F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01365h · Cited by 426
Electrochemistry and Solid‐State Chemistry of NaMeO2 (Me = 3d Transition Metals)
Kubota, K., Kumakura, S., Yoda, Y., Kuroki, K., & Komaba, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703415 · Cited by 399
Self-citationShang, Y., Li, X., Song, J., Huang, S., Yang, Z., Xu, Z. J., & Yang, H. Y. (2020) · Chem · doi:10.1016/j.chempr.2020.05.004 · Cited by 397
Zhang, K., Kim, D., Hu, Z., Park, M., Noh, G., Yang, Y., Zhang, J., Lau, V. W.-H., Chou, S.-L., Cho, M., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07646-4 · Cited by 358
Chen, M., Liu, Q., Wang, S., Wang, E., Guo, X., & Chou, S. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803609 · Cited by 341
High‐Entropy and Superstructure‐Stabilized Layered Oxide Cathodes for Sodium‐Ion Batteries
Yao, L., Zou, P., Wang, C., Jiang, J., Ma, L., Tan, S., Beyer, K. A., Xu, F., Hu, E., & Xin, H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201989 · Cited by 280
de la Llave, E., Talaie, E., Levi, E., Nayak, P. K., Dixit, M., Rao, P. T., Hartmann, P., Chesneau, F., Major, D. T., Greenstein, M., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04078 · Cited by 279
Metadata
- Authors
- Yabuuchi, N., Hara, R., Kajiyama, M., Kubota, K., Ishigaki, T., Hoshikawa, A., & Komaba, S.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2014-05-06
- Volume
- 4
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2075999913
- Cited by
- 432
- References
- 43
- FWCI
- 13.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.