The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A High Areal Capacity Flexible Lithium‐Ion Battery with a Strain‐Compliant Design
Abstract
Early demonstrations of wearable devices have driven interest in flexible lithium‐ion batteries. Previous demonstrations of flexible lithium‐ion batteries trade off between low areal capacity, poor mechanical flexibility and/or high thickness of inactive components. Here, a reinforced electrode design is used to support the active layers of the battery and a freestanding carbon nanotube (CNT) layer is used as the current collector. The supported architecture helps to increase the areal capacity (mAh cm‐2) of the battery and improve the tensile strength and mechanical flexibility of the electrodes. Batteries based on lithium cobalt oxide and lithium titanate oxide shows excellent electrochemical and mechanical performance. The battery has an areal capacity of ≈1 mAh cm‐2 and a capacity retention of around 94% after cycling the battery for 450 cycles at a C/2 rate. The reinforced electrode has a tensile strength of ≈5.5–7.0 MPa and shows excellent capacity retention after repeatedly flexing to a bending radius ranging from 45 to 10 mm. The relationships between mechanical flexing, electrochemical performance, and mechanical integrity of the battery are studied using electrochemical cycling, electron microscopy, and electrochemical impedance spectroscopy (EIS).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Xu, S., Zhang, Y., Cho, J., Lee, J., Huang, X., Jia, L., Fan, J. A., Su, Y., Su, J., Zhang, H., et al. (2013) · Nature Communications · doi:10.1038/ncomms2553 · Cited by 1,404
Nanowire active-matrix circuitry for low-voltage macroscale artificial skin
Takei, K., Takahashi, T., Ho, J. C., Ko, H., Gillies, A. G., Leu, P. W., Fearing, R. S., & Javey, A. (2010) · Nature Materials · doi:10.1038/nmat2835 · Cited by 1,274
Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm
Dagdeviren, C., Yang, B. D., Su, Y., Tran, P. L., Joe, P., Anderson, E., Xia, J., Doraiswamy, V., Dehdashti, B., Feng, X., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1317233111 · Cited by 975
Huet, F. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02665-7 · Cited by 593
Cited by
Li, H., Han, C., Huang, Y., Huang, Y., Zhu, M., Pei, Z., Xue, Q., Wang, Z., Liu, Z., Tang, Z., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03232c · Cited by 931
Pu, X., Li, L., Song, H., Du, C., Zhao, Z., Jiang, C., Cao, G., Hu, W., & Wang, Z. L. (2015) · Advanced Materials · doi:10.1002/adma.201500311 · Cited by 731
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
Inorganic nanomaterials for printed electronics: a review
Wu, W. (2017) · Nanoscale · doi:10.1039/c7nr01604b · Cited by 522
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition
Pathak, R., Chen, K., Gurung, A., Reza, K. M., Bahrami, B., Pokharel, J., Baniya, A., He, W., Wu, F., Zhou, Y., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13774-2 · Cited by 455
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
Sumboja, A., Liu, J., Zheng, W. G., Zong, Y., Zhang, H., & Liu, Z. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00237a · Cited by 407
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Textile‐Based Electrochemical Energy Storage Devices
Huang, Q., Wang, D., & Zheng, Z. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600783 · Cited by 338
Stretchable electrochemical energy storage devices
Mackanic, D. G., Chang, T.-H., Huang, Z., Cui, Y., & Bao, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00035c · Cited by 335
Quantifying the factors limiting rate performance in battery electrodes
Tian, R., Park, S.-H., King, P. J., Cunningham, G., Coelho, J., Nicolosi, V., & Coleman, J. N. (2019) · Nature Communications · doi:10.1038/s41467-019-09792-9 · Cited by 326
Transparent and attachable ionic communicators based on self-cleanable triboelectric nanogenerators
Lee, Y., Cha, S. H., Kim, Y.-W., Choi, D., & Sun, J.-Y. (2018) · Nature Communications · doi:10.1038/s41467-018-03954-x · Cited by 299
Di Lecce, D., Verrelli, R., & Hassoun, J. (2017) · Green Chemistry · doi:10.1039/c7gc01328k · Cited by 287
Multi-functional Flexible Aqueous Sodium-Ion Batteries with High Safety
Guo, Z., Zhao, Y., Ding, Y., Dong, X., Chen, L., Cao, J., Wang, C., Xia, Y., Peng, H., & Wang, Y. (2017) · Chem · doi:10.1016/j.chempr.2017.05.004 · Cited by 267
Energy Harvesting For Wearable Devices: A Review
Chong, Y.-W., Ismail, W., Ko, K., & Lee, C.-Y. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2925638 · Cited by 263
Balogun, M.-S., Yang, H., Luo, Y., Qiu, W., Huang, Y., Liu, Z.-Q., & Tong, Y. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00522b · Cited by 254
Metadata
- Authors
- Gaikwad, A. M., Khau, B. V., Davies, G., Hertzberg, B., Steingart, D. A., & Arias, A. C.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2014-09-23
- Volume
- 5
- Issue
- 3
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2130980536
- Cited by
- 211
- References
- 6
- FWCI
- 9.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.