The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Nanoconfined Carbon‐Coated Na3V2(PO4)3 Particles in Mesoporous Carbon Enabling Ultralong Cycle Life for Sodium‐Ion Batteries
Abstract
Na 3 V 2(PO 4)3 (denoted as NVP) has been considered as a promising cathode material for room temperature sodium ion batteries. Nevertheless, NVP suffers from poor rate capability resulting from the low electronic conductivity. Here, the feasibility to approach high rate capability by designing carbon‐coated NVP nanoparticles confined into highly ordered mesoporous carbon CMK‐3 matrix (NVP@C@CMK‐3) is reported. The NVP@C@CMK‐3 is prepared by a simple nanocasting technique. The electrode exhibits superior rate capability and ultralong cyclability (78 mA h g−1 at 5 C after 2000 cycles) compared to carbon‐coated NVP and pure NVP cathode. The improved electrochemical performance is attributed to double carbon coating design that combines a variety of advantages: very short diffusion length of Na+/e− in NVP, easy access of electrolyte, and short transport path of Na+ through carbon toward the NVP nanoparticle, high conductivity transport of electrons through the 3D interconnected channels of carbon host. The optimum design of the core–shell nanostructures with double carbon coating permits fast kinetics for both transported Na+ ions and electrons, enabling high‐power performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Recent Progress in the Synthesis of Porous Carbon Materials
Lee, J., Kim, J., & Hyeon, T. (2006) · Advanced Materials · doi:10.1002/adma.200501576 · Cited by 2,127
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Ong, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Electrochemical investigation of the P2–NaxCoO2 phase diagram
Berthelot, R., Carlier, D., & Delmas, C. (2011) · Nature Materials · doi:10.1038/nmat2920 · Cited by 1,232
Saravanan, K., Mason, C. W., Rudola, A., Wong, K. H., & Balaya, P. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200803 · Cited by 810
Na2Ti3O7: Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries
Senguttuvan, P., Rousse, G., Seznec, V., Tarascon, J.-M., & Palacín, M. R. (2011) · Chemistry of Materials · doi:10.1021/cm202076g · Cited by 807
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Zhao, L., Zhao, J., Hu, Y., Li, H., Zhou, Z., Armand, M., & Chen, L. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200166 · Cited by 568
Wenzel, S., Hara, T., Janek, J., & Adelhelm, P. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01744f · Cited by 544
Li, S., Dong, Y., Xu, L., Xu, X., He, L., & Mai, L. (2014) · Advanced Materials · doi:10.1002/adma.201305522 · Cited by 526
Zhu, C., Song, K., van Aken, P. A., Maier, J., & Yu, Y. (2014) · Nano Letters · doi:10.1021/nl500548a · Cited by 504
Self-citationAn Advanced Selenium–Carbon Cathode for Rechargeable Lithium–Selenium Batteries
Yang, C., Xin, S., Yin, Y., Ye, H., Zhang, J., & Guo, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303147 · Cited by 452
Na 3 V 2 (PO 4 ) 3 @C core–shell nanocomposites for rechargeable sodium-ion batteries
Duan, W., Zhu, Z., Li, H., Hu, Z., Zhang, K., Cheng, F., & Chen, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00106k · Cited by 411
Wang, G., Liu, H., Liu, J., Qiao, S., Lu, G. M., Munroe, P., & Ahn, H. (2010) · Advanced Materials · doi:10.1002/adma.201002045 · Cited by 404
Shen, W., Wang, C., Xu, Q., Liu, H., & Wang, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400982 · Cited by 387
Lim, S. Y., Kim, H., Shakoor, R. A., Jung, Y., & Choi, J. W. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.015209jes · Cited by 379
A combined first principles and experimental study on Na3V2(PO4)2F3 for rechargeable Na batteries
Shakoor, R. A., Seo, D.-H., Kim, H., Park, Y.-U., Kim, J., Kim, S.-W., Gwon, H., Lee, S., & Kang, K. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33862a · Cited by 365
Single-Crystalline Bilayered V2O5 Nanobelts for High-Capacity Sodium-Ion Batteries
Su, D., & Wang, G. (2013) · ACS Nano · doi:10.1021/nn405014d · Cited by 345
Shen, L., Zhang, X., Uchaker, E., Yuan, C., & Cao, G. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100720 · Cited by 339
Topochemical Synthesis of Sodium Metal Phosphate Olivines for Sodium-Ion Batteries
Lee, K. T., Ramesh, T. N., Nan, F., Botton, G., & Nazar, L. F. (2011) · Chemistry of Materials · doi:10.1021/cm200450y · Cited by 309
Electrospun Na3V2(PO4)3/C nanofibers as stable cathode materials for sodium-ion batteries
Liu, J., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05329f · Cited by 296
Self-citationThe nasicon-type titanium phosphates Ati2(PO4)3 (A=Li, Na) as electrode materials
Delmas, C., Nadiri, A., & Soubeyroux, J. L. (1988) · Solid State Ionics · doi:10.1016/s0167-2738(88)80075-4 · Cited by 288
Graphene-supported Na3V2(PO4)3 as a high rate cathode material for sodium-ion batteries
Jung, Y. H., Lim, C. H., & Kim, D. K. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12116j · Cited by 279
NaxVO2 as possible electrode for Na-ion batteries
Hamani, D., Ati, M., Tarascon, J.-M., & Rozier, P. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.06.005 · Cited by 247
Sauvage, F., Quarez, E., Tarascon, J.-M., & Baudrin, E. (2006) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2006.05.009 · Cited by 197
α-Na3M2(PO4)3 (M = Ti, Fe): Absolute Cationic Ordering in NASICON-Type Phases
Kabbour, H., Coillot, D., Colmont, M., Masquelier, C., & Mentré, O. (2011) · Journal of the American Chemical Society · doi:10.1021/ja204321y · Cited by 175
Li, W., Yang, Z., Jiang, Y., Yu, Z., Gu, L., & Yu, Y. M. (2014) · Carbon · doi:10.1016/j.carbon.2014.07.026 · Cited by 171
Self-citationNa3V2(PO4)3 as cathode material for hybrid lithium ion batteries
Du, K., Guo, H., Hu, G., Peng, Z., & Cao, Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.069 · Cited by 123
Self-citationShen, W., Wang, C., Liu, H., & Yang, W. (2013) · Chemistry - A European Journal · doi:10.1002/chem.201300005 · Cited by 121
Ordered CoO/CMK-3 nanocomposites as the anode materials for lithium-ion batteries
Zhang, H., Tao, H., Jiang, Y., et al. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.003 · Cited by 101
Self-citationSonochemical Synthesis of Ordered SnO2/CMK-3 Nanocomposites and Their Lithium Storage Properties
Qiao, H., Li, J., Fu, J., Kumar, D. N. T., Weı, Q., Cai, Y., & Huang, F. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200884k · Cited by 76
Li, B., Zhang, N., & Sun, K. (2014) · Small · doi:10.1002/smll.201303375 · Cited by 66
Kawase, T., & Yoshitake, H. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.01.021 · Cited by 29
Cited by
Polyanion-type cathode materials for sodium-ion batteries
Jin, T., Li, H., Zhu, K., Wang, P.-F., Liu, P., & Jiao, L. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00846b · Cited by 908
Wei, Q., Xiong, F., Tan, S., Huang, L., Lan, E. H., Dunn, B., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201602300 · Cited by 802
Towards polyvalent ion batteries: A zinc-ion battery based on NASICON structured Na3V2(PO4)3
Li, G., Yang, Z., Jiang, Y., Jin, C., Huang, W., Ding, X., & Huang, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.051 · Cited by 734
Self-citationXiao, L., Lu, H., Fang, Y., Sushko, M. L., Cao, Y., Ai, X., Yang, H., & Liu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703238 · Cited by 726
Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries
Chen, S., Wu, C., Shen, L., Zhu, C., Huang, Y., Xi, K., Maier, J., & Yu, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700431 · Cited by 705
Self-citation
Metadata
- Authors
- Jiang, Y., Yang, Z., Li, W., Zeng, L., Pan, F., Wang, M., Wei, X., Hu, G., Gu, L., & Yu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-02-27
- Volume
- 5
- Issue
- 10
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2111281387
- Cited by
- 362
- References
- 43
- FWCI
- 23.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.