The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Abstract
Over the past five years, the rapid emergence of a new class of solar cell based on mixed organic–inorganic halide perovskite semiconductors has captured the attention of scientists and researchers in the field of energy conversion. Benefiting from the optimization of perovskite film deposition approaches, the design of new material systems, and the diversity of device concepts, the efficiency of perovskite solar cells (PSCs) has increased from 2.19% in 2006 to a certified 20.1% in 2014, making this the fastest‐advancing solar cell technology to date. However, as a photovoltaic technology, which needs to meet the requirements of working under long‐term sunlight, PSCs suffer stability concerns for both materials and devices. Evolved from dye‐sensitized solar cells (DSSCs), PSCs usually contain a mesoporous electron transporting layer or scaffold layer, a perovskite active layer, a hole transporting layer and a back contact to construct a mesoscopic‐structured device. Using interface engineering, mesoscopic PSCs (MPSCs) have obtained exciting stability with a hole‐conductor‐free printable triple‐layer architecture or conventional heterojunction version. Herein, the achievements of mesoscopic solar cells from solid‐state DSSCs to MPSCs are outlined and summary of recent progress in the stability of MPSCs is presented. Possible degradation mechanism and solutions are presented and, finally, challenges for the commercialization of this photovoltaic technology are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
A Eu 3+ -Eu 2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Wang, L., Zhou, H., Hu, J., Huang, B., Sun, M., Dong, B., Zheng, G., Huang, Y., Chen, Y., Li, L., et al. (2019) · Science · doi:10.1126/science.aau5701 · Cited by 1,093
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
2D Ruddlesden–Popper Perovskites for Optoelectronics
Chen, Y., Sun, Y., Peng, J., Tang, J., Zheng, K., & Liang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201703487 · Cited by 892
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Wang, F., Geng, W., Zhou, Y., Fang, H., Tong, C., Loi, M. A., Liu, L., & Zhao, N. (2016) · Advanced Materials · doi:10.1002/adma.201603062 · Cited by 624
Self-citationCesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells
Chen, M., Ju, M.-G., Carl, A. D., Zong, Y., Grimm, R. L., Gu, J., Zeng, X. C., Zhou, Y., & Padture, N. P. (2018) · Joule · doi:10.1016/j.joule.2018.01.009 · Cited by 607
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer
Wang, L., Li, D.-B., Li, K., Chen, C., Deng, H.-X., Gao, L., Zhao, Y., Jiang, F., Li, L., Huang, F., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.46 · Cited by 592
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Inverted Perovskite Solar Cells: Progresses and Perspectives
Liu, T., Chen, K., Hu, Q., Zhu, R., & Gong, Q. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600457 · Cited by 483
New-generation integrated devices based on dye-sensitized and perovskite solar cells
Yun, S., Qin, Y., Uhl, A. R., Vlachopoulos, N., Yin, M., Li, D., Han, X., & Hagfeldt, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03165c · Cited by 478
Ju, M.-G., Chen, M., Zhou, Y., Garces, H. F., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01167 · Cited by 476
Recent Progress on the Long‐Term Stability of Perovskite Solar Cells
Fu, Q., Tang, X., Huang, B., Hu, T., Tan, L., Chen, L., & Chen, Y. (2018) · Advanced Science · doi:10.1002/advs.201700387 · Cited by 454
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Chen, W., Liu, F., Feng, X., Djurišić, A. B., Chan, W. K., & He, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700722 · Cited by 457
Understanding the Doping Effect on NiO: Toward High‐Performance Inverted Perovskite Solar Cells
Chen, W., Wu, Y., Fan, J., Djurišić, A. B., Liu, F., Tam, H. W., Ng, A., Surya, C., Chan, W. K., Wang, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703519 · Cited by 435
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Bai, Y., Dong, Q., Shao, Y., Deng, Y., Wang, Q., Shen, L., Wang, D., Wei, W., & Huang, J. (2016) · Nature Communications · doi:10.1038/ncomms12806 · Cited by 417
Phthalocyanines for dye-sensitized solar cells
Urbani, M., Ragoussi, M.-E., Nazeeruddin, M. K., & Torres, T. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.10.007 · Cited by 399
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
CsPbBr3 Perovskite Quantum Dot Vertical Cavity Lasers with Low Threshold and High Stability
Huang, C.-Y., Zou, C., Mao, C., Corp, K. L., Yao, Y.-C., Lee, Y.-J., Schlenker, C. W., Jen, A. K. Y., & Lin, L. Y. (2017) · ACS Photonics · doi:10.1021/acsphotonics.7b00520 · Cited by 346
From Ultrafast to Ultraslow: Charge-Carrier Dynamics of Perovskite Solar Cells
Shi, J., Li, Y., Li, Y., Li, D., Luo, Y., Wu, H., & Meng, Q. (2018) · Joule · doi:10.1016/j.joule.2018.04.010 · Cited by 341
Encapsulation for long-term stability enhancement of perovskite solar cells
Matteocci, F., Cinà, L., Lamanna, E., Cacovich, S., Divitini, G., Midgley, P. A., Ducati, C., & Di Carlo, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.041 · Cited by 340
Yuan, J., Ling, X., Yang, D., Li, F., Zhou, S., Shi, J., Qian, Y., Hu, J., Sun, Y., Yang, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.011 · Cited by 333
Toward Eco-friendly and Stable Perovskite Materials for Photovoltaics
Ju, M.-G., Chen, M., Zhou, Y., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · Joule · doi:10.1016/j.joule.2018.04.026 · Cited by 330
Wei, D., Ma, F., Wang, R., Dou, S., Cui, P., Huang, H., Ji, J., Jia, E., Jia, X., Sajid, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707583 · Cited by 330
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Self-citationFundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Iodine Migration and Degradation of Perovskite Solar Cells Enhanced by Metallic Electrodes
Besleaga, C., Abramiuc, L. E., Stancu, V., Tomulescu, A. G., Sima, M., Trinca, L., Plugaru, N., Pintilie, L., Nemnes, G. A., Iliescu, M., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b02375 · Cited by 305
Qin, P., Yang, G., Ren, Z., Cheung, S. H., So, S. K., Chen, L., Hao, J., Hou, J., & Li, G. (2018) · Advanced Materials · doi:10.1002/adma.201706126 · Cited by 293
All-in-one energy harvesting and storage devices
Lee, J.-H., Kim, J., Kim, T. Y., Al Hossain, M. S., Kim, S.-W., & Kim, J. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01229a · Cited by 292
Sanehira, E. M., Tremolet de Villers, B. J., Schulz, P., Reese, M. O., Ferrere, S., Zhu, K., Lin, L. Y., Berry, J. J., & Luther, J. M. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00013 · Cited by 285
Manipulation of facet orientation in hybrid perovskite polycrystalline films by cation cascade
Zheng, G., Zhu, C., Ma, J., Zhang, X., Tang, G., Li, R., Chen, Y., Li, L., Hu, J., Hong, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05076-w · Cited by 278
Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Zhou, T., Lai, H., Liu, T., Lu, D., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901242 · Cited by 272
Layer-by-Layer Degradation of Methylammonium Lead Tri-iodide Perovskite Microplates
Fan, Z., Xiao, H., Wang, Y., Zhao, Z., Lin, Z., Cheng, H.-C., Lee, S.-J., Wang, G., Feng, Z., Goddard, W. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.005 · Cited by 271
Low-temperature carbon-based electrodes in perovskite solar cells
Bogachuk, D., Zouhair, S., Wojciechowski, K., Yang, B., Babu, V., Wagner, L., Xu, B., Lim, J., Mastroianni, S., Pettersson, H., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02175j · Cited by 268
Emerging Semitransparent Solar Cells: Materials and Device Design
Tai, Q., & Yan, F. (2017) · Advanced Materials · doi:10.1002/adma.201700192 · Cited by 262
A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells
Ava, T. T., Al Mamun, A., Marsillac, S., & Namkoong, G. (2019) · Applied Sciences · doi:10.3390/app9010188 · Cited by 260
Organometal halide perovskite thin films and solar cells by vapor deposition
Ono, L. K., Leyden, M. R., Wang, S., & Qi, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08963h · Cited by 258
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Metadata
- Authors
- Rong, Y., Liu, L., Mei, A., Li, X., & Han, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-09-24
- Volume
- 5
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2128129463
- Cited by
- 473
- References
- 119
- FWCI
- 33.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.