The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Abstract
Over the past five years, the rapid emergence of a new class of solar cell based on mixed organic–inorganic halide perovskite semiconductors has captured the attention of scientists and researchers in the field of energy conversion. Benefiting from the optimization of perovskite film deposition approaches, the design of new material systems, and the diversity of device concepts, the efficiency of perovskite solar cells (PSCs) has increased from 2.19% in 2006 to a certified 20.1% in 2014, making this the fastest‐advancing solar cell technology to date. However, as a photovoltaic technology, which needs to meet the requirements of working under long‐term sunlight, PSCs suffer stability concerns for both materials and devices. Evolved from dye‐sensitized solar cells (DSSCs), PSCs usually contain a mesoporous electron transporting layer or scaffold layer, a perovskite active layer, a hole transporting layer and a back contact to construct a mesoscopic‐structured device. Using interface engineering, mesoscopic PSCs (MPSCs) have obtained exciting stability with a hole‐conductor‐free printable triple‐layer architecture or conventional heterojunction version. Herein, the achievements of mesoscopic solar cells from solid‐state DSSCs to MPSCs are outlined and summary of recent progress in the stability of MPSCs is presented. Possible degradation mechanism and solutions are presented and, finally, challenges for the commercialization of this photovoltaic technology are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Yella, A., Lee, H.-W., Tsao, H. N., Yi, C., Chandiran, A. K., Nazeeruddin, M. K., Diau, E. W.-G., Yeh, C.-Y., Zakeeruddin, S. M., & Grätzel, M. (2011) · Science · doi:10.1126/science.1209688 · Cited by 5,977
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Solar Energy Conversion by Dye-Sensitized Photovoltaic Cells
Grätzel, M. (2005) · Inorganic Chemistry · doi:10.1021/ic0508371 · Cited by 3,385
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Self-citationPerovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Recent Advances in Sensitized Mesoscopic Solar Cells
Grätzel, M. (2009) · Accounts of Chemical Research · doi:10.1021/ar900141y · Cited by 2,671
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Solar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Dye-Sensitized Solar Cells with Conversion Efficiency of 11.1%
Chiba, Y., Islam, A., Watanabe, Y., Komiya, R., Koide, N., & Han, L. (2006) · Japanese Journal of Applied Physics · doi:10.1143/jjap.45.l638 · Cited by 1,935
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter-wave spectroscopy
Poglitsch, A., & Weber, D. (1987) · The Journal of Chemical Physics · doi:10.1063/1.453467 · Cited by 1,625
Park, N.-G. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400892a · Cited by 1,382
Christians, J. A., Miranda Herrera, P. A., & Kamat, P. V. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511132a · Cited by 1,367
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Christians, J. A., Fung, R. C. M., & Kamat, P. V. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411014k · Cited by 1,313
Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
The renaissance of dye-sensitized solar cells
Hardin, B. E., Snaith, H. J., & McGehee, M. D. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.22 · Cited by 1,304
Amat, A., Mosconi, E., Ronca, E., Quarti, C., Umari, P., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2014) · Nano Letters · doi:10.1021/nl5012992 · Cited by 1,285
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Kay, A., & Grätzel, M. (1996) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(96)00063-3 · Cited by 1,206
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Self-citationMaterials interface engineering for solution-processed photovoltaics
Graetzel, M., Janssen, R. A. J., Mitzi, D. B., & Sargent, E. H. (2012) · Nature · doi:10.1038/nature11476 · Cited by 1,112
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
First-Principles Modeling of Mixed Halide Organometal Perovskites for Photovoltaic Applications
Mosconi, E., Amat, A., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4048659 · Cited by 976
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Qin, P., Tanaka, S., Ito, S., Tetreault, N., Manabe, K., Nishino, H., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Communications · doi:10.1038/ncomms4834 · Cited by 894
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
Self-citationHodes, G. (2013) · Science · doi:10.1126/science.1245473 · Cited by 805
Colella, S., Mosconi, E., Fedeli, P., Listorti, A., Gazza, F., Orlandi, F., Ferro, P., Besagni, T., Rizzo, A., Calestani, G., et al. (2013) · Chemistry of Materials · doi:10.1021/cm402919x · Cited by 796
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Depleted hole conductor-free lead halide iodide heterojunction solar cells
Laban, W. A., & Etgar, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42282h · Cited by 759
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
Electron Transfer Dynamics in Dye-Sensitized Solar Cells
Listorti, A., O’Regan, B., & Durrant, J. R. (2011) · Chemistry of Materials · doi:10.1021/cm200651e · Cited by 654
Ito, S., Tanaka, S., Manabe, K., & Nishino, H. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500449z · Cited by 585
The Role of Chlorine in the Formation Process of “CH3NH3PbI3‐xClx” Perovskite
Yu, H., Wang, F., Xie, F., Li, W., Chen, J., & Zhao, N. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401872 · Cited by 572
Misra, R. K., Aharon, S., Li, B., Mogilyansky, D., Visoly-Fisher, I., Etgar, L., & Katz, E. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502642b · Cited by 552
Dye-Sensitized Nanostructured p-Type Nickel Oxide Film as a Photocathode for a Solar Cell
He, J., Lindström, H., Hagfeldt, A., & Lindquist, S.-E. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp991681r · Cited by 525
Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination
Krüger, J., Plass, R., Cevey, L., Piccirelli, M., Grätzel, M., & Bach, U. (2001) · Applied Physics Letters · doi:10.1063/1.1406148 · Cited by 522
Shi, J., Dong, J., Lv, S., Xu, Y., Zhu, L., Xiao, J., Xu, X., Wu, H., Li, D., Luo, Y., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4864638 · Cited by 505
Henderson, M. A., Epling, W. S., Perkins, C. L., Peden, C. H. F., & Diebold, U. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp990655q · Cited by 482
Philippe, B., Park, B.-W., Lindblad, R., Oscarsson, J., Ahmadi, S., Johansson, E. M. J., & Rensmo, H. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00348 · Cited by 462
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Self-citationp-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444
Interfaces in Perovskite Solar Cells
Shi, J., Xu, X., Li, D., & Meng, Q. (2015) · Small · doi:10.1002/smll.201403534 · Cited by 395
Role of Chloride in the Morphological Evolution of Organo-Lead Halide Perovskite Thin Films
Williams, S. T., Zuo, F., Chueh, C.-C., Liao, C.-Y., Liang, P.-W., & Jen, A. K.-Y. (2014) · ACS Nano · doi:10.1021/nn5041922 · Cited by 385
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Li, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Self-citationSnaith, H. J., Moule, A. J., Klein, C., Meerholz, K., Friend, R. H., & Grätzel, M. (2007) · Nano Letters · doi:10.1021/nl071656u · Cited by 374
Wang, K.-C., Shen, P.-S., Li, M.-H., Chen, S., Lin, M.-W., Chen, P., & Guo, T.-F. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503610u · Cited by 358
Mesoscopic Solar Cells for Electricity and Hydrogen Production from Sunlight
Grätzel, M. (2005) · Chemistry Letters · doi:10.1246/cl.2005.8 · Cited by 357
Cation rotation in methylammonium lead halides
Wasylishen, R. E., Knop, O., & Macdonald, J. B. (1985) · Solid State Communications · doi:10.1016/0038-1098(85)90959-7 · Cited by 355
Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
Fabrication of an Efficient Solid-State Dye-Sensitized Solar Cell
Meng, Q.-B., Takahashi, K., Zhang, X.-T., Sutanto, I., Rao, T. N., Sato, O., Fujishima, A., Watanabe, H., Nakamori, T., & Uragami, M. (2003) · Langmuir · doi:10.1021/la026832n · Cited by 344
Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells
Rong, Y., Tang, Z., Zhao, Y., Zhong, X., Venkatesan, S., Graham, H., Patton, M., Jing, Y., Guloy, A. M., & Yao, Y. (2015) · Nanoscale · doi:10.1039/c5nr02866c · Cited by 343
Self-citationImprovement of efficiency of dye-sensitized solar cells by reduction of internal resistance
Han, L., Koide, N., Chiba, Y., Islam, A., Komiya, R., Fuke, N., Fukui, A., & Yamanaka, R. (2005) · Applied Physics Letters · doi:10.1063/1.1925773 · Cited by 341
Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Chen, W., Wu, Y., Liu, J., Qin, C., Yang, X., Islam, A., Cheng, Y.-B., & Han, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02833c · Cited by 319
Double‐Layered NiO Photocathodes for p‐Type DSSCs with Record IPCE
Li, L., Gibson, E. A., Qin, P., Boschloo, G., Gorlov, M., Hagfeldt, A., & Sun, L. (2010) · Advanced Materials · doi:10.1002/adma.200903151 · Cited by 315
Bisquert, J., Fabregat-Santiago, F., Mora-Seró, I., Garcia-Belmonte, G., Barea, E. M., & Palomares, E. (2008) · Inorganica Chimica Acta · doi:10.1016/j.ica.2007.05.032 · Cited by 299
Depletion region effect of highly efficient hole conductor free CH3NH3PbI3perovskite solar cells
Aharon, S., Gamliel, S., Cohen, B. E., & Etgar, L. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00460d · Cited by 285
Chloride in Lead Chloride-Derived Organo-Metal Halides for Perovskite-Absorber Solar Cells
Unger, E. L., Bowring, A. R., Tassone, C. J., Pool, V. L., Gold-Parker, A., Cheacharoen, R., Stone, K. H., Hoke, E. T., Toney, M. F., & McGehee, M. D. (2014) · Chemistry of Materials · doi:10.1021/cm503828b · Cited by 281
Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
Raga, S. R., Jung, M.-C., Lee, M. V., Leyden, M. R., Kato, Y., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm5041997 · Cited by 280
Review of stability for advanced dye solar cells
Asghar, M. I., Miettunen, K., Halme, J., Vahermaa, P., Toivola, M., Aitola, K., & Lund, P. (2010) · Energy & Environmental Science · doi:10.1039/b922801b · Cited by 277
Charge collection and pore filling in solid-state dye-sensitized solar cells
Snaith, H. J., Humphry-Baker, R., Chen, P., Cesar, I., Zakeeruddin, S. M., & Grätzel, M. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/42/424003 · Cited by 258
Wu, J., Hao, S., Lan, Z., Lin, J., Huang, M., Huang, Y., Li, P., Yin, S., & Sato, T. (2008) · Journal of the American Chemical Society · doi:10.1021/ja802158q · Cited by 252
Egger, D. A., & Kronik, L. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5012934 · Cited by 249
The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells
Zhang, L., Liu, T., Liu, L., Hu, M., Yang, Y., Mei, A., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04647a · Cited by 241
Self-citationRong, Y., Ku, Z., Mei, A., Liu, T., Xu, M., Ko, S., Li, X., & Han, H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500833z · Cited by 241
Self-citationKrüger, J., Plass, R., Grätzel, M., & Matthieu, H.-J. (2002) · Applied Physics Letters · doi:10.1063/1.1490394 · Cited by 227
Efficiency improvement in solid-state-dye-sensitized photovoltaics with an amphiphilic Ruthenium-dye
Schmidt-Mende, L., Zakeeruddin, S. M., & Grätzel, M. (2005) · Applied Physics Letters · doi:10.1063/1.1844032 · Cited by 215
Hu, M., Liu, L., Mei, A., Yang, Y., Liu, T., & Han, H. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03741c · Cited by 207
Self-citationMatteocci, F., Razza, S., Di Giacomo, F., Casaluci, S., Mincuzzi, G., Brown, T. M., D'Epifanio, A., Licoccia, S., & Di Carlo, A. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp55313b · Cited by 182
Reproducible manufacturing of dye‐sensitized solar cells on a semi‐automated baseline
Späth, M., Sommeling, P. M., van Roosmalen, J. A. M., Smit, H. J. P., van der Burg, N. P. G., Mahieu, D. R., Bakker, N. J., & Kroon, J. M. (2003) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.481 · Cited by 179
Long-term stability of dye solar cells
Harikisun, R., & Desilvestro, H. (2011) · Solar Energy · doi:10.1016/j.solener.2010.10.016 · Cited by 172
The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell
Yang, Y., Ri, K., Mei, A., Liu, L., Hu, M., Liu, T., Li, X., & Han, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07030e · Cited by 168
Self-citationHodes, G., & Cahen, D. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.5 · Cited by 159
Inorganic p-type contact materials for perovskite-based solar cells
Li, M.-H., Shen, P.-S., Wang, K.-C., Guo, T.-F., & Chen, P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06425a · Cited by 158
Design of DSC panel with efficiency more than 6%
Dai, S., Wang, K., Weng, J., et al. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.10.001 · Cited by 137
Novel Photoelectrochemical Cell with Mesoscopic Electrodes Sensitized by Lead-Halide Compounds (2)
Kojima, A., Teshima, K., Miyasaka, T., & Shirai, Y. (2006) · ECS Meeting Abstracts · doi:10.1149/ma2006-02/7/397 · Cited by 135
Recent trends in mesoscopic solar cells based on molecular and nanopigment light harvesters
Grätzel, C. K., & Zakeeruddin, S. M. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.020 · Cited by 134
High efficiency photovoltaic module based on mesoscopic organometal halide perovskite
Matteocci, F., Cinà, L., Giacomo, F. D., Razza, S., Palma, A. L., Guidobaldi, A., D’Epifanio, A., Licoccia, S., Brown, T. M., Reale, A., et al. (2014) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2557 · Cited by 126
Wang, H., Zhang, X., Gong, F., Zhou, G., & Wang, Z. (2011) · Advanced Materials · doi:10.1002/adma.201103785 · Cited by 122
Long-term stability of low-power dye-sensitised solar cells prepared by industrial methods
Pettersson, H., & Gruszecki, T. (2001) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(01)00025-3 · Cited by 111
p-T phase relations of CH3NH3PbX3 (X = Cl, Br, I) crystals
Onoda‐Yamamuro, N., Yamamuro, O., Matsuo, T., & Suga, H. (1992) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(92)90056-j · Cited by 106
Evaluation of moisture ingress from the perimeter of photovoltaic modules
Kempe, M., Dameron, A. A., & Reese, M. O. (2013) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2374 · Cited by 102
Benavides-Garcia, M., & Balasubramanian, K. (1994) · The Journal of Chemical Physics · doi:10.1063/1.466476 · Cited by 94
Highly ordered mesoporous carbon for mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cell
Xu, M., Rong, Y., Ku, Z., Mei, A., Liu, T., Zhang, L., Li, X., & Han, H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00379a · Cited by 93
Self-citationThe design and outdoor application of dye-sensitized solar cells
Dai, S., Weng, J., Sui, Y., Chen, S., Xiao, S., Huang, Y., Kong, F., Pan, X., Hu, L., Zhang, C., et al. (2007) · Inorganica Chimica Acta · doi:10.1016/j.ica.2007.04.018 · Cited by 69
Rong, Y., Ku, Z., Xu, M., et al. (2014) · RSC Advances · doi:10.1039/c3ra47084a · Cited by 24
Self-citation
Cited by
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
A Eu 3+ -Eu 2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Wang, L., Zhou, H., Hu, J., Huang, B., Sun, M., Dong, B., Zheng, G., Huang, Y., Chen, Y., Li, L., et al. (2019) · Science · doi:10.1126/science.aau5701 · Cited by 1,093
Stability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
Metadata
- Authors
- Rong, Y., Liu, L., Mei, A., Li, X., & Han, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-09-24
- Volume
- 5
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2128129463
- Cited by
- 473
- References
- 119
- FWCI
- 33.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.