The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High‐Performance Lithium‐Sulfur Batteries with a Self‐Supported, 3D Li2S‐Doped Graphene Aerogel Cathodes
Abstract
Lithium‐sulfur (Li‐S) batteries are being considered as the next‐generation high‐energy‐storage system due to their high theoretical energy density. However, the use of a lithium‐metal anode poses serious safety concerns due to lithium dendrite formation, which causes short‐circuiting, and possible explosions of the cell. One feasible way to address this issue is to pair a fully lithiated lithium sulfide (Li 2 S) cathode with lithium metal‐free anodes. However, bulk Li 2 S particles face the challenges of having a large activation barrier during the initial charge, low active‐material utilization, poor electrical conductivity, and fast capacity fade, preventing their practical utility. Here, the development of a self‐supported, high capacity, long‐life cathode material is presented for Li‐S batteries by coating Li 2 S onto doped graphene aerogels via a simple liquid infiltration–evaporation coating method. The resultant cathodes are able to lower the initial charge voltage barrier and attain a high specific capacity, good rate capability, and excellent cycling stability. The improved performance can be attributed to the (i) cross‐linked, porous graphene network enabling fast electron/ion transfer, (ii) coated Li 2 S on graphene with high utilization and a reduced energy barrier, and (iii) doped heteroatoms with a strong binding affinity toward Li 2 S/lithium polysulfides with reduced polysulfide dissolution based on first‐principles calculations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Cited by
Conversion cathodes for rechargeable lithium and lithium-ion batteries
Wu, F., & Yushin, G. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02326f · Cited by 723
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
The Regulating Role of Carbon Nanotubes and Graphene in Lithium‐Ion and Lithium–Sulfur Batteries
Fang, R., Chen, K., Yin, L., Sun, Z., Li, F., & Cheng, H. (2019) · Advanced Materials · doi:10.1002/adma.201800863 · Cited by 617
A review on the status and challenges of electrocatalysts in lithium-sulfur batteries
He, J., & Manthiram, A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.04.038 · Cited by 479
Self-citationDensity Functional Theory for Battery Materials
He, Q., Yu, B., Li, Z., & Zhao, Y. (2019) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12056 · Cited by 463
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
Holey 2D Nanomaterials for Electrochemical Energy Storage
Peng, L., Fang, Z., Zhu, Y., Yan, C., & Yu, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702179 · Cited by 356
A review on theoretical models for lithium–sulfur battery cathodes
Feng, S., Fu, Z., Chen, X., & Zhang, Q. (2022) · InfoMat · doi:10.1002/inf2.12304 · Cited by 354
Chen, T., Ma, L., Cheng, B., Chen, R., Hu, Y., Zhu, G., Wang, Y., Liang, J., Tie, Z., Liu, J., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.064 · Cited by 334
Pei, F., Lin, L., Ou, D., Zheng, Z., Mo, S., Fang, X., & Zheng, N. (2017) · Nature Communications · doi:10.1038/s41467-017-00575-8 · Cited by 324
Zhang, J., Shi, Y., Ding, Y., Peng, L., Zhang, W., & Yu, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602876 · Cited by 315
Single-atom catalyst boosts electrochemical conversion reactions in batteries
Wang, J., Jia, L., Zhong, J., Xiao, Q., Wang, C., Zang, K., Liu, H., Zheng, H., Luo, J., Yang, J., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.09.006 · Cited by 315
He, J., Chen, Y., Lv, W., Wen, K., Xu, C., Zhang, W., Li, Y., Qin, W., & He, W. (2016) · ACS Nano · doi:10.1021/acsnano.6b05696 · Cited by 305
Yuan, H., Chen, X., Zhou, G., Zhang, W., Luo, J., Huang, H., Gan, Y., Liang, C., Xia, Y., Zhang, J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00465 · Cited by 296
Self-citationNanostructured positive electrode materials for post-lithium ion batteries
Wang, F., Wu, X., Li, C., Zhu, Y., Fu, L., Wu, Y., & Liu, X. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02070d · Cited by 293
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Self-citationCathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
3D Graphene‐Based Macrostructures for Water Treatment
Wang, H., Mi, X., Li, Y., & Zhan, S. (2020) · Advanced Materials · doi:10.1002/adma.201806843 · Cited by 279
Hierarchical Structures Based on Two‐Dimensional Nanomaterials for Rechargeable Lithium Batteries
Cong, L., Xie, H., & Li, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601906 · Cited by 261
A review of biomass materials for advanced lithium–sulfur batteries
Yuan, H., Liu, T., Liu, Y., Nai, J., Wang, Y., Zhang, W., & Tao, X. (2019) · Chemical Science · doi:10.1039/c9sc02743b · Cited by 259
He, J., Chen, Y., Lv, W., Wen, K., Xu, C., Zhang, W., Qin, W., & He, W. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00272 · Cited by 172
Graphene-based wearable sensors
Qiao, Y., Li, X., Hirtz, T., Deng, G., Wei, Y., Li, M., Ji, S., Wu, Q., Jian, J., Wu, F., et al. (2019) · Nanoscale · doi:10.1039/c9nr05532k · Cited by 158
Aerogels: Promising Nanostructured Materials for Energy Conversion and Storage Applications
Alwin, S., & Sahaya Shajan, X. (2020) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-020-00168-4 · Cited by 157
Metadata
- Authors
- Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-11-16
- Volume
- 6
- Issue
- 2
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2200133427
- Cited by
- 205
- References
- 1
- FWCI
- 15.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.