The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Highly Flexible, Freestanding Supercapacitor Electrode with Enhanced Performance Obtained by Hybridizing Polypyrrole Chains with MXene
Abstract
Though polypyrrole (PPy) is widely used in flexible supercapacitors owing to its high electrochemical activity and intrinsic flexibility, limited capacitance and cycling stability of freestanding PPy films greatly reduce their practicality in real‐world applications. Herein, we report a new approach to enhance PPy's capacitance and cycling stability by forming a freestanding and conductive hybrid film through intercalating PPy into layered Ti 3 C 2 (l‐Ti 3 C 2, a MXene material). The capacitance increases from 150 (300) to 203 mF cm−2 (406 F cm−3). Moreover, almost 100% capacitance retention is achieved, even after 20 000 charging/discharging cycles. The analyses reveal that l‐Ti 3 C 2 effectively prevents dense PPy stacking, benefiting the electrolyte infiltration. Furthermore, strong bonds, formed between the PPy backbones and surfaces of l‐Ti 3 C 2, not only ensure good conductivity and provide precise pathways for charge‐carrier transport but also improve the structural stability of PPy backbones. The freestanding PPy/l‐Ti 3 C 2 film is further used to fabricate an ultra‐thin all‐solid‐state supercapacitor, which shows an excellent capacitance (35 mF cm−2), stable performance at any bending state and during 10 000 charging/discharging cycles. This novel strategy provides a new way to design conductive polymer‐based freestanding flexible electrodes with greatly improved electrochemical performances.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Electrochemical Capacitors for Energy Management
Miller, J. R., & Simon, P. (2008) · Science · doi:10.1126/science.1158736 · Cited by 4,831
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance
Zhao, M., Ren, C. E., Ling, Z., Lukatskaya, M. R., Zhang, C., Van Aken, K. L., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404140 · Cited by 1,426
Electrochemistry of Conducting Polymers—Persistent Models and New Concepts
Heinze, J., Frontana-Uribe, B. A., & Ludwigs, S. (2010) · Chemical Reviews · doi:10.1021/cr900226k · Cited by 1,258
Boota, M., Anasori, B., Voigt, C., Zhao, M., Barsoum, M. W., & Gogotsi, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504705 · Cited by 1,114
Polyaniline and Polypyrrole Pseudocapacitor Electrodes with Excellent Cycling Stability
Liu, T., Finn, L., Yu, M., Wang, H., Zhai, T., Lu, X., Tong, Y., & Li, Y. (2014) · Nano Letters · doi:10.1021/nl500255v · Cited by 823
Cited by
Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Zhao, S., Zhang, H.-B., Luo, J.-Q., Wang, Q.-W., Xu, B., Hong, S., & Yu, Z.-Z. (2018) · ACS Nano · doi:10.1021/acsnano.8b05739 · Cited by 893
2D Transition Metal Carbides (MXenes): Applications as an Electrically Conducting Material
Shahzad, F., Iqbal, A., Kim, H., & Koo, C. M. (2020) · Advanced Materials · doi:10.1002/adma.202002159 · Cited by 451
Multivalent metal ion hybrid capacitors: a review with a focus on zinc-ion hybrid capacitors
Dong, L., Yang, W., Yang, W., Li, Y., Wu, W., & Wang, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02678a · Cited by 438
2D/2D 1T‐MoS2/Ti3C2 MXene Heterostructure with Excellent Supercapacitor Performance
Wang, X., Li, H., Li, H., Lin, S., Ding, W., Zhu, X., Sheng, Z., Wang, H., Zhu, X., & Sun, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910302 · Cited by 435
Self-citationRational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
Recent advances and challenges of electrode materials for flexible supercapacitors
Zhang, Y., Mei, H.-X., Cao, Y., Yan, X.-H., Yan, J., Gao, H.-L., Luo, H.-W., Wang, S.-W., Jia, X.-D., Kachalova, L., et al. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.213910 · Cited by 339
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
Dong, W., Xie, M., Zhao, S., Qin, Q., & Huang, F. (2023) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100713 · Cited by 319
Chemical supercapacitors: a review focusing on metallic compounds and conducting polymers
Naskar, P., Maiti, A., Chakraborty, P., Kundu, D., Biswas, B., & Banerjee, A. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09655e · Cited by 303
Luo, J., Zheng, J., Nai, J., Jin, C., Yuan, H., Sheng, O., Liu, Y., Fang, R., Zhang, W., Huang, H., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808107 · Cited by 292
Du, C., Dinh, K. N., Liang, Q., Zheng, Y., Luo, Y., Zhang, J., & Yan, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801127 · Cited by 274
Multi-functional Flexible Aqueous Sodium-Ion Batteries with High Safety
Guo, Z., Zhao, Y., Ding, Y., Dong, X., Chen, L., Cao, J., Wang, C., Xia, Y., Peng, H., & Wang, Y. (2017) · Chem · doi:10.1016/j.chempr.2017.05.004 · Cited by 267
Mahmood, M., Rasheed, A., Ayman, I., Rasheed, T., Munir, S., Ajmal, S., Agboola, P. O., Warsi, M. F., & Shahid, M. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03939 · Cited by 253
Engineering 2D Architectures toward High‐Performance Micro‐Supercapacitors
Da, Y., Liu, J., Zhou, L., Zhu, X., Chen, X., & Fu, L. (2019) · Advanced Materials · doi:10.1002/adma.201802793 · Cited by 253
Metadata
- Authors
- Zhu, M., Huang, Y., Deng, Q., Zhou, J., Pei, Z., Xue, Q., Huang, Y., Wang, Z., Li, H., Huang, Q., & Zhi, C.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-08-05
- Volume
- 6
- Issue
- 21
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2479135428
- Cited by
- 731
- References
- 39
- FWCI
- 22.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.