The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Active Edge Sites Engineering in Nickel Cobalt Selenide Solid Solutions for Highly Efficient Hydrogen Evolution
Abstract
An effective multifaceted strategy is demonstrated to increase active edge site concentration in Ni 0.33 Co 0.67 Se 2 solid solutions prepared by in situ selenization process of nickel cobalt precursor. The simultaneous control of surface, phase, and morphology result in as‐prepared ternary solid solution with extremely high electrochemically active surface area (Cdl = 197 mF cm−2), suggesting significant exposure of active sites in this ternary compound. Coupled with metallic‐like electrical conductivity and lower free energy for atomic hydrogen adsorption in Ni 0.33 Co 0.67 Se 2, identified by temperature‐dependent conductivities and density functional theory calculations, the authors have achieved unprecedented fast hydrogen evolution kinetics, approaching that of Pt. Specifically, the Ni 0.33 Co 0.67 Se 2 solid solutions show a low overpotential of 65 mV at −10 mV cm−2, with onset potential of mere 18 mV, an impressive small Tafel slope of 35 mV dec−1, and a large exchange current density of 184 µA cm−2 in acidic electrolyte. Further, it is shown that the as‐prepared Ni 0.33 Co 0.67 Se 2 solid solution not only works very well in acidic electrolyte but also delivers exceptional hydrogen evolution reaction (HER) performance in alkaline media. The outstanding HER performance makes this solid solution a promising candidate for mass hydrogen production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kibsgaard, J., Chen, Z., Reinecke, B. N., & Jaramillo, T. F. (2012) · Nature Materials · doi:10.1038/nmat3439 · Cited by 3,234
Tian, J., Liu, Q., Asiri, A. M., & Sun, X. (2014) · Journal of the American Chemical Society · doi:10.1021/ja503372r · Cited by 2,373
Kong, D., Wang, H., Lu, Z., & Cui, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja501497n · Cited by 1,392
High-Performance Electrocatalysis Using Metallic Cobalt Pyrite (CoS2) Micro- and Nanostructures
Faber, M. S., Dziedzic, R., Lukowski, M. A., Kaiser, N. S., Ding, Q., & Jin, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504099w · Cited by 1,372
Low Overpotential in Vacancy-Rich Ultrathin CoSe2 Nanosheets for Water Oxidation
Liu, Y., Cheng, H., Lyu, M., Fan, S., Liu, Q., Zhang, W., Zhi, Y., Wang, C., Xiao, C., Wei, S., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5085157 · Cited by 1,094
Liang, H., Meng, F., Cabán-Acevedo, M., Li, L., Forticaux, A., Xiu, L., Wang, Z., & Jin, S. (2015) · Nano Letters · doi:10.1021/nl504872s · Cited by 987
Self-citationTuning the MoS 2 Edge-Site Activity for Hydrogen Evolution via Support Interactions
Tsai, C., Abild-Pedersen, F., & Nørskov, J. K. (2014) · Nano Letters · doi:10.1021/nl404444k · Cited by 760
Selenide‐Based Electrocatalysts and Scaffolds for Water Oxidation Applications
Xia, C., Jiang, Q., Zhao, C., Hedhili, M. N., & Alshareef, H. N. (2016) · Advanced Materials · doi:10.1002/adma.201503906 · Cited by 614
Self-citationUltrathin MoS2(1–x)Se2 x Alloy Nanoflakes For Electrocatalytic Hydrogen Evolution Reaction
Gong, Q., Cheng, L., Liu, C., Zhang, M., Feng, Q., Ye, H., Zeng, M., Xie, L., Liu, Z., & Li, Y. (2015) · ACS Catalysis · doi:10.1021/cs501970w · Cited by 535
Zhang, H., Yang, B., Wu, X., Li, Z., Lei, L., & Zhang, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507373g · Cited by 278
CoSe2 Nanowires Array as a 3D Electrode for Highly Efficient Electrochemical Hydrogen Evolution
Liu, Q., Shi, J., Hu, J., Asiri, A. M., Luo, Y., & Sun, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509185x · Cited by 188
Selenium‐Enriched Nickel Selenide Nanosheets as a Robust Electrocatalyst for Hydrogen Generation
Wang, F., Li, Y., Shifa, T. A., Liu, K., Wang, F., Wang, Z., Xu, P., Wang, Q., & He, J. (2016) · Angewandte Chemie · doi:10.1002/ange.201602802 · Cited by 68
Cited by
Ouyang, T., Ye, Y., Wu, C., Xiao, K., & Liu, Z. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201814262 · Cited by 804
Fe-Based Electrocatalysts for Oxygen Evolution Reaction: Progress and Perspectives
Feng, C., Faheem, M. B., Fu, J., Xiao, Y., Li, C., & Li, Y. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b05445 · Cited by 587
Peng, X., Yan, Y., Jin, X., Huang, C., Jin, W., Gao, B., & Chu, P. K. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105234 · Cited by 450
2D Metallic Transition‐Metal Dichalcogenides: Structures, Synthesis, Properties, and Applications
Zhao, B., Shen, D., Zhang, Z., Lu, P., Hossain, M., Li, J., Li, B., & Duan, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105132 · Cited by 359
Wu, Y., Li, Y., Gao, J., & Zhang, Q. (2021) · SusMat · doi:10.1002/sus2.3 · Cited by 319
Metadata
- Authors
- Xia, C., Liang, H., Zhu, J., Schwingenschlögl, U., & Alshareef, H. N.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-01-06
- Volume
- 7
- Issue
- 9
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2570266091
- Cited by
- 199
- References
- 12
- FWCI
- 8.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.