The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Improved Optics in Monolithic Perovskite/Silicon Tandem Solar Cells with a Nanocrystalline Silicon Recombination Junction
Open accessAbstract
Perovskite/silicon tandem solar cells are increasingly recognized as promising candidates for next‐generation photovoltaics with performance beyond the single‐junction limit at potentially low production costs. Current designs for monolithic tandems rely on transparent conductive oxides as an intermediate recombination layer, which lead to optical losses and reduced shunt resistance. An improved recombination junction based on nanocrystalline silicon layers to mitigate these losses is demonstrated. When employed in monolithic perovskite/silicon heterojunction tandem cells with a planar front side, this junction is found to increase the bottom cell photocurrent by more than 1 mA cm−2. In combination with a cesium‐based perovskite top cell, this leads to tandem cell power‐conversion efficiencies of up to 22.7% obtained from J–V measurements and steady‐state efficiencies of up to 22.0% during maximum power point tracking. Thanks to its low lateral conductivity, the nanocrystalline silicon recombination junction enables upscaling of monolithic perovskite/silicon heterojunction tandem cells, resulting in a 12.96 cm 2 monolithic tandem cell with a steady‐state efficiency of 18%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Self-citationYoshikawa, K., Kawasaki, H., Yoshida, W., Irie, T., Konishi, K., Nakano, K., Uto, T., Adachi, D., Kanematsu, M., Uzu, H., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.32 · Cited by 2,692
The quantitative analysis of thin specimens
Cliff, G., & Lorimer, G. W. (1975) · Journal of Microscopy · doi:10.1111/j.1365-2818.1975.tb03895.x · Cited by 1,844
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Kim, H., Gilmore, C. M., Piqué, A., Horwitz, J. S., Mattoussi, H., Murata, H., Kafafi, Z. H., & Chrisey, D. B. (1999) · Journal of Applied Physics · doi:10.1063/1.371708 · Cited by 1,291
Photovoltaic Technology: The Case for Thin-Film Solar Cells
Shah, A., Torres, P., Tscharner, R., Wyrsch, N., & Keppner, H. (1999) · Science · doi:10.1126/science.285.5428.692 · Cited by 1,267
Cited by
Sahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Self-citationOpportunities and challenges for tandem solar cells using metal halide perovskite semiconductors
Leijtens, T., Bush, K. A., Prasanna, R., & McGehee, M. D. (2018) · Nature Energy · doi:10.1038/s41560-018-0190-4 · Cited by 1,121
Lin, R., Xiao, K., Qin, Z., Han, Q., Zhang, C., Wei, M., Saidaminov, M. I., Gao, Y., Xu, J., Xiao, M., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0466-3 · Cited by 1,073
Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
Kim, D., Jung, H. J., Park, I. J., Larson, B. W., Dunfield, S. P., Xiao, C., Kim, J., Tong, J., Boonmongkolras, P., Ji, S. G., et al. (2020) · Science · doi:10.1126/science.aba3433 · Cited by 611
Interface passivation for 31.25%-efficient perovskite/silicon tandem solar cells
Chin, X. Y., Turkay, D., Steele, J. A., Tabean, S., Eswara, S., Mensi, M., Fiala, P., Wolff, C. M., Paracchino, A., Artuk, K., et al. (2023) · Science · doi:10.1126/science.adg0091 · Cited by 526
Self-citationPerovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Highly Efficient Thermally Co-evaporated Perovskite Solar Cells and Mini-modules
Li, J., Wang, H., Chin, X. Y., Dewi, H. A., Vergeer, K., Goh, T. W., Lim, J. W. M., Lew, J. H., Loh, K. P., Soci, C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.03.005 · Cited by 378
Aydin, E., Allen, T. G., De Bastiani, M., Xu, L., Ávila, J., Salvador, M., Van Kerschaver, E., & De Wolf, S. (2020) · Nature Energy · doi:10.1038/s41560-020-00687-4 · Cited by 325
Self-citationHigh-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications
Liu, Y., Li, Y., Wu, Y., Yang, G., Mazzarella, L., Procel-Moya, P., Tamboli, A. C., Weber, K., Boccard, M., Isabella, O., et al. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100579 · Cited by 293
Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5061809 · Cited by 281
Impact of Surfaces on Photoinduced Halide Segregation in Mixed-Halide Perovskites
Belisle, R. A., Bush, K. A., Bertoluzzi, L., Gold-Parker, A., Toney, M. F., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01562 · Cited by 275
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Recent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Metadata
- Authors
- Sahli, F., Kamino, B. A., Werner, J., Bräuninger, M., Paviet‐Salomon, B., Barraud, L., Monnard, R., Seif, J. P., Tomasi, A., Jeangros, Q., Hessler‐Wyser, A., De Wolf, S., Despeisse, M., Nicolay, S., Niesen, B., & Ballif, C.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-10-09
- Volume
- 8
- Issue
- 6
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2764192968
- Cited by
- 263
- References
- 25
- FWCI
- 10.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.