The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency
Open accessAbstract
The low power conversion efficiency (PCE) of tin‐based hybrid perovskite solar cells (HPSCs) is mainly attributed to the high background carrier density due to a high density of intrinsic defects such as Sn vacancies and oxidized species (Sn 4+) that characterize Sn‐based HPSCs. Herein, this study reports on the successful reduction of the background carrier density by more than one order of magnitude by depositing near‐single‐crystalline formamidinium tin iodide (FASnI 3) films with the orthorhombic a‐axis in the out‐of‐plane direction. Using these highly crystalline films, obtained by mixing a very small amount (0.08 m) of layered (2D) Sn perovskite with 0.92 m (3D) FASnI 3, for the first time a PCE as high as 9.0% in a planar p–i–n device structure is achieved. These devices display negligible hysteresis and light soaking, as they benefit from very low trap‐assisted recombination, low shunt losses, and more efficient charge collection. This represents a 50% improvement in PCE compared to the best reference cell based on a pure FASnI 3 film using SnF 2 as a reducing agent. Moreover, the 2D/3D‐based HPSCs show considerable improved stability due to the enhanced robustness of the perovskite film compared to the reference cell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Tress, W., Marinova, N., Moehl, T., Zakeeruddin, S. M., Nazeeruddin, M. K., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03664f · Cited by 1,381
Unger, E. L., Hoke, E. T., Bailie, C. D., Nguyen, W. H., Bowring, A. R., Heumüller, T., Christoforo, M. G., & McGehee, M. D. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02465f · Cited by 1,265
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells
Beal, R. E., Slotcavage, D. J., Leijtens, T., Bowring, A. R., Belisle, R. A., Nguyen, W. H., Burkhard, G. F., Hoke, E. T., & McGehee, M. D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00002 · Cited by 1,136
Liao, Y., Liu, H., Zhou, W., Yang, D., Shang, Y., Shi, Z., Li, B., Jiang, X., Zhang, L., Quan, L. N., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01815 · Cited by 877
Lee, S. J., Shin, S. S., Kim, Y. C., Kim, D., Ahn, T. K., Noh, J. H., Seo, J., & Seok, S. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00142 · Cited by 817
Liao, W., Zhao, D., Yu, Y., Grice, C. R., Wang, C., Cimaroli, A. J., Schulz, P., Meng, W., Zhu, K., Xiong, R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602992 · Cited by 793
Probing surface and interface morphology with Grazing Incidence Small Angle X-Ray Scattering
Renaud, G., Lazzari, R., & Leroy, F. (2009) · Surface Science Reports · doi:10.1016/j.surfrep.2009.07.002 · Cited by 756
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie · doi:10.1002/ange.201406466 · Cited by 684
Enhanced stability and efficiency in hole-transport-layer-free CsSnI3 perovskite photovoltaics
Marshall, K. P., Walker, M., Walton, R. I., & Hatton, R. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.178 · Cited by 644
Self‐Regulation Mechanism for Charged Point Defects in Hybrid Halide Perovskites
Walsh, A., Scanlon, D. O., Chen, S., Gong, X. G., & Wei, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409740 · Cited by 621
A critical review on tin halide perovskite solar cells
Konstantakou, M., & Stergiopoulos, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00929a · Cited by 600
Importance of Reducing Vapor Atmosphere in the Fabrication of Tin-Based Perovskite Solar Cells
Song, T.-B., Yokoyama, T., Stoumpos, C. C., Logsdon, J., Cao, D. H., Wasielewski, M. R., Aramaki, S., & Kanatzidis, M. G. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10734 · Cited by 598
Yun, J. S., Seidel, J., Kim, J., Soufiani, A. M., Huang, S., Lau, J., Jeon, N. J., Seok, S. I., Green, M. A., & Ho‐Baillie, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600330 · Cited by 472
Cao, D. H., Stoumpos, C. C., Yokoyama, T., Logsdon, J. L., Song, T.-B., Farha, O. K., Wasielewski, M. R., Hupp, J. T., & Kanatzidis, M. G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00202 · Cited by 399
Heterojunction‐Depleted Lead‐Free Perovskite Solar Cells with Coarse‐Grained B‐γ‐CsSnI3 Thin Films
Wang, N., Zhou, Y., Ju, M., Garces, H. F., Ding, T., Pang, S., Zeng, X. C., Padture, N. P., & Sun, X. W. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601130 · Cited by 342
Xu, P., Chen, S., Xiang, H.-J., Gong, X.-G., & Wei, S.-H. (2014) · Chemistry of Materials · doi:10.1021/cm503122j · Cited by 338
Chen, Z., Yu, C., Shum, K., Wang, J. J., Pfenninger, W. M., Vockic, N., Midgley, J., & Kenney, J. T. (2011) · Journal of Luminescence · doi:10.1016/j.jlumin.2011.09.006 · Cited by 257
Native Defect‐Induced Hysteresis Behavior in Organolead Iodide Perovskite Solar Cells
Yu, H., Lu, H., Xie, F., Zhou, S., & Zhao, N. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504997 · Cited by 254
Temperature dependence of the band gap of perovskite semiconductor compound CsSnI3
Yu, C., Chen, Z., J. Wang, J., Pfenninger, W., Vockic, N., Kenney, J. T., & Shum, K. (2011) · Journal of Applied Physics · doi:10.1063/1.3638699 · Cited by 244
Marshall, K. P., Walton, R. I., & Hatton, R. A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02950c · Cited by 213
Shao, S., Abdu-Aguye, M., Qiu, L., Lai, L.-H., Liu, J., Adjokatse, S., Jahani, F., Kamminga, M. E., ten Brink, G. H., Palstra, T. T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01337f · Cited by 186
Self-citationShao, S., Abdu‐Aguye, M., Sherkar, T. S., Fang, H., Adjokatse, S., ten Brink, G. H., Kooi, B. J., Koster, L. J. A., & Loi, M. A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602519 · Cited by 139
Self-citation
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives
Xiao, Z., Song, Z., & Yan, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803792 · Cited by 1,090
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Metadata
- Authors
- Shao, S., Liu, J., Portale, G., Fang, H., Blake, G. R., ten Brink, G. H., Koster, L. J. A., & Loi, M. A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-09-22
- Volume
- 8
- Issue
- 4
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2760629443
- Cited by
- 904
- References
- 30
- FWCI
- 39.16
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.