The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Low‐Defect and Low‐Porosity Hard Carbon with High Coulombic Efficiency and High Capacity for Practical Sodium Ion Battery Anode
Abstract
Hard carbon is regarded as the most promising anode material for commercialization of Na ion batteries because of its high capacity and low cost. At present, the practical utilization of hard carbon anodes is largely limited by the low initial Coulombic efficiency (ICE). Na ions have been found to adopt an adsorption–insertion storage mechanism. In this paper a systematic way to control the defect concentration and porosity of hard carbon with similar overall architectures is shown. This study elucidates that the defects in the graphite layers are directly related to the ICE as they would trap Na ions and create a repulsive electric field for other Na ions so as to shorten the low‐voltage intercalation capacity. The obtained low defect and porosity hard carbon electrode has achieved the highest ICE of 86.1% (94.5% for pure hard carbon material by subtracting that of the conductive carbon black), reversible capacity of 361 mA h g−1, and excellent cycle stability (93.4% of capacity retention over 100 cycles). This result sheds light on feasible design principles for high performance Na storage hard carbon: suitable carbon layer distance and defect free graphitic layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Self-citationPrussian blue: a new framework of electrode materials for sodium batteries
Lu, Y., Wang, L., Cheng, J., & Goodenough, J. B. (2012) · Chemical Communications · doi:10.1039/c2cc31777j · Cited by 1,162
High-power lithium batteries from functionalized carbon-nanotube electrodes
Lee, S. W., Yabuuchi, N., Gallant, B. M., Chen, S., Kim, B.-S., Hammond, P. T., & Shao-Horn, Y. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.116 · Cited by 1,111
Hollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee44004d · Cited by 1,101
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
High-Power Lithium Batteries from Functionalized Carbon Nanotube Electrodes
Lee, S. W., Yabuuchi, N., Gallant, B., Hammond, P., & Shao-Horn, Y. (2010) · ECS Meeting Abstracts · doi:10.1149/ma2010-02/7/494 · Cited by 868
Challenges for Na-ion Negative Electrodes
Chevrier, V. L., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3607983 · Cited by 862
Xu, Y., Zhu, Y., Liu, Y., & Wang, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200346 · Cited by 847
Peanut shell hybrid sodium ion capacitor with extreme energy–power rivals lithium ion capacitors
Ding, J., Wang, H., Li, Z., Cui, K., Karpuzov, D., Tan, X., Kohandehghan, A., & Mitlin, D. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02986k · Cited by 818
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Liu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
Self-citationLiu, Y., Merinov, B. V., & Goddard, W. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1602473113 · Cited by 667
Xiao, L., Cao, Y., Xiao, J., Wang, W., Kovarik, L., Nie, Z., & Liu, J. (2012) · Chemical Communications · doi:10.1039/c2cc17129e · Cited by 601
Self-citationFang, Y., Xiao, L., Ai, X., Cao, Y., & Yang, H. (2015) · Advanced Materials · doi:10.1002/adma.201502018 · Cited by 549
Self-citationSubzero‐Temperature Cathode for a Sodium‐Ion Battery
You, Y., Yao, H., Xin, S., Yin, Y., Zuo, T., Yang, C., Guo, Y., Cui, Y., Wan, L., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201600846 · Cited by 534
Pan, H., Lu, X., Yu, X., Hu, Y., Li, H., Yang, X., & Chen, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300139 · Cited by 516
Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries
Datta, D., Li, J., & Shenoy, V. B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am404788e · Cited by 421
Hard carbon nanoparticles as high-capacity, high-stability anodic materials for Na-ion batteries
Xiao, L., Cao, Y., Henderson, W. A., Sushko, M. L., Shao, Y., Xiao, J., Wang, W., Engelhard, M. H., Nie, Z., & Liu, J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.10.034 · Cited by 415
Self-citationPredicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
Bommier, C., Luo, W., Gao, W.-Y., Greaney, A., Ma, S., & Ji, X. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.064 · Cited by 372
Luo, W., Schardt, J., Bommier, C., Wang, B., Razink, J., Simonsen, J., & Ji, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12389h · Cited by 364
Jiang, Y., Yang, Z., Li, W., Zeng, L., Pan, F., Wang, M., Wei, X., Hu, G., Gu, L., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402104 · Cited by 362
Facile synthesis of high performance hard carbon anode materials for sodium ion batteries
Sun, N., Liu, H., & Xu, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05118e · Cited by 345
Li, W., Chou, S., Wang, J., Kim, J. H., Liu, H., & Dou, S. (2014) · Advanced Materials · doi:10.1002/adma.201400794 · Cited by 317
Electrospun Na3V2(PO4)3/C nanofibers as stable cathode materials for sodium-ion batteries
Liu, J., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05329f · Cited by 296
Self-citationA Honeycomb‐Layered Na3Ni2SbO6: A High‐Rate and Cycle‐Stable Cathode for Sodium‐Ion Batteries
Yuan, D., Liang, X., Wu, L., Cao, Y., Ai, X., Feng, J., & Yang, H. (2014) · Advanced Materials · doi:10.1002/adma.201401946 · Cited by 295
Self-citationLow-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Luo, W., Bommier, C., Jian, Z., Li, X., Carter, R., Vail, S., Lu, Y., Lee, J.-J., & Ji, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507679x · Cited by 293
First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)3
Song, W., Ji, X., Wu, Z., Zhu, Y., Yang, Y., Chen, J., Jing, M., Li, F., & Banks, C. E. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00230j · Cited by 285
Ab initio study of sodium intercalation into disordered carbon
Tsai, P.-C., Chung, S.-C., Lin, S.-K., & Yamada, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01443c · Cited by 263
Bai, Y., Wang, Z., Wu, C., Xu, R., Wu, F., Liu, Y., Li, H., Li, Y., Lu, J., & Amine, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00861 · Cited by 252
Advanced Cathode Materials for Sodium‐Ion Batteries: What Determines Our Choices?
Dai, Z., Mani, U., Tan, H. T., & Yan, Q. (2017) · Small Methods · doi:10.1002/smtd.201700098 · Cited by 242
Gao, H., Zhou, T., Zheng, Y., Liu, Y., Chen, J., Liu, H., & Guo, Z. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601037 · Cited by 225
Sodium/Lithium Storage Behavior of Antimony Hollow Nanospheres for Rechargeable Batteries
Hou, H., Jing, M., Yang, Y., Zhu, Y., Fang, L., Song, W., Pan, C., Yang, X., & Ji, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504310k · Cited by 202
Meng, D., Zheng, B., Lin, G., & Sushko, M. L. (2014) · Communications in Computational Physics · doi:10.4208/cicp.040913.120514a · Cited by 66
Self-citation
Cited by
Defect Engineering on Electrode Materials for Rechargeable Batteries
Zhang, Y., Tao, L., Xie, C., Wang, D., Zou, Y., Chen, R., Wang, Y., Jia, C., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201905923 · Cited by 1,019
Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective
Chu, Y., Zhang, J., Zhang, Y., Li, Q., Jia, Y., Dong, X., Xiao, J., Tao, Y., & Yang, Q. (2023) · Advanced Materials · doi:10.1002/adma.202212186 · Cited by 602
Huang, H., Xu, R., Feng, Y., Zeng, S., Jiang, Y., Wang, H., Luo, W., & Yu, Y. (2020) · Advanced Materials · doi:10.1002/adma.201904320 · Cited by 529
Understanding of the sodium storage mechanism in hard carbon anodes
Chen, X., Liu, C., Fang, Y., Ai, X., Zhong, F., Yang, H., & Cao, Y. (2022) · Carbon Energy · doi:10.1002/cey2.196 · Cited by 527
Self-citationRevealing the Intercalation Mechanisms of Lithium, Sodium, and Potassium in Hard Carbon
Alvin, S., Cahyadi, H. S., Hwang, J., Chang, W., Kwak, S. K., & Kim, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000283 · Cited by 452
Metadata
- Authors
- Xiao, L., Lu, H., Fang, Y., Sushko, M. L., Cao, Y., Ai, X., Yang, H., & Liu, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-25
- Volume
- 8
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2789724401
- Cited by
- 726
- References
- 43
- FWCI
- 22.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.