The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Flexible, Scalable, and Highly Conductive Garnet‐Polymer Solid Electrolyte Templated by Bacterial Cellulose
Abstract
Solid‐state electrolytes are a promising candidate for the next‐generation lithium‐ion battery, as they have the advantages of eliminating the leakage hazard of liquid solvent and elevating stability. However, inherent limitations such as the low ionic conductivity of solid polymer electrolytes and the high brittleness of inorganic ceramic electrolytes severally impede their practical application. Here, an inexpensive, facile, and scalable strategy to fabricate a hybrid Li 7 La 3 Zr 2 O 12 (LLZO) and poly(ethylene oxide)‐based electrolyte by exploiting bacterial cellulose as a template is reported. The well‐organized LLZO network significantly enhances the ionic conductivity by extending long transport pathways for Li ions, exhibiting an elevated conductivity of 1.12 × 10−4 S cm−1. In addition, the hybrid electrolyte presents a structural flexibility, with minor impedance increase after bending. The facile and applicable approach establishes new principles for the strategy of designing scalable and flexible hybrid polymer electrolytes that can be utilized for high‐energy‐density batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Self-citationElectrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Bacterial cellulose—a masterpiece of nature's arts
Iguchi, M., Yamanaka, S., & Budhiono, A. (2000) · Journal of Materials Science · doi:10.1023/a:1004775229149 · Cited by 1,183
Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires
Liu, W., Lee, S. W., Lin, D., Shi, F., Wang, S., Sendek, A. D., & Cui, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.35 · Cited by 1,103
Self-citationProgress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Ionic Conductivity Enhancement of Polymer Electrolytes with Ceramic Nanowire Fillers
Liu, W., Liu, N., Sun, J., Hsu, P.-C., Li, Y., Lee, H.-W., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00600 · Cited by 1,001
Review on composite polymer electrolytes for lithium batteries
Manuel Stephan, A., & Nahm, K. S. (2006) · Polymer · doi:10.1016/j.polymer.2006.05.069 · Cited by 971
Fu, K. (., Gong, Y., Dai, J., Gong, A., Han, X., Yao, Y., Wang, C., Wang, Y., Chen, Y., Yan, C., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1600422113 · Cited by 930
Self-citationAnomalous High Ionic Conductivity of Nanoporous β-Li3PS4
Liu, Z., Fu, W., Payzant, E. A., Yu, X., Wu, Z., Dudney, N. J., Kiggans, J., Hong, K., Rondinone, A. J., & Liang, C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3110895 · Cited by 879
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Peterson, S. B., Apt, J., & Whitacre, J. F. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.010 · Cited by 799
High Mechanical Strength Double‐Network Hydrogel with Bacterial Cellulose
Nakayama, A., Kakugo, A., Gong, J. P., Osada, Y., Takai, M., Erata, T., & Kawano, S. (2004) · Advanced Functional Materials · doi:10.1002/adfm.200305197 · Cited by 716
Chen, L., Huang, Z., Liang, H., Guan, Q., & Yu, S. (2013) · Advanced Materials · doi:10.1002/adma.201204949 · Cited by 626
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Chen, L., Huang, Z., Liang, H., Gao, H., & Yu, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400590 · Cited by 611
Bacterial cellulose biosynthesis: diversity of operons, subunits, products, and functions
Römling, U., & Galperin, M. Y. (2015) · Trends in Microbiology · doi:10.1016/j.tim.2015.05.005 · Cited by 573
Mechanical properties of bacterial cellulose and interactions with smooth muscle cells
Bäckdahl, H., Helenius, G., Bodin, A., Nannmark, U., Johansson, B. R., Risberg, B., & Gatenholm, P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.026 · Cited by 561
Physical and Chemical Properties of Nanocomposite Polymer Electrolytes
Croce, F., Curini, R., Martinelli, A., Persi, L., Ronci, F., Scrosati, B., & Caminiti, R. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp992307u · Cited by 521
Yang, T., Zheng, J., Cheng, Q., Hu, Y.-Y., & Chan, C. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03806 · Cited by 425
Impedance Spectroscopy Study of PEO-Based Nanocomposite Polymer Electrolytes
Scrosati, B., Croce, F., & Persi, L. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393423 · Cited by 424
Composite polyether based solid electrolytes
Wieczorek, W., Florjanczyk, Z., & Stevens, J. R. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00172-b · Cited by 373
Zhu, Y., Wang, F., Liu, L., Xiao, S., Chang, Z., & Wu, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee23564a · Cited by 368
Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects
Xin, S., You, Y., Wang, S., Gao, H.-C., Yin, Y.-X., & Guo, Y.-G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00175 · Cited by 366
Self-citationPerformance of batteries for electric vehicles on short and longer term
Gerssen-Gondelach, S. J., & Faaij, A. P. C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.085 · Cited by 359
Long, C., Qi, D., Wei, T., Yan, J., Jiang, L., & Fan, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304269 · Cited by 358
Realizing the electric-vehicle revolution
Tran, M., Banister, D., Bishop, J. D. K., & McCulloch, M. D. (2012) · Nature Climate Change · doi:10.1038/nclimate1429 · Cited by 312
Han, X., Ouyang, M., Lu, L., & Li, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.111 · Cited by 302
Impedance study of (PEO)10LiClO4–Al2O3 composite polymer electrolyte with blocking electrodes
Qian, X., Gu, N., Cheng, Z., Yang, X., Wang, E., & Dong, S. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00723-4 · Cited by 299
Miara, L. J., Ong, S. P., Mo, Y., Richards, W. D., Park, Y.-S., Lee, J.-M., Lee, H. S., & Ceder, G. (2013) · Chemistry of Materials · doi:10.1021/cm401232r · Cited by 233
Nishi, Y., Uryu, M., Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., & Mitsuhashi, S. (1990) · Journal of Materials Science · doi:10.1007/bf00584917 · Cited by 232
Modifications of crystalline structure of peo polymer electrolytes with ceramic additives
Wieczorek, W. (1989) · Solid State Ionics · doi:10.1016/0167-2738(89)90185-9 · Cited by 193
Atomic Layer Deposition of the Solid Electrolyte Garnet Li7La3Zr2O12
Kazyak, E., Chen, K.-H., Wood, K. N., Davis, A. L., Thompson, T., Bielinski, A. R., Sanchez, A. J., Wang, X., Wang, C., Sakamoto, J., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00944 · Cited by 177
Juntaro, J., Pommet, M., Kalinka, G., Mantalaris, A., Shaffer, M. S. P., & Bismarck, A. (2008) · Advanced Materials · doi:10.1002/adma.200703176 · Cited by 130
Xiao, S., Wang, F., Yang, Y., Chang, Z., & Wu, Y. (2013) · RSC Advances · doi:10.1039/c3ra46115g · Cited by 128
Electrochemical characteristics of two types of PEO-based composite electrolyte with functional SiO2
Kim, J.-W., Ji, K., Lee, J.-P., & Park, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00263-5 · Cited by 126
Cellulose nanofibril reinforced composite electrolytes for lithium ion battery applications
Willgert, M., Leijonmarck, S., Lindbergh, G., Malmström, E., & Johansson, M. K. G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01139b · Cited by 83
Wang, A., Xu, H., Zhou, Q., Liu, X., Li, Z., Gao, R., Wu, N., Guo, Y., Li, H., & Zhang, L. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.07.003 · Cited by 58
Cited by
Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries
Wang, C., Fu, K., Kammampata, S. P., McOwen, D. W., Samson, A. J., Zhang, L., Hitz, G. T., Nolan, A. M., Wachsman, E. D., Mo, Y., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00427 · Cited by 1,212
Self-citationTailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
Review on Polymer-Based Composite Electrolytes for Lithium Batteries
Yao, P., Yu, H., Ding, Z., Liu, Y., Lu, J., Lavorgna, M., Wu, J., & Liu, X. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00522 · Cited by 494
Metadata
- Authors
- Xie, H., Yang, C., Fu, K. (., Yao, Y., Jiang, F., Hitz, E., Liu, B., Wang, S., & Hu, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-23
- Volume
- 8
- Issue
- 18
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2791715409
- Cited by
- 258
- References
- 48
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.