The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Superwetting Monolithic Hollow‐Carbon‐Nanotubes Aerogels with Hierarchically Nanoporous Structure for Efficient Solar Steam Generation
Abstract
Solar steam generation has been proven to be one of the most efficient approaches for harvesting solar energy for diverse applications such as distillation, desalination, and production of freshwater. Here, the synthesis of monolithic carbon aerogels by facile carbonization of conjugated microporous polymer nanotubes as efficient solar steam generators is reported. The monolithic carbon‐aerogel networks consist of randomly aggregated hollow‐carbon‐nanotubes (HCNTs) with 100–250 nm in diameter and a length of up to several micrometers to form a hierarchically nanoporous network structure. Treatment of the HCNTs aerogels with an ammonium peroxydisulfate/sulfuric acid solution endows their superhydrophilic wettability which is beneficial for rapid transportation of water molecules. In combination with their abundant porosity (92%) with open channel structure, low apparent density (57 mg cm−3), high specific surface area (826 m 2 g−1), low thermal conductivity (0.192 W m−1 K−1), and broad light absorption (99%), an exceptionally high conversion efficiency of 86.8% is achieved under 1 sun irradiation, showing great potential as an efficient photothermal material for solar steam generation. The findings may provide a new opportunity for tailored design and creation of new carbon‐aerogels‐based photothermal materials with adjustable structure, tunable porosity, simple fabrication process, and high solar energy conversion efficiency for solar steam generation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Role of renewable energy sources in environmental protection: A review
Panwar, N. L., Kaushik, S. C., & Kothari, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.037 · Cited by 3,897
Solar steam generation by heat localization
Ghasemi, H., Ni, G., Marconnet, A. M., Loomis, J., Yerci, S., Miljkovic, N., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms5449 · Cited by 2,333
Conjugated microporous polymers: design, synthesis and application
Xu, Y., Jin, S., Xu, H., Nagai, A., & Jiang, D. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60160a · Cited by 1,683
Conjugated Microporous Poly(aryleneethynylene) Networks
Jiang, J., Su, F., Trewin, A., Wood, C. D., Campbell, N. L., Niu, H., Dickinson, C., Ganin, A. Y., Rosseinsky, M. J., Khimyak, Y. Z., et al. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701595 · Cited by 1,465
Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation
Zhou, L., Tan, Y., Ji, D., Zhu, B., Zhang, P., Xu, J., Gan, Q., Yu, Z., & Zhu, J. (2016) · Science Advances · doi:10.1126/sciadv.1501227 · Cited by 1,327
Zhang, P., Li, J., Lv, L., Zhao, Y., & Qu, L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01965 · Cited by 1,081
Conjugated Microporous Polymers
Cooper, A. I. (2009) · Advanced Materials · doi:10.1002/adma.200801971 · Cited by 1,031
Bae, K., Kang, G., Cho, S. K., Park, W., Kim, K., & Padilla, W. J. (2015) · Nature Communications · doi:10.1038/ncomms10103 · Cited by 1,014
Zhang, L., Tang, B., Wu, J., Li, R., & Wang, P. (2015) · Advanced Materials · doi:10.1002/adma.201502362 · Cited by 1,008
Tailoring Graphene Oxide‐Based Aerogels for Efficient Solar Steam Generation under One Sun
Hu, X., Xu, W., Zhou, L., Tan, Y., Wang, Y., Zhu, S., & Zhu, J. (2017) · Advanced Materials · doi:10.1002/adma.201604031 · Cited by 978
A comparative technoeconomic analysis of renewable hydrogen production using solar energy
Shaner, M. R., Atwater, H. A., Lewis, N. S., & McFarland, E. W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02573g · Cited by 960
Plasmonic Wood for High‐Efficiency Solar Steam Generation
Zhu, M., Li, Y., Chen, F., Zhu, X., Dai, J., Li, Y., Yang, Z., Yan, X., Song, J., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701028 · Cited by 937
Xu, W., Hu, X., Zhuang, S., Wang, Y., Li, X., Zhou, L., Zhu, S., & Zhu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702884 · Cited by 905
Zhu, L., Gao, M., Peh, C. K. N., & Ho, G. W. (2018) · Materials Horizons · doi:10.1039/c7mh01064h · Cited by 733
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Zhu, L., Gao, M., Peh, C. K. N., Wang, X., & Ho, G. W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702149 · Cited by 655
Wood–Graphene Oxide Composite for Highly Efficient Solar Steam Generation and Desalination
Liu, K.-K., Jiang, Q., Tadepalli, S., Raliya, R., Biswas, P., Naik, R. R., & Singamaneni, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01307 · Cited by 619
Solar power technologies for sustainable electricity generation – A review
Khan, J., & Arsalan, M. H. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.135 · Cited by 580
Robust and Low-Cost Flame-Treated Wood for High-Performance Solar Steam Generation
Xue, G., Liu, K., Chen, Q., Yang, P., Li, J., Ding, T., Duan, J., Qi, B., & Zhou, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01992 · Cited by 567
Li, T., Liu, H., Zhao, X., Chen, G., Dai, J., Pastel, G., Jia, C., Chen, C., Hitz, E., Siddhartha, D., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707134 · Cited by 545
Wang, Y., Zhang, L., & Wang, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01274 · Cited by 529
Wu, Z., Chen, L., Liu, J., Parvez, K., Liang, H., Shu, J., Sachdev, H., Graf, R., Feng, X., & Müllen, K. (2014) · Advanced Materials · doi:10.1002/adma.201304147 · Cited by 460
Water desalination system using solar heat: A review
M, C., & Yadav, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.08.058 · Cited by 396
Carbon‐Based Sunlight Absorbers in Solar‐Driven Steam Generation Devices
Dao, V., & Choi, H. (2018) · Global Challenges · doi:10.1002/gch2.201700094 · Cited by 339
Extremely Black Vertically Aligned Carbon Nanotube Arrays for Solar Steam Generation
Yin, Z., Wang, H., Jian, M., Li, Y., Xia, K., Zhang, M., Wang, C., Wang, Q., Ma, M., Zheng, Q.-S., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08619 · Cited by 328
Nature-Inspired, 3D Origami Solar Steam Generator toward Near Full Utilization of Solar Energy
Hong, S., Shi, Y., Li, R., Zhang, C., Jin, Y., & Wang, P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07150 · Cited by 295
Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells
Ye, L., Jiao, X., Zhou, M., Zhang, S., Yao, H., Zhao, W., Xia, A., Ade, H., & Hou, J. (2015) · Advanced Materials · doi:10.1002/adma.201503218 · Cited by 294
A durable monolithic polymer foam for efficient solar steam generation
Chen, Q., Pei, Z., Xu, Y., Li, Z., Yang, Y., Wei, Y., & Ji, Y. (2018) · Chemical Science · doi:10.1039/c7sc02967e · Cited by 284
Fei, J., & Li, J. (2015) · Advanced Materials · doi:10.1002/adma.201404007 · Cited by 250
Accessible Graphene Aerogel for Efficiently Harvesting Solar Energy
Fu, Y., Wang, G., Mei, T., Li, J., Wang, J., & Wang, X. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03207 · Cited by 239
High Surface Area Conjugated Microporous Polymers: The Importance of Reaction Solvent Choice
Dawson, R., Laybourn, A., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2010) · Macromolecules · doi:10.1021/ma101541h · Cited by 219
Kolanthai, E., Sindu, P. A., Khajuria, D. K., Veerla, S. C., Kuppuswamy, D., Catalani, L. H., & Mahapatra, D. R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00699 · Cited by 208
Kim, K., Yu, S., An, C., Kim, S., & Jang, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19584 · Cited by 153
Yuan, K., Hu, T., Xu, Y., Graf, R., Shi, L., Forster, M., Pichler, T., Riedl, T., Chen, Y., & Scherf, U. (2016) · Materials Chemistry Frontiers · doi:10.1039/c6qm00012f · Cited by 78
Cited by
Photothermal Nanomaterials: A Powerful Light-to-Heat Converter
Cui, X., Ruan, Q., Zhuo, X., Xia, X., Hu, J., Fu, R., Li, Y., Wang, J., & Xu, H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00159 · Cited by 1,944
Hydrogels and Hydrogel-Derived Materials for Energy and Water Sustainability
Guo, Y., Bae, J., Fang, Z., Li, P., Zhao, F., & Yu, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00345 · Cited by 1,395
Interfacial Solar Evaporation: From Fundamental Research to Applications
Wu, X., Lu, Y., Ren, X., Wu, P., Chu, D., Yang, X., & Xu, H. (2024) · Advanced Materials · doi:10.1002/adma.202313090 · Cited by 571
Li, Z., Xu, X., Sheng, X., Lin, P., Tang, J., Pan, L., Kaneti, Y. V., Yang, T., & Yamauchi, Y. (2021) · ACS Nano · doi:10.1021/acsnano.1c01590 · Cited by 463
Li, Y., Shi, Y., Wang, H., Liu, T., Zheng, X., Gao, S., & Lu, J. (2023) · Carbon Energy · doi:10.1002/cey2.331 · Cited by 460
Metadata
- Authors
- Mu, P., Zhang, Z., Bai, W., He, J., Sun, H., Zhu, Z., Liang, W., & Li, A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-11-13
- Volume
- 9
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2901584168
- Cited by
- 487
- References
- 35
- FWCI
- 12.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.