The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Record Open‐Circuit Voltage Wide‐Bandgap Perovskite Solar Cells Utilizing 2D/3D Perovskite Heterostructure
Abstract
In this work, the authors realize stable and highly efficient wide‐bandgap perovskite solar cells that promise high power conversion efficiencies (PCE) and are likely to play a key role in next generation multi‐junction photovoltaics (PV). This work reports on wide‐bandgap (≈1.72 eV) perovskite solar cells exhibiting stable PCEs of up to 19.4% and a remarkably high open‐circuit voltage (VOC) of 1.31 V. The VOC‐to‐bandgap ratio is the highest reported for wide‐bandgap organic−inorganic hybrid perovskite solar cells and the VOC also exceeds 90% of the theoretical maximum, defined by the Shockley–Queisser limit. This advance is based on creating a hybrid 2D/3D perovskite heterostructure. By spin coating n‐butylammonium bromide on the double‐cation perovskite absorber layer, a thin 2D Ruddlesden–Popper perovskite layer of intermediate phases is formed, which mitigates nonradiative recombination in the perovskite absorber layer. As a result, VOC is enhanced by 80 mV.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F. (1995) · Medical Entomology and Zoology · Cited by 23,662
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Self-citationPerovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
The light and shade of perovskite solar cells
Grätzel, M. (2014) · Nature Materials · doi:10.1038/nmat4065 · Cited by 2,258
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Ruddlesden–Popper Hybrid Lead Iodide Perovskite 2D Homologous Semiconductors
Stoumpos, C. C., Cao, D. H., Clark, D. J., Young, J., Rondinelli, J. M., Jang, J. I., Hupp, J. T., & Kanatzidis, M. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00847 · Cited by 2,130
Maximizing and stabilizing luminescence from halide perovskites with potassium passivation
Abdi-Jalebi, M., Andaji-Garmaroudi, Z., Cacovich, S., Stavrakas, C., Philippe, B., Richter, J. M., Alsari, M., Booker, E. P., Hutter, E. M., Pearson, A. J., et al. (2018) · Nature · doi:10.1038/nature25989 · Cited by 1,734
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Hao, F., Stoumpos, C. C., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5033259 · Cited by 1,501
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
Extremely efficient internal exciton dissociation through edge states in layered 2D perovskites
Blancon, J.-C., Tsai, H., Nie, W., Stoumpos, C. C., Pedesseau, L., Katan, C., Kepenekian, M., Soe, C. M. M., Appavoo, K., Sfeir, M. Y., et al. (2017) · Science · doi:10.1126/science.aal4211 · Cited by 1,102
Detailed balance limit of the efficiency of tandem solar cells
Vos, A. D. (1980) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/13/5/018 · Cited by 1,003
2D Ruddlesden–Popper Perovskites for Optoelectronics
Chen, Y., Sun, Y., Peng, J., Tang, J., Zheng, K., & Liang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201703487 · Cited by 892
Tress, W., Yavari, M., Domanski, K., Yadav, P., Niesen, B., Correa Baena, J. P., Hagfeldt, A., & Graetzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02415k · Cited by 843
In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Chen, P., Bai, Y., Wang, S., Lyu, M., Yun, J., & Wang, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706923 · Cited by 776
Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
Weidman, M. C., Seitz, M., Stranks, S. D., & Tisdale, W. A. (2016) · ACS Nano · doi:10.1021/acsnano.6b03496 · Cited by 629
Liu, J., Leng, J., Wu, K., Zhang, J., & Jin, S. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12581 · Cited by 566
Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Efficient Monolithic Perovskite/Silicon Tandem Solar Cell with Cell Area >1 cm2
Werner, J., Weng, C.-H., Walter, A., Fesquet, L., Seif, J. P., De Wolf, S., Niesen, B., & Ballif, C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02686 · Cited by 539
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Duong, T., Wu, Y., Shen, H., Peng, J., Fu, X., Jacobs, D., Wang, E., Kho, T. C., Fong, K. C., Stocks, M., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700228 · Cited by 519
Braly, I. L., deQuilettes, D. W., Pazos-Outón, L. M., Burke, S., Ziffer, M. E., Ginger, D. S., & Hillhouse, H. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0154-z · Cited by 517
Bush, K. A., Frohna, K., Prasanna, R., Beal, R. E., Leijtens, T., Swifter, S. A., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01255 · Cited by 480
Cost Analysis of Perovskite Tandem Photovoltaics
Li, Z., Zhao, Y., Wang, X., Sun, Y., Zhao, Z., Li, Y., Zhou, H., & Chen, Q. (2018) · Joule · doi:10.1016/j.joule.2018.05.001 · Cited by 429
Bai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Lin, H., Yang, Y., & Yang, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701038 · Cited by 369
Rajagopal, A., Yang, Z., Jo, S. B., Braly, I. L., Liang, P., Hillhouse, H. W., & Jen, A. K. ‐. (2017) · Advanced Materials · doi:10.1002/adma.201702140 · Cited by 368
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Passarelli, J. V., Fairfield, D. J., Sather, N. A., Hendricks, M. P., Sai, H., Stern, C. L., & Stupp, S. I. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03659 · Cited by 365
Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells
Liu, Z., Krückemeier, L., Krogmeier, B., Klingebiel, B., Márquez, J. A., Levcenko, S., Öz, S., Mathur, S., Rau, U., Unold, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01906 · Cited by 365
Correa-Baena, J.-P., Tress, W., Domanski, K., Anaraki, E. H., Turren-Cruz, S.-H., Roose, B., Boix, P. P., Grätzel, M., Saliba, M., Abate, A., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00421d · Cited by 338
Cho, Y., Soufiani, A. M., Yun, J. S., Kim, J., Lee, D. S., Seidel, J., Deng, X., Green, M. A., Huang, S., & Ho‐Baillie, A. W. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703392 · Cited by 334
Selecting tandem partners for silicon solar cells
Yu, Z. J., Leilaeioun, M. A., & Holman, Z. C. (2016) · Nature Energy · doi:10.1038/nenergy.2016.137 · Cited by 325
High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration
Fu, F., Feurer, T., Weiss, T. P., Pisoni, S., Avancini, E., Andres, C., Buecheler, S., & Tiwari, A. N. (2016) · Nature Energy · doi:10.1038/nenergy.2016.190 · Cited by 314
Kirchartz, T., & Rau, U. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703385 · Cited by 305
Ke, W., Mao, L., Stoumpos, C. C., Hoffman, J., Spanopoulos, I., Mohite, A. D., & Kanatzidis, M. G. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803384 · Cited by 269
Shen, H., Duong, T., Peng, J., Jacobs, D., Wu, N., Gong, J., Wu, Y., Karuturi, S. K., Fu, X., Weber, K., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02627g · Cited by 257
High-Bandgap Perovskite Materials for Multijunction Solar Cells
Yang, T. C.-J., Fiala, P., Jeangros, Q., & Ballif, C. (2018) · Joule · doi:10.1016/j.joule.2018.05.008 · Cited by 251
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
Zhou, Y., Wang, F., Cao, Y., Wang, J., Fang, H., Loi, M. A., Zhao, N., & Wong, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701048 · Cited by 234
Enhancing moisture tolerance in efficient hybrid 3D/2D perovskite photovoltaics
Koh, T. M., Shanmugam, V., Guo, X., Lim, S. S., Filonik, O., Herzig, E. M., Müller-Buschbaum, P., Swamy, V., Chien, S. T., Mhaisalkar, S. G., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta09657g · Cited by 226
The Institute of Chemistry of Great Britain and Ireland. Journal and Proceedings. Part II: 1935
(1935) · Journal and Proceedings of the Institute of Chemistry of Great Britain and Ireland · doi:10.1039/jg9355900101 · Cited by 195
Zhou, Y., Jia, Y., Fang, H., Loi, M. A., Xie, F., Gong, L., Qin, M., Lu, X., Wong, C., & Zhao, N. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803130 · Cited by 195
Minimizing Voltage Loss in Wide-Bandgap Perovskites for Tandem Solar Cells
Jaysankar, M., Raul, B. A. L., Bastos, J., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02179 · Cited by 180
Assessing Possibilities and Limits for Solar Cells
Nayak, P. K., Bisquert, J., & Cahen, D. (2011) · Advanced Materials · doi:10.1002/adma.201100877 · Cited by 131
Christodoulou, S., Stasio, F. D., Pradhan, S., Stavrinadis, A., & Konstantatos, G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01264 · Cited by 69
Scalable perovskite/CIGS thin-film solar module with power conversion efficiency of 17.8%
Paetzold, U. W., Jaysankar, M., Gehlhaar, R., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01651d · Cited by 57
Self-citationNaphade, R. A., Zhao, B., Richter, J. M., Booker, E. P., Krishnamurthy, S., Friend, R. H., Sadhanala, A., & Ogale, S. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700562 · Cited by 38
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Xiao, K., Lin, R., Han, Q., Hou, Y., Qin, Z., Nguyen, H. T., Wen, J., Wei, M., Yeddu, V., Saidaminov, M. I., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-00705-5 · Cited by 768
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Metadata
- Authors
- Gharibzadeh, S., Abdollahi Nejand, B., Jakoby, M., Abzieher, T., Hauschild, D., Moghadamzadeh, S., Schwenzer, J. A., Brenner, P., Schmager, R., Haghighirad, A. A., Weinhardt, L., Lemmer, U., Richards, B. S., Howard, I. A., & Paetzold, U. W.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-04-24
- Volume
- 9
- Issue
- 21
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2941419438
- Cited by
- 435
- References
- 57
- FWCI
- 25.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.