The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells
Open accessAbstract
Lead halide perovskite solar cells now show excellent efficiencies and encouraging levels of stability. Further improvements in performance require better control of the trap states which are considered to be associated with vacancies and defects at crystallite surfaces. Herein, a reflection on the ways in which these traps can be mitigated is presented by improving the quality of the perovskite layer and interfaces in fully assembled device configurations. In this review, the most recent design strategies reported in the literature, which have been explored to tune grain orientation, to passivate defects, and to improve charge‐carrier lifetimes, are presented. Specifically, the advances made with single‐cation, mixed‐cation and/or mixed‐halide, and 3D/2D bilayer‐based light absorbers are discussed. The interfacial, compositional, and band alignment engineering along with their consequent effects on the open‐circuit voltage, power conversion efficiency, and stability are a particular focus.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationLong-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Self-citationSolvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Self-citationIncorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citationHigh-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Self-citationFormamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Self-citationEnhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationPlanar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Yang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
Self-citationYi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Self-citationSherkar, T. S., Momblona, C., Gil-Escrig, L., Ávila, J., Sessolo, M., Bolink, H. J., & Koster, L. J. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00236 · Cited by 1,280
Highly efficient planar perovskite solar cells through band alignment engineering
Correa Baena, J. P., Steier, L., Tress, W., Saliba, M., Neutzner, S., Matsui, T., Giordano, F., Jacobsson, T. J., Srimath Kandada, A. R., Zakeeruddin, S. M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02608c · Cited by 1,265
Self-citationThermodynamically stabilized β-CsPbI 3 –based perovskite solar cells with efficiencies >18%
Wang, Y., Dar, M. I., Ono, L. K., Zhang, T., Kan, M., Li, Y., Zhang, L., Wang, X., Yang, Y., Gao, X., et al. (2019) · Science · doi:10.1126/science.aav8680 · Cited by 1,249
Self-citationLi, N., Tao, S., Chen, Y., Niu, X., Onwudinanti, C. K., Hu, C., Qiu, Z., Xu, Z., Zheng, G., Wang, L., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0382-6 · Cited by 1,167
A Eu 3+ -Eu 2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Wang, L., Zhou, H., Hu, J., Huang, B., Sun, M., Dong, B., Zheng, G., Huang, Y., Chen, Y., Li, L., et al. (2019) · Science · doi:10.1126/science.aau5701 · Cited by 1,093
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Qin, P., Tanaka, S., Ito, S., Tetreault, N., Manabe, K., Nishino, H., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Communications · doi:10.1038/ncomms4834 · Cited by 894
Self-citationImproving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Self-citationMoisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells
Chen, P., Bai, Y., Wang, S., Lyu, M., Yun, J., & Wang, L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706923 · Cited by 776
2D perovskite stabilized phase-pure formamidinium perovskite solar cells
Lee, J.-W., Dai, Z., Han, T.-H., Choi, C., Chang, S.-Y., Lee, S.-J., De Marco, N., Zhao, H., Sun, P., Huang, Y., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05454-4 · Cited by 746
Yang, S., Dai, J., Yu, Z., Shao, Y., Zhou, Y., Xiao, X., Zeng, X. C., & Huang, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13091 · Cited by 744
Liu, Y., Akin, S., Pan, L., Uchida, R., Arora, N., Milić, J. V., Hinderhofer, A., Schreiber, F., Uhl, A. R., Zakeeruddin, S. M., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw2543 · Cited by 710
Self-citationAn interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Stabilizing heterostructures of soft perovskite semiconductors
Wang, Y., Wu, T., Barbaud, J., Kong, W., Cui, D., Chen, H., Yang, X., & Han, L. (2019) · Science · doi:10.1126/science.aax8018 · Cited by 585
High efficiency stable inverted perovskite solar cells without current hysteresis
Wu, C.-G., Chiang, C.-H., Tseng, Z.-L., Nazeeruddin, M. K., Hagfeldt, A., & Grätzel, M. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00645g · Cited by 581
Self-citationEnhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures
Lin, Y., Bai, Y., Fang, Y., Chen, Z., Yang, S., Zheng, X., Tang, S., Liu, Y., Zhao, J., & Huang, J. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02679 · Cited by 554
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Functionalization of perovskite thin films with moisture-tolerant molecules
Yang, S., Wang, Y., Liu, P., Cheng, Y.-B., Zhao, H. J., & Yang, H. G. (2016) · Nature Energy · doi:10.1038/nenergy.2015.16 · Cited by 521
Peng, J., Khan, J. I., Liu, W., Ugur, E., Duong, T., Wu, Y., Shen, H., Wang, K., Dang, H., Aydin, E., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801208 · Cited by 518
Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells
Xiang, W., Wang, Z., Kubicki, D. J., Tress, W., Luo, J., Prochowicz, D., Akin, S., Emsley, L., Zhou, J., Dietler, G., et al. (2019) · Joule · doi:10.1016/j.joule.2018.10.008 · Cited by 460
Self-citationThermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Understanding the Doping Effect on NiO: Toward High‐Performance Inverted Perovskite Solar Cells
Chen, W., Wu, Y., Fan, J., Djurišić, A. B., Liu, F., Tam, H. W., Ng, A., Surya, C., Chan, W. K., Wang, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703519 · Cited by 435
Gharibzadeh, S., Abdollahi Nejand, B., Jakoby, M., Abzieher, T., Hauschild, D., Moghadamzadeh, S., Schwenzer, J. A., Brenner, P., Schmager, R., Haghighirad, A. A., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803699 · Cited by 435
Roldán-Carmona, C., Gratia, P., Zimmermann, I., Grancini, G., Gao, P., Graetzel, M., & Nazeeruddin, M. K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02555a · Cited by 431
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Zhao, Y., Tan, H., Yuan, H., Yang, Z., Fan, J. Z., Kim, J., Voznyy, O., Gong, X., Quan, L. N., Tan, C. S., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04029-7 · Cited by 414
Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites
Dar, M. I., Jacopin, G., Meloni, S., Mattoni, A., Arora, N., Boziki, A., Zakeeruddin, S. M., Rothlisberger, U., & Grätzel, M. (2016) · Science Advances · doi:10.1126/sciadv.1601156 · Cited by 412
Self-citationChen, W., Zhou, Y., Wang, L., Wu, Y., Tu, B., Yu, B., Liu, F., Tam, H., Wang, G., Djurišić, A. B., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800515 · Cited by 411
Interface Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency over 14%
Yan, L., Xue, Q., Liu, M., Zhu, Z., Tian, J., Li, Z., Chen, Z., Chen, Z., Yan, H., Yip, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201802509 · Cited by 404
Zhang, F., Shi, W., Luo, J., Pellet, N., Yi, C., Li, X., Zhao, X., Dennis, T. J. S., Li, X., Wang, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606806 · Cited by 390
Self-citationBai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Lin, H., Yang, Y., & Yang, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701038 · Cited by 369
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells
Liu, Z., Krückemeier, L., Krogmeier, B., Klingebiel, B., Márquez, J. A., Levcenko, S., Öz, S., Mathur, S., Rau, U., Unold, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01906 · Cited by 365
Chen, Y., Sun, Y., Peng, J., Zhang, W., Su, X., Zheng, K., Pullerits, T., & Liang, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700162 · Cited by 358
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Hybrid Perovskite/Perovskite Heterojunction Solar Cells
Hu, Y., Schlipf, J., Wussler, M., Petrus, M. L., Jaegermann, W., Bein, T., Müller-Buschbaum, P., & Docampo, P. (2016) · ACS Nano · doi:10.1021/acsnano.6b01535 · Cited by 345
From Ultrafast to Ultraslow: Charge-Carrier Dynamics of Perovskite Solar Cells
Shi, J., Li, Y., Li, Y., Li, D., Luo, Y., Wu, H., & Meng, Q. (2018) · Joule · doi:10.1016/j.joule.2018.04.010 · Cited by 341
Correa-Baena, J.-P., Tress, W., Domanski, K., Anaraki, E. H., Turren-Cruz, S.-H., Roose, B., Boix, P. P., Grätzel, M., Saliba, M., Abate, A., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00421d · Cited by 338
Self-citationLiu, Z., Chang, J., Lin, Z., Zhou, L., Yang, Z., Chen, D., Zhang, C., Liu, S. (., & Hao, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703432 · Cited by 324
Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites
Tan, H., Che, F., Wei, M., Zhao, Y., Saidaminov, M. I., Todorović, P., Broberg, D., Walters, G., Tan, F., Zhuang, T., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05531-8 · Cited by 315
Stabilized Wide Bandgap MAPbBrxI3–x Perovskite by Enhanced Grain Size and Improved Crystallinity
Hu, M., Bi, C., Yuan, Y., Bai, Y., & Huang, J. (2016) · Advanced Science · doi:10.1002/advs.201500301 · Cited by 288
Novel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Self-citationKlug, M. T., Osherov, A., Haghighirad, A. A., Stranks, S. D., Brown, P. R., Bai, S., Wang, J. T.-W., Dang, X., Bulović, V., Snaith, H. J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03201j · Cited by 274
Highly Efficient and Stable Solar Cells Based on Crystalline Oriented 2D/3D Hybrid Perovskite
Zhou, T., Lai, H., Liu, T., Lu, D., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901242 · Cited by 272
Nanostructuring Mixed‐Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics
Koh, T. M., Shanmugam, V., Schlipf, J., Oesinghaus, L., Müller‐Buschbaum, P., Ramakrishnan, N., Swamy, V., Mathews, N., Boix, P. P., & Mhaisalkar, S. G. (2016) · Advanced Materials · doi:10.1002/adma.201506141 · Cited by 271
Reduced Interface‐Mediated Recombination for High Open‐Circuit Voltages in CH3NH3PbI3 Solar Cells
Wolff, C. M., Zu, F., Paulke, A., Toro, L. P., Koch, N., & Neher, D. (2017) · Advanced Materials · doi:10.1002/adma.201700159 · Cited by 253
Yu, Y., Wang, C., Grice, C. R., Shrestha, N., Zhao, D., Liao, W., Guan, L., Awni, R. A., Meng, W., Cimaroli, A. J., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00278 · Cited by 245
The merit of perovskite's dimensionality; can this replace the 3D halide perovskite?
Etgar, L. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03397d · Cited by 244
Partial cation substitution reduces iodide ion transport in lead iodide perovskite solar cells
Ferdani, D. W., Pering, S. R., Ghosh, D., Kubiak, P., Walker, A. B., Lewis, S. E., Johnson, A. L., Baker, P. J., Islam, M. S., & Cameron, P. J. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00476a · Cited by 243
Zhou, Y., Wang, F., Cao, Y., Wang, J., Fang, H., Loi, M. A., Zhao, N., & Wong, C. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701048 · Cited by 234
Sequentially Fluorinated PTAA Polymers for Enhancing VOC of High‐Performance Perovskite Solar Cells
Kim, Y., Jung, E. H., Kim, G., Kim, D., Kim, B. J., & Seo, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801668 · Cited by 231
Abdi‐Jalebi, M., Dar, M. I., Sadhanala, A., Senanayak, S. P., Franckevičius, M., Arora, N., Hu, Y., Nazeeruddin, M. K., Zakeeruddin, S. M., Grätzel, M., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502472 · Cited by 228
Self-citationChen, C., Song, Z., Xiao, C., Zhao, D., Shrestha, N., Li, C., Yang, G., Yao, F., Zheng, X., Ellingson, R. J., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.069 · Cited by 196
The Institute of Chemistry of Great Britain and Ireland. Journal and Proceedings. Part II: 1935
(1935) · Journal and Proceedings of the Institute of Chemistry of Great Britain and Ireland · doi:10.1039/jg9355900101 · Cited by 195
Dar, M. I., Arora, N., Gao, P., Ahmad, S., Grätzel, M., & Nazeeruddin, M. K. (2014) · Nano Letters · doi:10.1021/nl503279x · Cited by 193
Self-citationHalvani Anaraki, E., Kermanpur, A., Mayer, M. T., Steier, L., Ahmed, T., Turren-Cruz, S.-H., Seo, J., Luo, J., Zakeeruddin, S. M., Tress, W. R., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00055 · Cited by 191
Self-citationHan, Q., Bai, Y., Liu, J., Du, K.-Z., Li, T., Ji, D., Zhou, Y., Cao, C., Shin, D., Ding, J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02272g · Cited by 190
Chen, L., Tan, Y.-Y., Chen, Z.-X., Wang, T., Hu, S., Nan, Z.-A., Xie, L.-Q., Hui, Y., Huang, J.-X., Zhan, C., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11610 · Cited by 187
Yue, Y., Salim, N., Wu, Y., Yang, X., Islam, A., Chen, W., Liu, J., Bi, E., Xie, F., Cai, M., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602822 · Cited by 186
Pham, H. D., Do, T. T., Kim, J., Charbonneau, C., Manzhos, S., Feron, K., Tsoi, W. C., Durrant, J. R., Jain, S. M., & Sonar, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703007 · Cited by 186
Targeted Therapy for Interfacial Engineering Toward Stable and Efficient Perovskite Solar Cells
Wang, S., Chen, H., Zhang, J., Xu, G., Chen, W., Xue, R., Zhang, M., Li, Y., & Li, Y. (2019) · Advanced Materials · doi:10.1002/adma.201903691 · Cited by 175
Hashmi, S. G., Martineau, D., Li, X., Ozkan, M., Tiihonen, A., Dar, M. I., Sarikka, T., Zakeeruddin, S. M., Paltakari, J., Lund, P. D., et al. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201600183 · Cited by 172
Self-citationGao, L., Spanopoulos, I., Ke, W., Huang, S., Hadar, I., Chen, L., Li, X., Yang, G., & Kanatzidis, M. G. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00930 · Cited by 172
Zhou, W., Li, D., Xiao, Z., Wen, Z., Zhang, M., Hu, W., Wu, X., Wang, M., Zhang, W., Lu, Y., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901026 · Cited by 171
Highly Efficient Perovskite Solar Cells with Gradient Bilayer Electron Transport Materials
Gong, X., Sun, Q., Liu, S., Liao, P., Shen, Y. F., Grätzel, C. K., Zakeeruddin, S. M., Grätzel, M., & Wang, M. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01440 · Cited by 170
Self-citationYang, Y., Peng, H., Liu, C., Arain, Z., Ding, Y., Ma, S., Liu, X., Hayat, T., Alsaedi, A., & Dai, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11925b · Cited by 164
Tavakoli, M. M., Tress, W., Milić, J. V., Kubicki, D., Emsley, L., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02404a · Cited by 161
Self-citationQiao, H. W., Yang, S., Wang, Y., Chen, X., Wen, T. Y., Tang, L. J., Cheng, Q., Hou, Y., Zhao, H., & Yang, H. G. (2018) · Advanced Materials · doi:10.1002/adma.201804217 · Cited by 129
Kogo, A., Sanehira, Y., Numata, Y., Ikegami, M., & Miyasaka, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16662 · Cited by 119
Fully Vacuum-Processed Wide Band Gap Mixed-Halide Perovskite Solar Cells
Longo, G., Momblona, C., La‐Placa, M., Gil‐Escrig, L., Sessolo, M., & Bolink, H. J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01217 · Cited by 113
Dual function interfacial layer for highly efficient and stable lead halide perovskite solar cells
Song, D., Wei, D., Cui, P., Li, M., Duan, Z., Wang, T., Ji, J., Li, Y., Mbengue, J. M., Li, Y., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00577b · Cited by 108
Dual effect of humidity on cesium lead bromide: enhancement and degradation of perovskite films
Girolamo, D. D., Dar, M. I., Dini, D., Gontrani, L., Caminiti, R., Mattoni, A., Grätzel, M., & Meloni, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00715f · Cited by 96
Self-citationLayer-edge device of two-dimensional hybrid perovskites
Cheng, B., Li, T., Wei, P., Yin, J. L., Ho, K., Retamal, J. R. D., Mohammed, O. F., & He, J. (2018) · Nature Communications · doi:10.1038/s41467-018-07656-2 · Cited by 82
Reduced Graphene Oxide as a Stabilizing Agent in Perovskite Solar Cells
Milić, J. V., Arora, N., Dar, M. I., Zakeeruddin, S. M., & Grätzel, M. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800416 · Cited by 64
Self-citationLuo, W., Wu, C., Wang, D., Zhang, Y., Zhang, Z., Qi, X., Zhu, N., Guo, X., Qu, B., Xiao, L., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22040 · Cited by 63
Hou, Y., Zhou, Z. R., Wen, T. Y., Qiao, H. W., Lin, Z. Q., Ge, B., & Yang, H. G. (2018) · Nanoscale Horizons · doi:10.1039/c8nh00163d · Cited by 59
High efficiency MAPbI 3−x Cl x perovskite solar cell via interfacial passivation
Yuan, S., Wang, J., Yang, K., Wang, P., Zhang, X., Zhan, Y., & Zheng, L. (2018) · Nanoscale · doi:10.1039/c8nr05504a · Cited by 46
Greco, A., Hinderhofer, A., Dar, M. I., Arora, N., Hagenlocher, J., Chumakov, A. P., Grätzel, M., & Schreiber, F. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.8b02916 · Cited by 39
Self-citationDar, M. I., Franckevičius, M., Arora, N., Redeckas, K., Vengris, M., Gulbinas, V., Zakeeruddin, S. M., & Grätzel, M. (2017) · Chemical Physics Letters · doi:10.1016/j.cplett.2017.04.046 · Cited by 38
Self-citationAsymmetric Cathodoluminescence Emission in CH3NH3PbI3–xBrx Perovskite Single Crystals
Dar, M. I., Jacopin, G., Hezam, M., Arora, N., Zakeeruddin, S. M., Deveaud, B., Nazeeruddin, M. K., & Grätzel, M. (2016) · ACS Photonics · doi:10.1021/acsphotonics.6b00290 · Cited by 35
Self-citation
Cited by
Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Rationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Sensitive and Stable 2D Perovskite Single‐Crystal X‐ray Detectors Enabled by a Supramolecular Anchor
Li, H., Song, J., Pan, W., Xu, D., Zhu, W., Wei, H., & Yang, B. (2020) · Advanced Materials · doi:10.1002/adma.202003790 · Cited by 304
Metadata
- Authors
- Akin, S., Arora, N., Zakeeruddin, S. M., Grätzel, M., Friend, R. H., & Dar, M. I.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-11-19
- Volume
- 10
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2989749893
- Cited by
- 352
- References
- 110
- FWCI
- 15.86
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.