The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
High Electron Affinity Enables Fast Hole Extraction for Efficient Flexible Inverted Perovskite Solar Cells
Abstract
Inverted perovskite solar cells (PSCs) with low‐temperature processed hole transporting materials (HTMs) suffer from poor performance due to the inferior hole‐extraction capability at the HTM/perovskite interfaces. Here, molecules with controlled electron affinity enable a HTM with conductivity improved by more than ten times and a decreased energy gap between the Fermi level and the valence band from 0.60 to 0.24 eV, leading to the enhancement of hole‐extraction capacity by five times. As a result, the 3,6‐difluoro‐2,5,7,7,8,8‐hexacyanoquinodimethane molecules are used for the first time enhancing open‐circuit voltage (Voc) and fill factor (FF) of the PSCs, which enable rigid‐and flexible‐based inverted perovskite devices achieving highest power conversion efficiencies of 22.13% and 20.01%, respectively. This new method significantly enhances the Voc and FF of the PSCs, which can be widely combined with HTMs based on not only NiOx but also PTAA, PEDOTT:PSS, and CuSCN, providing a new way of realizing efficient inverted PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Self-citationEfficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citationJiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Self-citationEnhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
Self-citationPerovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., et al. (2014) · ACS Nano · doi:10.1021/nn406020d · Cited by 1,448
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Stolterfoht, M., Caprioglio, P., Wolff, C. M., Márquez, J. A., Nordmann, J., Zhang, S., Rothhardt, D., Hörmann, U., Amir, Y., Redinger, A., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02020a · Cited by 966
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Salzmann, I., Heimel, G., Oehzelt, M., Winkler, S., & Koch, N. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00438 · Cited by 743
A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules
Chen, H., Ye, F., Tang, W., He, J., Yin, M., Wang, Y., Xie, F., Bi, E., Yang, X., Grätzel, M., et al. (2017) · Nature · doi:10.1038/nature23877 · Cited by 716
Self-citationWu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Self-citationDoping of organic semiconductors
Lüssem, B., Riede, M., & Leo, K. (2013) · physica status solidi (a) · doi:10.1002/pssa.201228310 · Cited by 594
Controlling Molecular Doping in Organic Semiconductors
Jacobs, I. E., & Moulé, A. J. (2017) · Advanced Materials · doi:10.1002/adma.201703063 · Cited by 572
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Leijtens, T., Eperon, G. E., Barker, A. J., Grancini, G., Zhang, W., Ball, J. M., Kandada, A. R. S., Snaith, H. J., & Petrozza, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01729k · Cited by 543
Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers
Kim, H., Lim, K.-G., & Lee, T.-W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02194d · Cited by 507
Record Efficiency Stable Flexible Perovskite Solar Cell Using Effective Additive Assistant Strategy
Feng, J., Zhu, X., Yang, Z., Zhang, X., Niu, J., Wang, Z., Zuo, S., Priya, S., Liu, S. (., & Yang, D. (2018) · Advanced Materials · doi:10.1002/adma.201801418 · Cited by 484
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Chen, W., Liu, F., Feng, X., Djurišić, A. B., Chan, W. K., & He, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700722 · Cited by 457
Self-citationChen, W., Zhou, Y., Wang, L., Wu, Y., Tu, B., Yu, B., Liu, F., Tam, H., Wang, G., Djurišić, A. B., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800515 · Cited by 411
Self-citationCharge-transfer crystallites as molecular electrical dopants
Méndez, H., Heimel, G., Winkler, S., Frisch, J., Opitz, A., Sauer, K., Wegner, B., Oehzelt, M., Röthel, C., Duhm, S., et al. (2015) · Nature Communications · doi:10.1038/ncomms9560 · Cited by 409
Wang, Q., Bi, C., & Huang, J. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.029 · Cited by 309
Feng, J., Yang, Z., Yang, D., Ren, X., Zhu, X., Jin, Z., Zi, W., Wei, Q., & Liu, S. (. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.010 · Cited by 260
Liu, X., Cheng, Y., Liu, C., Zhang, T., Zhang, N., Zhang, S., Chen, J., Xu, Q., Ouyang, J., & Gong, H. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00872a · Cited by 245
Lim, K., Ahn, S., Kim, Y., Qi, Y., & Lee, T. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03560k · Cited by 244
Stolterfoht, M., Caprioglio, P., Wolff, C. M., Marquez, J. A., Nordmann, J., Zhang, S., Rothhardt, D., Hörmann, U., Redinger, A., Kegelmann, L., et al. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1810.01333 · Cited by 240
Liu, D., Li, Y., Yuan, J., Hong, Q., Shi, G., Yuan, D., Wei, J., Huang, C., Tang, J., & Fung, M.-K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10212c · Cited by 237
Li, G., Jiang, Y., Deng, S., Tam, A. M. W., Xu, P., Wong, M., & Kwok, H. S. (2017) · Advanced Science · doi:10.1002/advs.201700463 · Cited by 227
Doping of Organic Semiconductors: Impact of Dopant Strength and Electronic Coupling
Méndez, H., Heimel, G., Opitz, A., Sauer, K., Barkowski, P., Oehzelt, M., Soeda, J., Okamoto, T., Takeya, J., Arlin, J., et al. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302396 · Cited by 223
Efficient Flexible Solar Cell based on Composition‐Tailored Hybrid Perovskite
Bi, C., Chen, B., Wei, H., DeLuca, S. J., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201605900 · Cited by 220
Controlled Doping of Large‐Area Trilayer MoS2 with Molecular Reductants and Oxidants
Tarasov, A., Zhang, S., Tsai, M., Campbell, P. M., Graham, S., Barlow, S., Marder, S. R., & Vogel, E. M. (2015) · Advanced Materials · doi:10.1002/adma.201404578 · Cited by 218
Overcoming the Interface Losses in Planar Heterojunction Perovskite‐Based Solar Cells
Hou, Y., Chen, W., Baran, D., Stubhan, T., Luechinger, N. A., Hartmeier, B., Richter, M., Min, J., Chen, S., Quiroz, C. O. R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504168 · Cited by 206
Self-citationNajafi, M., Giacomo, F. D., Zhang, D., Shanmugam, S., Senes, A., Verhees, W. J. H., Hadipour, A., Galagan, Y., Aernouts, T., Veenstra, S. C., et al. (2018) · Small · doi:10.1002/smll.201702775 · Cited by 134
Spectral Properties of Multiply Charged Semiconductor Quantum Dots
Yalcin, S. E., Labastide, J. A., Sowle, D. L., & Barnes, M. D. (2011) · Nano Letters · doi:10.1021/nl2026103 · Cited by 43
Cited by
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Li, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Self-citationFlexible self-charging power sources
Liu, R., Wang, Z. L., Fukuda, K., & Someya, T. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00441-0 · Cited by 526
Rapid advances enabling high-performance inverted perovskite solar cells
Jiang, Q., & Zhu, K. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00678-x · Cited by 410
A brief review of hole transporting materials commonly used in perovskite solar cells
Li, S., Cao, Y., Li, W., & Bo, Z. (2021) · Rare Metals · doi:10.1007/s12598-020-01691-z · Cited by 346
Metadata
- Authors
- Ru, P., Bi, E., Zhang, Y., Wang, Y., Kong, W., Sha, Y., Tang, W., Zhang, P., Wu, Y., Chen, W., Yang, X., Chen, H., & Han, L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-01-30
- Volume
- 10
- Issue
- 12
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3003718517
- Cited by
- 298
- References
- 41
- FWCI
- 17.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.