The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
High‐Performance Hole‐Extraction Layer of Sol–Gel‐Processed NiO Nanocrystals for Inverted Planar Perovskite Solar Cells
Abstract
Hybrid organic/inorganic perovskite solar cells have been rapidly evolving with spectacular successes in both nanostructured and thin‐film versions. Herein, we report the use of a simple sol–gel‐processed NiO nanocrystal (NC) layer as the hole‐transport layer in an inverted perovskite solar cell. The thin NiO NC film with a faceted and corrugated surface enabled the formation of a continuous and compact layer of well‐crystallized CH 3 NH 3 PbI 3 in a two‐step solution process. The hole‐extraction and ‐transport capabilities of this film interfaced with the CH 3 NH 3 PbI 3 film were higher than those of organic PEDOT:PSS layers. The cell with a NiO NC film with a thickness of 30–40 nm exhibited the best performance, as a thinner layer led to a higher leakage current, whereas a thicker layer resulted in a higher series resistance. With the NiO film, we observed a cell efficiency of 9.11 %, which is by far the highest reported for planar perovskite solar cells based on an inorganic hole‐extracting layer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., et al. (2014) · ACS Nano · doi:10.1021/nn406020d · Cited by 1,448
Park, N.-G. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400892a · Cited by 1,382
Irwin, M. D., Buchholz, D. B., Hains, A. W., Chang, R. P. H., & Marks, T. J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0711990105 · Cited by 1,350
Cited by
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Hole‐Transport Materials for Perovskite Solar Cells
Calió, L., Kazim, S., Grätzel, M., & Ahmad, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201601757 · Cited by 1,004
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Self-citationZhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Zhu, Z., Bai, Y., Liu, X., Chueh, C., Yang, S., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201600619 · Cited by 499
Self-citationRecent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Self-citationInterface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices
Han, T., Tan, S., Xue, J., Meng, L., Lee, J., & Yang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803515 · Cited by 481
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Que, M., Xing, Y., Que, W., Niu, C., & Shao, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b08135 · Cited by 476
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Advances in hole transport materials engineering for stable and efficient perovskite solar cells
Bakr, Z. H., Wali, Q., Fakharuddin, A., Schmidt-Mende, L., Brown, T. M., & Jose, R. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.025 · Cited by 455
Organohalide Lead Perovskites for Photovoltaic Applications
Yusoff, A. R. B. M., & Nazeeruddin, M. K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02893 · Cited by 439
Understanding the Doping Effect on NiO: Toward High‐Performance Inverted Perovskite Solar Cells
Chen, W., Wu, Y., Fan, J., Djurišić, A. B., Liu, F., Tam, H. W., Ng, A., Surya, C., Chan, W. K., Wang, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703519 · Cited by 435
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Reduced-Dimensional α-CsPbX3 Perovskites for Efficient and Stable Photovoltaics
Jiang, Y., Yuan, J., Ni, Y., Yang, J., Wang, Y., Jiu, T., Yuan, M., & Chen, J. (2018) · Joule · doi:10.1016/j.joule.2018.05.004 · Cited by 429
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Self-citationChen, W., Zhou, Y., Wang, L., Wu, Y., Tu, B., Yu, B., Liu, F., Tam, H., Wang, G., Djurišić, A. B., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800515 · Cited by 411
Interfaces in Perovskite Solar Cells
Shi, J., Xu, X., Li, D., & Meng, Q. (2015) · Small · doi:10.1002/smll.201403534 · Cited by 395
Seo, S., Park, I. J., Kim, M., Lee, S., Bae, C., Jung, H. S., Park, N.-G., Kim, J. Y., & Shin, H. (2016) · Nanoscale · doi:10.1039/c6nr01601d · Cited by 380
Bai, Y., Xiao, S., Hu, C., Zhang, T., Meng, X., Lin, H., Yang, Y., & Yang, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701038 · Cited by 369
Self-citationOrganic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Self-citationChen, W., Zhou, Y., Chen, G., Wu, Y., Tu, B., Liu, F., Huang, L., Ng, A. M. C., Djurišić, A. B., & He, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803872 · Cited by 348
Efficiency progress of inverted perovskite solar cells
Lin, X., Cui, D., Luo, X., Zhang, C., Han, Q., Wang, Y., & Han, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02017f · Cited by 346
Liu, Z., Chang, J., Lin, Z., Zhou, L., Yang, Z., Chen, D., Zhang, C., Liu, S. (., & Hao, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703432 · Cited by 324
Self-citationHan, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800882 · Cited by 293
Defect Study and Modelling of SnX3-Based Perovskite Solar Cells with SCAPS-1D
Samiul Islam, M., Sobayel, K., Al-Kahtani, A., Islam, M. A., Muhammad, G., Amin, N., Shahiduzzaman, M., & Akhtaruzzaman, M. (2021) · Nanomaterials · doi:10.3390/nano11051218 · Cited by 289
Impact of Interfacial Layers in Perovskite Solar Cells
Cho, A., & Park, N. (2017) · ChemSusChem · doi:10.1002/cssc.201701095 · Cited by 281
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Self-citationZhang, F., Yang, X., Cheng, M., Wang, W., & Sun, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2015.11.034 · Cited by 270
Less is More: Dopant‐Free Hole Transporting Materials for High‐Efficiency Perovskite Solar Cells
Zhou, W., Wen, Z., & Gao, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702512 · Cited by 270
Rao, H., Ye, S., Sun, W., Yan, W., Li, Y., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.044 · Cited by 261
Self-citationWang, Q., Chueh, C., Zhao, T., Cheng, J., Eslamian, M., Choy, W. C. H., & Jen, A. K. ‐. (2017) · ChemSusChem · doi:10.1002/cssc.201701262 · Cited by 253
Metadata
- Authors
- Zhu, Z., Bai, Y., Zhang, T., Liu, Z., Long, X., Wei, Z., Wang, Z., Zhang, L., Wang, J., Yan, F., & Yang, S.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2014-07-15
- Volume
- 53
- Issue
- 46
- Pages
- 12571-12575
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2102961544
- Cited by
- 457
- References
- 20
- FWCI
- 28.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.