The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Abstract
Two‐dimensional hybrid perovskites are used as absorbers in solar cells. Our first‐generation devices containing (PEA)2(MA)2[Pb 3 I 10] (1; PEA=C 6 H 5(CH 2)2 NH 3+, MA=CH 3 NH 3+) show an open‐circuit voltage of 1.18 V and a power conversion efficiency of 4.73 %. The layered structure allows for high‐quality films to be deposited through spin coating and high‐temperature annealing is not required for device fabrication. The 3D perovskite (MA)[PbI 3] (2) has recently been identified as a promising absorber for solar cells. However, its instability to moisture requires anhydrous processing and operating conditions. Films of 1 are more moisture resistant than films of 2 and devices containing 1 can be fabricated under ambient humidity levels. The larger bandgap of the 2D structure is also suitable as the higher bandgap absorber in a dual‐absorber tandem device. Compared to 2, the layered perovskite structure may offer greater tunability at the molecular level for material optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Conducting tin halides with a layered organic-based perovskite structure
Mitzi, D. B., Feild, C. A., Harrison, W. T. A., & Guloy, A. M. (1994) · Nature · doi:10.1038/369467a0 · Cited by 1,100
Detailed balance limit of the efficiency of tandem solar cells
Vos, A. D. (1980) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/13/5/018 · Cited by 1,003
Perovskite as Light Harvester: A Game Changer in Photovoltaics
Kazim, S., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308719 · Cited by 962
Templating and structural engineering in organic–inorganic perovskites
Mitzi, D. B. (2001) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b007070j · Cited by 945
Conducting Layered Organic-inorganic Halides Containing 〈110〉-Oriented Perovskite Sheets
Mitzi, D. B., Wang, S., Feild, C. A., Chess, C. A., & Guloy, A. M. (1995) · Science · doi:10.1126/science.267.5203.1473 · Cited by 808
Synthesis, Structure, and Properties of Organic‐Inorganic Perovskites and Related Materials
Mitzi, D. B. (1999) · Progress in Inorganic Chemistry · doi:10.1002/9780470166499.ch1 · Cited by 805
Self-Assembly of Broadband White-Light Emitters
Dohner, E. R., Hoke, E. T., & Karunadasa, H. I. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411045r · Cited by 784
Self-citationEra, M., Morimoto, S., Tsutsui, T., & Saito, S. (1994) · Applied Physics Letters · doi:10.1063/1.112265 · Cited by 625
Preparation and characterization of layered lead halide compounds
Calabrese, J., Jones, N. L., Harlow, R. L., Herron, N., Thorn, D. L., & Wang, Y. (1991) · Journal of the American Chemical Society · doi:10.1021/ja00006a076 · Cited by 596
Chondroudis, K., & Mitzi, D. B. (1999) · Chemistry of Materials · doi:10.1021/cm990561t · Cited by 490
Optical properties of PbI-based perovskite structures
Ishihara, T. (1994) · Journal of Luminescence · doi:10.1016/0022-2313(94)90145-7 · Cited by 426
Yamada, Y., Nakamura, T., Endo, M., Wakamiya, A., & Kanemitsu, Y. (2014) · Applied Physics Express · doi:10.7567/apex.7.032302 · Cited by 303
Optical spectroscopy of two-dimensional layered (C_6H_5C_2H_4-NH_3)_2-PbI_4 perovskite
Gauthron, K., Lauret, J., Doyennette, L., Lanty, G., Choueiry, A. A., Zhang, S., Bréhier, A., Largeau, L., Mauguin, O., Bloch, J., et al. (2010) · Optics Express · doi:10.1364/oe.18.005912 · Cited by 293
Photoconductivity and electroluminescence in lead iodide based natural quantum well structures
Hong, X., Ishihara, T., & Nurmikko, A. V. (1992) · Solid State Communications · doi:10.1016/0038-1098(92)90210-z · Cited by 162
Modeling low cost hybrid tandem photovoltaics with the potential for efficiencies exceeding 20%
Beiley, Z. M., & McGehee, M. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee23073a · Cited by 146
Self-citationPerowskit als Lichtabsorptionsmaterial: ein Durchbruch in der Photovoltaik
Kazim, S., Nazeeruddin, M. K., Grätzel, M., et al. (2014) · Angewandte Chemie · doi:10.1002/ange.201308719 · Cited by 87
Cited by
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Perovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
Self-citation2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Metadata
- Authors
- Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2014-09-04
- Volume
- 53
- Issue
- 42
- Pages
- 11232-11235
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2152034665
- Cited by
- 2,011
- References
- 34
- FWCI
- 58.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.