The DOI matches its Crossref record; 86 of the 86 references it cites were found in a registry or an index.
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Abstract
High energy‐density lithium‐ion batteries are in demand for portable electronic devices and electrical vehicles. Since the energy density of the batteries relies heavily on the cathode material used, major research efforts have been made to develop alternative cathode materials with a higher degree of lithium utilization and specific energy density. In particular, layered, Ni‐rich, lithium transition‐metal oxides can deliver higher capacity at lower cost than the conventional LiCoO 2. However, for these Ni‐rich compounds there are still several problems associated with their cycle life, thermal stability, and safety. Herein the performance enhancement of Ni‐rich cathode materials through structure tuning or interface engineering is summarized. The underlying mechanisms and remaining challenges will also be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
Electrochemistry and Structural Chemistry of LiNiO2 (R3m) for 4 Volt Secondary Lithium Cells
Ohzuku, T., Ueda, A., & Nagayama, M. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220730 · Cited by 1,384
Unlocking the Potential of Cation-Disordered Oxides for Rechargeable Lithium Batteries
Lee, J., Urban, A., Li, X., Su, D., Hautier, G., & Ceder, G. (2014) · Science · doi:10.1126/science.1246432 · Cited by 1,248
Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Nanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
CoO2, The End Member of the Li x CoO2 Solid Solution
Amatucci, G. G., Tarascon, J. M., & Klein, L. C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836594 · Cited by 1,034
The cathode–electrolyte interface in the Li-ion battery
Edström, K., Gustafsson, T., & Thomas, J. O. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.03.049 · Cited by 900
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Recent progress in cathode materials research for advanced lithium ion batteries
Xu, B., Qian, D., Wang, Z., & Meng, Y. S. (2012) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2012.05.003 · Cited by 834
Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni (OH)2 structure
Dahn, J. (1990) · Solid State Ionics · doi:10.1016/0167-2738(90)90049-w · Cited by 806
Comparative study of LiCoO2, LiNi Co O2 and LiNiO2 for 4 volt secondary lithium cells
Ohzuku, T., Ueda, A., Nagayama, M., Iwakoshi, Y., & Komori, H. (1993) · Electrochimica Acta · doi:10.1016/0013-4686(93)80046-3 · Cited by 799
In situ x-ray diffraction and electrochemical studies of Li1−xNiO2
LI, W., Reimers, J. N., & Dahn, J. R. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90317-v · Cited by 745
The Current Move of Lithium Ion Batteries Towards the Next Phase
Kim, T., Park, J., Chang, S. K., Choi, S., Ryu, J. H., & Song, H. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200028 · Cited by 742
Liu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
Surface Characterization of Electrodes from High Power Lithium-Ion Batteries
Andersson, A. M., Abraham, D. P., Haasch, R., MacLaren, S., Liu, J., & Amine, K. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1505636 · Cited by 686
Wang, H., Jang, Y., Huang, B., Sadoway, D. R., & Chiang, Y. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391631 · Cited by 682
Role of surface coating on cathode materials for lithium-ion batteries
Chen, Z., Qin, Y., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00154f · Cited by 672
THE CATHODE-ELECTROLYTE INTERFACE IN A Li-ION BATTERY
EDSTRÖM, K., GUSTAFSSON, T., & THOMAS, J. (2004) · Lithium-Ion Batteries · doi:10.1142/9781860946448_0008 · Cited by 651
Nanostructured electrode materials for electrochemical energy storage and conversion
Manthiram, A., Vadivel Murugan, A., Sarkar, A., & Muraliganth, T. (2008) · Energy & Environmental Science · doi:10.1039/b811802g · Cited by 638
Cathode materials modified by surface coating for lithium ion batteries
Li, C., Zhang, H. P., Fu, L. J., Liu, H., Wu, Y. P., Rahm, E., Holze, R., & Wu, H. Q. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.11.015 · Cited by 624
Nam, K., Bak, S., Hu, E., Yu, X., Zhou, Y., Wang, X., Wu, L., Zhu, Y., Chung, K. Y., & Yang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200693 · Cited by 594
Factors that affect Li mobility in layered lithium transition metal oxides
Kang, K., & Ceder, G. (2006) · Physical Review B · doi:10.1103/physrevb.74.094105 · Cited by 537
Cho, Y., Oh, P., & Cho, J. (2013) · Nano Letters · doi:10.1021/nl304558t · Cited by 501
Self-citationSun, Y., Myung, S., Kim, M., Prakash, J., & Amine, K. (2005) · Journal of the American Chemical Society · doi:10.1021/ja053675g · Cited by 476
Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries
He, P., Yu, H., Li, D., & Zhou, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14305d · Cited by 472
Boulineau, A., Simonin, L., Colin, J.-F., Bourbon, C., & Patoux, S. (2013) · Nano Letters · doi:10.1021/nl4019275 · Cited by 467
Watanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.018 · Cited by 465
Aurbach, D., Ein‐Eli, Y., Markovsky, B., Zaban, A., Luski, S., Carmeli, Y., & Yamin, H. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048659 · Cited by 454
Surface modifications of electrode materials for lithium ion batteries
Fu, L. J., Liu, H., Li, C., Wu, Y. P., Rahm, E., Holze, R., & Wu, H. Q. (2006) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2005.10.019 · Cited by 450
Design and Preparation of Materials for Advanced Electrochemical Storage
Melot, B. C., & Tarascon, J.-M. (2013) · Accounts of Chemical Research · doi:10.1021/ar300088q · Cited by 435
Miller, D. J., Proff, C., Wen, J., Abraham, D. P., & Bareño, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300015 · Cited by 422
An overview of positive-electrode materials for advanced lithium-ion batteries
Ohzuku, T., & Brodd, R. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.154 · Cited by 415
Minimization of the cation mixing in Li1+x(NMC)1−xO2 as cathode material
Zhang, X., Jiang, W. J., Mauger, A., Qilu, Gendron, F., & Julien, C. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.09.029 · Cited by 409
Bak, S.-M., Nam, K.-W., Chang, W., Yu, X., Hu, E., Hwang, S., Stach, E. A., Kim, K.-B., Chung, K. Y., & Yang, X.-Q. (2013) · Chemistry of Materials · doi:10.1021/cm303096e · Cited by 390
Characterization and cathode performance of Li1 − xNi1 + xO2 prepared with the excess lithium method
Arai, H. (1995) · Solid State Ionics · doi:10.1016/0167-2738(95)00144-u · Cited by 365
Lu, Y.-C., Mansour, A. N., Yabuuchi, N., & Shao-Horn, Y. (2009) · Chemistry of Materials · doi:10.1021/cm900862v · Cited by 348
Symmetric cell approach and impedance spectroscopy of high power lithium-ion batteries
Chen, C. H., Liu, J., & Amine, K. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00666-2 · Cited by 347
Hwang, S., Chang, W., Kim, S. M., Su, D., Kim, D. H., Lee, J. Y., Chung, K. Y., & Stach, E. A. (2014) · Chemistry of Materials · doi:10.1021/cm403332s · Cited by 346
Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2
Cho, D.-H., Jo, C.-H., Cho, W., Kim, Y.-J., Yashiro, H., Sun, Y.-K., & Myung, S.-T. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.042406jes · Cited by 340
Self-citationLi2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power
Zhuang, G., Chen, G., Shim, J., Song, X., Ross, P. N., & Richardson, T. J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.030 · Cited by 312
Appapillai, A. T., Mansour, A. N., Cho, J., & Shao‐Horn, Y. (2007) · Chemistry of Materials · doi:10.1021/cm0715390 · Cited by 295
Self-citationLee, M.-J., Lee, S., Oh, P., Kim, Y., & Cho, J. (2014) · Nano Letters · doi:10.1021/nl404430e · Cited by 291
Self-citationRoles of Surface Chemistry on Safety and Electrochemistry in Lithium Ion Batteries
Lee, K. T., Jeong, S., & Cho, J. (2013) · Accounts of Chemical Research · doi:10.1021/ar200224h · Cited by 267
Self-citationNgala, J. K., Chernova, N. A., Ma, M., Mamak, M., Zavalij, P. Y., & Whittingham, M. S. (2004) · Journal of Materials Chemistry · doi:10.1039/b309834f · Cited by 260
Wu, L., Nam, K.-W., Wang, X., Zhou, Y., Zheng, J.-C., Yang, X.-Q., & Zhu, Y. (2011) · Chemistry of Materials · doi:10.1021/cm201452q · Cited by 245
Pouillerie, C., Croguennec, L., Biensan, P., Willmann, P., & Delmas, C. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393486 · Cited by 238
Application of first-principles calculations to the design of rechargeable Li-batteries
Ceder, G., Aydinol, M. K., & Kohan, A. F. (1997) · Computational Materials Science · doi:10.1016/s0927-0256(97)00029-3 · Cited by 233
Myung, S.-T., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00508h · Cited by 230
Cho, J., Kim, T., Kim, J.-S., Noh, M., & Park, B. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1802411 · Cited by 216
Self-citationLee, K.-S., Myung, S., Amine, K., Yashiro, H., & Sun, Y. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2769831 · Cited by 212
Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion Batteries
Cho, Y., Lee, S., Lee, Y., Hong, T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100239 · Cited by 204
Self-citationElectrode–solution interactions in Li-ion batteries: a short summary and new insights
Aurbach, D. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00273-8 · Cited by 177
Nishida, Y., Nakane, K., & Satoh, T. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02535-4 · Cited by 164
Defect Chemistry in Layered LiMO2 (M = Co, Ni, Mn, and Li1/3Mn2/3) by First-Principles Calculations
Koyama, Y., Arai, H., Tanaka, I., Uchimoto, Y., & Ogumi, Z. (2012) · Chemistry of Materials · doi:10.1021/cm3018314 · Cited by 151
Surface modifications of electrode materials for lithium-ion batteries: status and trends
Mauger, A., & Julien, C. M. (2014) · Ionics · doi:10.1007/s11581-014-1131-2 · Cited by 140
Sun, Y., Myung, S., Park, B.-C., & Amine, K. (2006) · Chemistry of Materials · doi:10.1021/cm061746k · Cited by 136
Koenig, G. M., Belharouak, I., Deng, H., Sun, Y., & Amine, K. (2011) · Chemistry of Materials · doi:10.1021/cm200058c · Cited by 131
Li, H. H., Yabuuchi, N., Meng, Y. S., Kumar, S., Bréger, J., Grey, C. P., & Shao‐Horn, Y. (2007) · Chemistry of Materials · doi:10.1021/cm070139+ · Cited by 129
Cho, Y., Lee, Y.-S., Park, S., Lee, Y., & Cho, J. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.08.074 · Cited by 127
Self-citationCho, J., Kim, H., & Park, B. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1790511 · Cited by 123
Self-citationZhang, B., Li, L., & Zheng, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.01.004 · Cited by 121
Wilcox, J. D., Patoux, S., & Doeff, M. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3056109 · Cited by 82
Surface treatment of LiNi0.8Co0.2O2 cathode material for lithium secondary batteries
Ying, J., Wan, C., & Jiang, C. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00795-9 · Cited by 79
Electrochemical Biosensing for Direct Biopsy Slices Screening for Colorectal Cancer Detection
Vernick, S., Freeman, A., Rishpon, J., Niv, Y., Vilkin, A., & Shacham‐Diamand, Y. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3507268 · Cited by 77
Synthesis and Electrochemical Characterization of Divalent Cation-Incorporated Lithium Nickel Oxide
Chang, C., Kim, J. Y., & Kumta, P. N. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393424 · Cited by 71
Gao, P., Li, Y., Liu, H., Pinto, J. L., Jiang, X., & Yang, G. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.010205jes · Cited by 67
Electrochemical properties of ZrO2-coated LiNi0.8Co0.2O2 cathode materials
Lee, S. M., Oh, S. H., Ahn, J. P., Cho, W. I., & Jang, H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.035 · Cited by 61
Self-citationEffects of Co3(PO4)2 coatings on LiNi0.8Co0.16Al0.04O2 cathodes during application of high current
Ryu, K. S., Lee, S. H., Koo, B. K., Lee, J. W., Kim, K. M., & Park, Y. J. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-008-9576-5 · Cited by 58
Park, T. J., Lim, J., & Son, J. (2014) · Bulletin of the Korean Chemical Society · doi:10.5012/bkcs.2014.35.2.357 · Cited by 53
Yoon, S., Jung, K., Yeon, S., et al. (2012) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2012.08.005 · Cited by 49
Nanoscale interface control for high-performance Li-ion batteries
Oh, Y., Nam, S., Wi, S., Hong, S., & Park, B. (2012) · Electronic Materials Letters · doi:10.1007/s13391-012-2058-2 · Cited by 49
Aluminium coordination in LiNi1−yAlyO2 solid solutions
Stoyanova, R. K. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(99)00334-3 · Cited by 45
Synthesis and properties of LiGaxMgyNi1−x−yO2 as cathode material for lithium ion batteries
Yu, A. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00291-5 · Cited by 41
Chang, K., Hallstedt, B., & Mušić, D. (2012) · Calphad · doi:10.1016/j.calphad.2012.02.006 · Cited by 37
Wilcox, J. D., Rodriguez, E. E., & Doeff, M. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3237100 · Cited by 34
Effects of Zn or Ti substitution for Ni on the electrochemical properties of LiNiO2
Kim, H. U., Song, J., Mumm, D. R., & Song, M. Y. (2010) · Ceramics International · doi:10.1016/j.ceramint.2010.10.021 · Cited by 15
Cited by
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Metadata
- Authors
- Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2015-03-20
- Volume
- 54
- Issue
- 15
- Pages
- 4440-4457
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2138111906
- Cited by
- 1,960
- References
- 86
- FWCI
- 61.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.