The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Catholyte‐Free Electrocatalytic CO2 Reduction to Formate
Abstract
Electrochemical reduction of carbon dioxide (CO 2) into value‐added chemicals is a promising strategy to reduce CO 2 emission and mitigate climate change. One of the most serious problems in electrocatalytic CO 2 reduction (CO 2 R) is the low solubility of CO 2 in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO 2 reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm−2, despite the decrease in CO 2 solubility. Furthermore, a significantly high formate concentration of 41.5 g L−1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm−2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels
Qiao, J., Liu, Y., Hong, F., & Zhang, J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60323g · Cited by 2,990
Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel
Gao, S., Lin, Y., Jiao, X., Sun, Y., Luo, Q., Zhang, W., Li, D., Yang, J., & Xie, Y. (2016) · Nature · doi:10.1038/nature16455 · Cited by 1,865
Del Castillo, A., Alvarez-Guerra, M., Solla-Gullón, J., Sáez, A., Montiel, V., & Irabien, A. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.021 · Cited by 189
Electrochemical reduction of CO2 to formate at high current density using gas diffusion electrodes
Kopljar, D., Inan, A., Vindayer, P., Wagner, N., & Klemm, E. (2014) · Journal of Applied Electrochemistry · doi:10.1007/s10800-014-0731-x · Cited by 178
Lu, W., Jia, B., Cui, B., Zhang, Y., Yao, K., Zhao, Y., & Wang, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703977 · Cited by 120
Cited by
Burdyny, T., & Smith, W. A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03134g · Cited by 1,133
Xia, C., Zhu, P., Jiang, Q., Pan, Y., Liang, W., Stavitski, E., Alshareef, H. N., & Wang, H. (2019) · Nature Energy · doi:10.1038/s41560-019-0451-x · Cited by 782
Han, N., Ding, P., He, L., Li, Y., & Li, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902338 · Cited by 655
Photoelectrochemical Conversion of Carbon Dioxide (CO2) into Fuels and Value-Added Products
Kumaravel, V., Bartlett, J., & Pillai, S. C. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02585 · Cited by 628
De Gregorio, G. L., Burdyny, T., Loiudice, A., Iyengar, P., Smith, W. A., & Buonsanti, R. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c00297 · Cited by 582
Metadata
- Authors
- Lee, W., Kim, Y. E., Youn, M. H., Jeong, S. K., & Park, K. T.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2018-05-08
- Volume
- 57
- Issue
- 23
- Pages
- 6883-6887
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2801552260
- Cited by
- 209
- References
- 5
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.