CoChat

Chemical Fueling Enables Molecular Complexification of Self‐Replicators**

Open access
Yang, Shuo, Schaeffer, Gael, Mattia, Elio, Markovitch, Omer, Liu, Kai, Hussain, Andreas S., Ottelé, Jim, Sood, Ankush, Otto, Sijbren · 2021 · Angewandte Chemie International Edition

Published version of a preprint

The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.

Abstract

Unravelling how the complexity of living systems can (have) emerge(d) from simple chemical reactions is one of the grand challenges in contemporary science. Evolving systems of self‐replicating molecules may hold the key to this question. Here we show that, when a system of replicators is subjected to a regime where replication competes with replicator destruction, simple and fast replicators can give way to more complex and slower ones. The structurally more complex replicator was found to be functionally more proficient in the catalysis of a model reaction. These results show that chemical fueling can maintain systems of replicators out of equilibrium, populating more complex replicators that are otherwise not readily accessible. Such complexification represents an important requirement for achieving open‐ended evolution as it should allow improved and ultimately also new functions to emerge.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/anie.202016196

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic representation of assembly‐driven self‐replication in a replication–destruction regime. A) Mechanism of self‐replication. Dithiol building block 1 is oxidized to give rise to a mixture of interconverting disulfides of different ring size. Slow nucleation of a stack of one particular ring size is followed by elongation of the stack. When the stack is sufficiently long to be susceptible to mechanical energy the system enters a breakage–elongation cycle leading to exponential growth of the fibers and the macrocycles from which they are constituted. B) Simplified representation of the replication–destruction regime achieved upon constant simultaneous addition of oxidant and reductant. NaBO3 oxidizes the dithiol building block into a mixture of different disulfide macrocycles, from which two competing replicators can grow. TCEP reduces the disulfides in the non‐assembled macrocycles as well as in the assembled replicating macrocycles back to the thiol building block. The thickness of the arrows indicates the magnitude of the fluxes (in units of 1) through the various pathways in a kinetic model of the reaction network (SI Section S5). The flux through the short‐circuiting reaction of perborate with TCEP (not shown) accounts for less than 0.1 % of the total flux.
Figure 1 Schematic representation of assembly‐driven self‐replication in a replication–destruction regime. A) Mechanism of self‐replication. Dithiol building block 1 is oxidized to give rise to a mixture of interconverting disulfides of different ring size. Slow nucleation of a stack of one particular ring size is followed by elongation of the stack. When the stack is sufficiently long to be susceptible to mechanical energy the system enters a breakage–elongation cycle leading to exponential growth of the fibers and the macrocycles from which they are constituted. B) Simplified representation of the replication–destruction regime achieved upon constant simultaneous addition of oxidant and reductant. NaBO3 oxidizes the dithiol building block into a mixture of different disulfide macrocycles, from which two competing replicators can grow. TCEP reduces the disulfides in the non‐assembled macrocycles as well as in the assembled replicating macrocycles back to the thiol building block. The thickness of the arrows indicates the magnitude of the fluxes (in units of 1) through the various pathways in a kinetic model of the reaction network (SI Section S5). The flux through the short‐circuiting reaction of perborate with TCEP (not shown) accounts for less than 0.1 % of the total flux.CC BY-NC-ND · PubMed Central
Figure 2 Self‐assembly‐driven self‐replication of 1 3 and 1 6. A) Change in product distribution with time of a mixture made from dithiol building block 1 (0.19 mm) in borate buffer (pH 8.2) in the presence of 2.5 m guanidinium chloride. B) TEM analysis of the mixture dominated by trimers after shaking at 1200 rpm at room temperature for two weeks (scale bar=200 nm); Change in product distribution with time of a pre‐oxidized sample made from 1 (0.19 mm) in borate buffer pH 8.2 in the presence of 1.5 m guanidinium chloride in the absence and presence of various initial amounts of seeds of C) 1 3 replicator and D) 1 6 replicator. Seeding % are expressed in units of 1 relative to the total number of units of 1. Note that the data in (C) and (D) cannot be compared directly as the experiments are started at different oxidation levels (see SI Figure S4 for details). Lines are drawn to guide the eye.
Figure 2 Self‐assembly‐driven self‐replication of 1 3 and 1 6. A) Change in product distribution with time of a mixture made from dithiol building block 1 (0.19 mm) in borate buffer (pH 8.2) in the presence of 2.5 m guanidinium chloride. B) TEM analysis of the mixture dominated by trimers after shaking at 1200 rpm at room temperature for two weeks (scale bar=200 nm); Change in product distribution with time of a pre‐oxidized sample made from 1 (0.19 mm) in borate buffer pH 8.2 in the presence of 1.5 m guanidinium chloride in the absence and presence of various initial amounts of seeds of C) 1 3 replicator and D) 1 6 replicator. Seeding % are expressed in units of 1 relative to the total number of units of 1. Note that the data in (C) and (D) cannot be compared directly as the experiments are started at different oxidation levels (see SI Figure S4 for details). Lines are drawn to guide the eye.CC BY-NC-ND · PubMed Central
Figure 3 Comparison of the growth and/or decline of replicators 1 3 and 1 6 under different conditions. A) In a mixture of replicators 1 3 and 1 6 and non‐assembled 1 3 and 1 4 macrocycles (in a 15:30:55 ratio in units of building block) 1 3 replicates faster than 1 6. The 0.50 mL sample was shaken at 1200 rpm in the presence of oxygen from the air. B) Change in product distribution with time of a mixture made from replicators 1 3 and 1 6 (approximately equimolar in units of 1) in 1.5 m guanidinium chloride in the presence of 10 mol % dithiol 1. Total [1]=0.19 mm. C) Decrease in UPLC peak area of replicators 1 3 (blue triangles) and 1 6 (red circles) and corresponding increase in peak area of monomer 1 (black squares) upon reduction of a mixture of these replicators (0.095 mm each in units of building block 1) to different extents by adding 8, 20, and 40 mol % TCEP (with respect to units of 1). Error bars show the standard deviations of three independent repeats. For a statistical analysis, see SI Section S4.5. Note that hexamer‐to‐trimer conversion is insignificant on the timescale of the reduction experiments. All samples were prepared in borate buffer (50 mm, pH 8.2) containing 1.5 m guanidinium chloride. Lines in (A) and (B) are drawn to guide the eye.
Figure 3 Comparison of the growth and/or decline of replicators 1 3 and 1 6 under different conditions. A) In a mixture of replicators 1 3 and 1 6 and non‐assembled 1 3 and 1 4 macrocycles (in a 15:30:55 ratio in units of building block) 1 3 replicates faster than 1 6. The 0.50 mL sample was shaken at 1200 rpm in the presence of oxygen from the air. B) Change in product distribution with time of a mixture made from replicators 1 3 and 1 6 (approximately equimolar in units of 1) in 1.5 m guanidinium chloride in the presence of 10 mol % dithiol 1. Total [1]=0.19 mm. C) Decrease in UPLC peak area of replicators 1 3 (blue triangles) and 1 6 (red circles) and corresponding increase in peak area of monomer 1 (black squares) upon reduction of a mixture of these replicators (0.095 mm each in units of building block 1) to different extents by adding 8, 20, and 40 mol % TCEP (with respect to units of 1). Error bars show the standard deviations of three independent repeats. For a statistical analysis, see SI Section S4.5. Note that hexamer‐to‐trimer conversion is insignificant on the timescale of the reduction experiments. All samples were prepared in borate buffer (50 mm, pH 8.2) containing 1.5 m guanidinium chloride. Lines in (A) and (B) are drawn to guide the eye.CC BY-NC-ND · PubMed Central
Figure 4 Population of a disfavored and slow replicator is possible in a chemically fueled replication–destruction regime. A) Potential energy landscape in which replicators 1 3 and 1 6 compete for building block 1 qualitatively showing the energy barriers for the replication (black line) and destruction (blue line) pathways. The formation of each replicator from building block 1 is coupled to the conversion of oxidant (ox) into waste (w), while the disassembly of replicators back into building block is coupled to the conversion of reducing agent (rd) into waste. It proved hard to unambiguously determine the relative thermodynamic stability of replicators 1 3 and 1 6; see SI Figure S7 and the discussion below this Figure. B) Evolution of the product distribution with time upon continuous and simultaneous addition of TCEP and NaBO3 solutions to a mixture initially containing replicators 1 3 and 1 6 and non‐assembled 1, 1 3 and 1 4 (overall 0.19 mm in 1) in 50 mm borate buffer (pH 8.2) containing 1.5 m guanidinium chloride. The black arrow indicates the moment that the addition of NaBO3 was stopped. Lines are drawn to guide the eye. Five repeats of this experiment show that the behavior is qualitatively reproducible (see SI Figure S2).
Figure 4 Population of a disfavored and slow replicator is possible in a chemically fueled replication–destruction regime. A) Potential energy landscape in which replicators 1 3 and 1 6 compete for building block 1 qualitatively showing the energy barriers for the replication (black line) and destruction (blue line) pathways. The formation of each replicator from building block 1 is coupled to the conversion of oxidant (ox) into waste (w), while the disassembly of replicators back into building block is coupled to the conversion of reducing agent (rd) into waste. It proved hard to unambiguously determine the relative thermodynamic stability of replicators 1 3 and 1 6; see SI Figure S7 and the discussion below this Figure. B) Evolution of the product distribution with time upon continuous and simultaneous addition of TCEP and NaBO3 solutions to a mixture initially containing replicators 1 3 and 1 6 and non‐assembled 1, 1 3 and 1 4 (overall 0.19 mm in 1) in 50 mm borate buffer (pH 8.2) containing 1.5 m guanidinium chloride. The black arrow indicates the moment that the addition of NaBO3 was stopped. Lines are drawn to guide the eye. Five repeats of this experiment show that the behavior is qualitatively reproducible (see SI Figure S2).CC BY-NC-ND · PubMed Central
Figure 5 The more complex replicator is a more proficient catalyst. A) Retro‐aldol reaction used as a model reaction to assess the catalytic proficiencies of the competing replicators. B) Kinetic data, averaged over three repeats, comparing the production of retro‐aldol product 3 catalyzed by replicator 1 6 (red circles) with the effects of replicator 1 3 (blue triangles), a mixture of non‐assembled 1 3 and 1 4 (green triangles), and monomer 1 (black squares). The background reaction in the absence of 1 or any of its oligomers is shown in blue circles and coincides with the data for the reaction in the presence of 1. The concentrations of the various species were 25 μm (in units of 1) in borate buffer (50 mm, pH 8.12) containing 1.5 m guanidinium chloride and 0.20 mm substrate 2. Shaded areas show the standard deviation and lines are drawn to guide the eye. For a detailed mechanistic analysis of the retro‐aldol reaction catalyzed by 1 6, see ref. [34]. For a repeat of the experiment at higher concentrations and temperature to give a higher conversion, see SI Figure S25.
Figure 5 The more complex replicator is a more proficient catalyst. A) Retro‐aldol reaction used as a model reaction to assess the catalytic proficiencies of the competing replicators. B) Kinetic data, averaged over three repeats, comparing the production of retro‐aldol product 3 catalyzed by replicator 1 6 (red circles) with the effects of replicator 1 3 (blue triangles), a mixture of non‐assembled 1 3 and 1 4 (green triangles), and monomer 1 (black squares). The background reaction in the absence of 1 or any of its oligomers is shown in blue circles and coincides with the data for the reaction in the presence of 1. The concentrations of the various species were 25 μm (in units of 1) in borate buffer (50 mm, pH 8.12) containing 1.5 m guanidinium chloride and 0.20 mm substrate 2. Shaded areas show the standard deviation and lines are drawn to guide the eye. For a detailed mechanistic analysis of the retro‐aldol reaction catalyzed by 1 6, see ref. [34]. For a repeat of the experiment at higher concentrations and temperature to give a higher conversion, see SI Figure S25.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 40 references

Research works printed but not linked: 2

  1. Mattia E., 2017, Synlett, 28, 103
  2. Hossain M. M., 2021, Angew. Chem. Int. Ed.

Cited by

Metadata

Authors
Yang, S., Schaeffer, G., Mattia, E., Markovitch, O., Liu, K., Hussain, A. S., Ottelé, J., Sood, A., & Otto, S.
Affiliations
  • University of Groningen (NL)
  • Centre for Systems Chemistry Stratingh Institute University of Groningen Nijenborgh 4 9747 AG Groningen The Netherlands
Corresponding author
Otto, Sijbren
Venue
Angewandte Chemie International Edition
Publisher
Wiley
Published
2021-04-08
Volume
60
Issue
20
Pages
11344-11349
ISSN
  • 1433-7851 (ISSN-L)
  • 1521-3773
OpenAlex
W3134464837
Cited by
86
References
39
Citations by year
2026: 8 · 2025: 12 · 2024: 18 · 2023: 19 · 2022: 15 · 2021: 14
FWCI
8.87
Type
journal article
Language
en
Open access
Locations
  • Angewandte Chemie International Edition (publishedVersion, cc-by-nc-nd)
  • ChemRxiv (acceptedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • University of Groningen research database (University of Groningen / Centre for Information Technology) (publishedVersion, cc-by-nc-nd)
  • Figshare (submittedVersion, cc-by-nc-nd)
  • University of Groningen research database (University of Groningen / Centre for Information Technology) (submittedVersion, cc-by-nc-nd)
Funders
European Research Council (AdG 741774)
Topics
  • Physical Sciences › Physics and Astronomy › Astronomy and Astrophysics › Origins and Evolution of Life
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Genetics › Evolution and Genetic Dynamics
  • Physical Sciences › Chemistry › Organic Chemistry › Supramolecular Chemistry and Complexes
Keywords
self-replicating molecules, complexification, nonequilibrium systems, catalysis, open-ended evolution, origin of life, molecular complexity

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.