The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium‐Ion Batteries
Abstract
Uncontrolled Li plating in graphite electrodes endangers battery life and safety, driving tremendous efforts aiming to eliminate Li plating. Herein we systematically investigate the boundary of Li plating in graphite electrode for safe lithium‐ion batteries. The cell exhibits superior safety performance than that with Li dendrites by defining the endurable amount of uniform Li plating in graphite anode. The presence of “dead Li” can be eliminated owing to the uniform distribution of Li plating, and the average Coulombic efficiency for deposited Li during reversible plating/stripping process is decoupled as high as about 99.5 %. Attributing to the limited Li plating with superior Coulombic efficiency, the LiNi 0.5 Mn 0.3 Co 0.2 O 2 | graphite cell achieves a high capacity retention of 80.2 % over 500 cycles. This work sheds a different light on further improving the fast‐charging capability, low‐temperature performance, and energy density of practical lithium‐ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Cited by
Electrolyte design for Li-ion batteries under extreme operating conditions
Xu, J., Zhang, J., Pollard, T. P., Li, Q., Tan, S., Hou, S., Wan, H., Chen, F., He, H., Hu, E., et al. (2023) · Nature · doi:10.1038/s41586-022-05627-8 · Cited by 970
Challenges and advances in wide-temperature rechargeable lithium batteries
Feng, Y., Zhou, L., Ma, H., Wu, Z., Zhao, Q., Li, H., Zhang, K., & Chen, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03292e · Cited by 517
Fundamentals, status and challenges of direct recycling technologies for lithium ion batteries
Ji, H., Wang, J., Ma, J., Cheng, H.-M., & Zhou, G. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00254c · Cited by 385
Yang, Y., Fang, Z., Yin, Y., Cao, Y., Wang, Y., Dong, X., & Xia, Y. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202208345 · Cited by 143
The Dilemma of C-Rate and Cycle Life for Lithium-Ion Batteries under Low Temperature Fast Charging
Gao, Z., Xie, H., Yang, X., Niu, W., Li, S., & Chen, S. (2022) · Batteries · doi:10.3390/batteries8110234 · Cited by 70
Metadata
- Authors
- Cai, W., Yan, C., Yao, Y., Xu, L., Chen, X., Huang, J., & Zhang, Q.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2021-05-05
- Volume
- 60
- Issue
- 23
- Pages
- 13007-13012
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W3146632696
- Cited by
- 271
- References
- 2
- FWCI
- 12.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium‐Ion Batteries. https://app.cochat.ai/papers/10.1002/anie.202102593
- The paper
- Cai, W., Yan, C., Yao, Y., Xu, L., Chen, X., Huang, J., & Zhang, Q. (2021). The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium‐Ion Batteries. Angewandte Chemie International Edition. https://doi.org/10.1002/anie.202102593
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.