Poly(L‐lactide). IX. Hydrolysis in acid media
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Amorphous and crystallized poly(L‐lactide) (PLLA) films are prepared by quenching and annealing at 140°C for 600 min, respectively, from the melt. Their hydrolysis is investigated at pH 2.0 in HCl and DL‐lactic acid (DLLA) solutions (37°C) for up to 300 days, and the results are compared with those obtained for PLLA films hydrolyzed at pH 7.4 (phosphate‐buffered solution) and pH 12 (NaOH solution). The changes in the weight loss and molecular weight distribution of the PLLA films during hydrolysis in the acid media reveals that their hydrolysis proceeds homogeneously along the film cross section by mainly a bulk erosion mechanism. Moreover, the durability of PLLA films in the acid media is very similar to that in the neutral medium but higher than that in the alkaline medium. The hydrolysis rate constant values (k) of the initially amorphous PLLA0 film evaluated from the changes in the number‐average molecular weight were 3.0 and 2.4 × 10−3 day−1 at pH 2.0 in the HCl and DLLA solutions, respectively. These k values are very similar to 2.6 × 10−3 day−1 at pH 7.4 in the phosphate‐buffered solution. The similar k values and the negligible weight loss after the hydrolysis for 300 days reflect that the hydronium ions and the lactic acid oligomers and monomers have insignificant catalytic effects on the hydrolysis of the PLLA films. Increasing the initial crystallinity of the PLLA film increases the hydrolysis rate in the HCl solution, whereas increasing the initial crystallinity of the PLLA film does not alter the hydrolysis rate in the DLLA solution. The differential scanning calorimetry results show that the crystallization of PLLA chains occurs during the hydrolysis, irrespective of the hydrolysis acid media and the initial crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 186–194, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Tsuji, H., & Ikada, Y. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00111-1 · Cited by 329
Self-citationFurther investigations on the hydrolytic degradation of poly (DL-lactide)
Li, S., & McCarthy, S. (1999) · Biomaterials · doi:10.1016/s0142-9612(97)00226-3 · Cited by 301
Tsuji, H., & Miyauchi, S. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00191-9 · Cited by 204
Self-citationChain-end scission in acid catalyzed hydrolysis of poly (d,l-lactide) in solution
Shih, C. (1995) · Journal of Controlled Release · doi:10.1016/0168-3659(94)00100-9 · Cited by 159
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
New advances in the biodegradation of Poly(lactic) acid
Qi, X., Ren, Y., & Wang, X. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.01.010 · Cited by 462
Polylactic acid (PLA): Research, development and industrialization
Pang, X., Zhuang, X., Tang, Z., & Chen, X. (2010) · Biotechnology Journal · doi:10.1002/biot.201000135 · Cited by 435
Croll, T. I., O'Connor, A. J., Stevens, G. W., & Cooper-White, J. J. (2004) · Biomacromolecules · doi:10.1021/bm0343040 · Cited by 402
Mechanical study of PLA–PCL fibers during in vitro degradation
Vieira, A. C., Vieira, J. C., Ferra, J. M., Magalhães, F. D., Guedes, R. M., & Marques, A. T. (2011) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2010.12.006 · Cited by 266
Kale, G., Auras, R., & Singh, S. P. (2007) · Packaging Technology and Science · doi:10.1002/pts.742 · Cited by 179
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
In vitro hydrolysis of poly(l-lactide) crystalline residues as extended-chain crystallites
Tsuji, H., & Ikarashi, K. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.03.004 · Cited by 96
Self-citationMayer, J. B., Patil, S. M., Shin, S.-H., Yoo, J., & Won, Y.-Y. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00419 · Cited by 38
Sukkhum, S. (2012) · Journal of Microbiology and Biotechnology · doi:10.4014/jmb.1105.05016 · Cited by 32
Metadata
- Authors
- Tsuji, H., & Nakahara, K.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-07-23
- Volume
- 86
- Issue
- 1
- Pages
- 186-194
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1992505619
- Cited by
- 124
- References
- 7
- FWCI
- 3.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.