The DOI matches its Crossref record.
Relation of certain infrared bands to cellulose crystallinity and crystal lattice type. Part II. A new infrared ratio for estimation of crystallinity in celluloses I and II
Abstract
A new infrared ratio, α1372 cm. −1/α2900 cm. −1, is proposed for measuring crystallinity in cellulosic materials. The advantage of this ratio over others which have been used is that it can be applied to both celluloses I and II and, therefore, to samples containing a mixed lattice. Two series of samples, encompassing a wide range of crystallinity, were prepared from highly crystalline celluloses I and II. The infrared ratios of these samples were compared with crystallinity values from x-ray diffractograms and density measurements, and with accessibility data from moisture sorption. It was shown that the new infrared ratio ranks samples of both lattice types, as well as partly mercerized cottons, in the same order as do x-ray, density, and moisture sorption data. The correlation of the new infrared ratio with accessibility, derived from moisture regain, is better than with crystallinities from either x-ray or density measurements. Reasons for this are suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Extraction of cellulose and preparation of nanocellulose from sisal fibers
Morán, J. I., Alvarez, V. A., Cyras, V. P., & Vázquez, A. (2008) · Cellulose · doi:10.1007/s10570-007-9145-9 · Cited by 1,507
Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose
Schwanninger, M., Rodrigues, J. C., Pereira, H., & Hinterstoisser, B. (2004) · Vibrational Spectroscopy · doi:10.1016/j.vibspec.2004.02.003 · Cited by 1,368
Nam, S., French, A. D., Condon, B. D., & Concha, M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.035 · Cited by 703
Kumar, A., Singh Negi, Y., Choudhary, V., & Kant Bhardwaj, N. (2020) · Journal of Materials Physics and Chemistry · doi:10.12691/jmpc-2-1-1 · Cited by 682
Isolation of nanocellulose from pineapple leaf fibres by steam explosion
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.046 · Cited by 673
Abidi, N., Cabrales, L., & Haigler, C. H. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.074 · Cited by 658
Structural FTIR analysis and thermal characterisation of lyocell and viscose-type fibres
Carrillo, F., Colom, X., Suñol, J. J., & Saurina, J. (2004) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.05.003 · Cited by 656
Karimi, K., & Taherzadeh, M. J. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.11.022 · Cited by 636
Structural analysis of photodegraded wood by means of FTIR spectroscopy
Colom, X., Carrillo, F., Nogués, F., & Garriga, P. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00051-x · Cited by 635
Composition, structure and thermal degradation of hemp cellulose after chemical treatments
Ouajai, S., & Shanks, R. A. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.016 · Cited by 601
Comparison and assessment of methods for cellulose crystallinity determination
Salem, K. S., Kasera, N. K., Rahman, M. A., Jameel, H., Habibi, Y., Eichhorn, S. J., French, A. D., Pal, L., & Lucia, L. A. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00569g · Cited by 600
Garside, P., & Wyeth, P. (2003) · Studies in Conservation · doi:10.1179/sic.2003.48.4.269 · Cited by 561
Fourier Transform Infrared Spectroscopy for Natural Fibres
Fan, M., Dai, D., & Huang, B. (2012) · Fourier Transform - Materials Analysis · doi:10.5772/35482 · Cited by 555
Regenerating cellulose from ionic liquids for an accelerated enzymatic hydrolysis
Zhao, H., Jones, C. L., Baker, G. A., Xia, S., Olubajo, O., & Person, V. N. (2009) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2008.08.009 · Cited by 492
Åkerholm, M., Hinterstoisser, B., & Salmén, L. (2004) · Carbohydrate Research · doi:10.1016/j.carres.2003.11.012 · Cited by 433
Effects of ball milling on the structure of cotton cellulose
Ling, Z., Wang, T., Makarem, M., Santiago Cintrón, M., Cheng, H. N., Kang, X., Bacher, M., Potthast, A., Rosenau, T., King, H., et al. (2019) · Cellulose · doi:10.1007/s10570-018-02230-x · Cited by 406
Li, Q., He, Y.-C., Xian, M., Jun, G., Xu, X., Yang, J.-M., & Li, L.-Z. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.02.040 · Cited by 360
Rongpipi, S., Ye, D., Gomez, E. D., & Gomez, E. W. (2019) · Frontiers in Plant Science · doi:10.3389/fpls.2018.01894 · Cited by 343
Crystallinity changes in lyocell and viscose-type fibres by caustic treatment
Colom, X., & Carrillo, F. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(02)00132-5 · Cited by 336
Tan, Y. T., Ngoh, G. C., & Chua, A. S. M. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.02.010 · Cited by 325
Physical and mechanical properties of microcrystalline cellulose prepared from agricultural residues
ELSAKHAWY, M., & HASSAN, M. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.04.009 · Cited by 321
A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches
Qing, Y., Sabo, R., Zhu, J. Y., Agarwal, U., Cai, Z., & Wu, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.086 · Cited by 311
Pre-treatment of lignocellulosic biomass using ionic liquids: Wheat straw fractionation
da Costa Lopes, A. M., João, K. G., Rubik, D. F., Bogel-Łukasik, E., Duarte, L. C., Andreaus, J., & Bogel-Łukasik, R. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.05.032 · Cited by 299
Studies on cellulose nanocrystals isolated from groundnut shells
Bano, S., & Negi, Y. S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.10.069 · Cited by 294
Unpolluted fractionation of wheat straw by steam explosion and ethanol extraction
Hongzhang, C., & Liying, L. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2006.02.029 · Cited by 291
Catalytic transformation of cellulose into platform chemicals
Yabushita, M., Kobayashi, H., & Fukuoka, A. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.01.052 · Cited by 289
Široký, J., Blackburn, R. S., Bechtold, T., Taylor, J., & White, P. (2010) · Cellulose · doi:10.1007/s10570-009-9378-x · Cited by 288
Enhancement of enzymatic saccharification of cellulose by cellulose dissolution pretreatments
Kuo, C.-H., & Lee, C.-K. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.12.003 · Cited by 282
Influence of TEMPO-oxidized cellulose nanofibril length on film properties
Fukuzumi, H., Saito, T., & Isogai, A. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.04.069 · Cited by 258
Enhanced enzymatic hydrolysis of sugarcane bagasse by N-methylmorpholine-N-oxide pretreatment
Kuo, C.-H., & Lee, C.-K. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.07.001 · Cited by 156
Ilharco, L. M., Garcia, A. R., Lopes da Silva, J., & Vieira Ferreira, L. F. (1997) · Langmuir · doi:10.1021/la962138u · Cited by 137
Feng, Y., Li, Q., Kang, G., Ji, G., Tang, Y., & Tu, J. (2016) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4587 · Cited by 15
Metadata
- Authors
- Nelson, M. L., & O'Connor, R. T.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1964-05
- Volume
- 8
- Issue
- 3
- Pages
- 1325-1341
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2061037898
- Cited by
- 941
- References
- 0
- FWCI
- 2.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.