Resorbable materials of poly(L‐lactide). II. Fibers spun from solutions of poly(L‐lactide) in good solvents
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Fibers of poly(L‐lactide) (PLLA) with a tensile strength up to 1.2 GPa and Young's modulus in the range of 12–15 GPA were obtained by a hot drawing of fibers spun from solution of PLLA in good solvents such as dichloromethane and trichloromethane. The tensile strength of fibers was strongly dependent on the molecular weight of PLLA and on polymer concentrations in the spinning solution. Changing of the polymer concentration in the spinning solution gives rise to formation of fibers with different shape and porosity. Fibers spun from 10–20% solutions at room temperature exhibit a regular structurization, due to the melt fracture. These fibers had knot strengths up to 0.6 GPa, whereas fibers with a smooth surface spun from more dilute solutions had weaker square knots up to 0.3 GPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Ultra‐high‐modulus linear polyethylene through controlled molecular weight and drawing
Capaccio, G., & Ward, I. M. (1975) · Polymer Engineering & Science · doi:10.1002/pen.760150316 · Cited by 112
Cited by
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Biopolymers: overview of several properties and consequences on their applications
Van de Velde, K., & Kiekens, P. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00107-6 · Cited by 887
Late degradation tissue response to poly(?-lactide) bone plates and screws
Bergsma, J. (1995) · Biomaterials · doi:10.1016/0142-9612(95)91092-d · Cited by 799
Resorbable poly(L-lactide) plates and screws for the fixation of zygomatic fractures
Bos, R. R. M., Boering, G., Rozema, F. R., & Leenslag, J. W. (1987) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/0278-2391(87)90194-7 · Cited by 324
Metadata
- Authors
- Gogolewski, S., & Pennings, A. J.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 1983-03
- Volume
- 28
- Issue
- 3
- Pages
- 1045-1061
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W2154674798
- Cited by
- 113
- References
- 2
- FWCI
- 1.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Resorbable materials of poly(L‐lactide). II. Fibers spun from solutions of poly(L‐lactide) in good solvents. https://app.cochat.ai/papers/10.1002/app.1983.070280312
- The paper
- Gogolewski, S., & Pennings, A. J. (1983). Resorbable materials of poly(L‐lactide). II. Fibers spun from solutions of poly(L‐lactide) in good solvents. Journal of Applied Polymer Science. https://doi.org/10.1002/app.1983.070280312
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.