Cited by 404Thermal and Kinetic AnalysisPolymer Science and PVCPolymer crystallization and properties

The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.

Thermal degradation of segmented polyurethanes

Open access

Petrović, Zoran S., Zavargo, Zoltan, Flyn, Joseph H., Macknight, William J.·1994·Journal of Applied Polymer Science

DOI 10.1002/app.1994.070510615

Open this paper in CoChat — free account Open PDF

Abstract

Abstract Thermal degradation of polyurethane samples was studied by a thermogravimetric method. The effect of soft‐segment length and soft‐segment concentration on activation energy of the degradation process was measured. Three methods of calculation gave activation energies at different stages of the very complex weight loss process. It was shown that at initial stages of the weight loss the process was dominated by hard‐segment degradation. Activation energy of the whole process calculated by the Ozawa–Flynn method did not offer clear insight into the structure–stability relationship of polyurethanes. The second method showed that activation energy of the initial stage of degradation increased with decrease in hard‐segment length. The Flynn method of calculating activation energy produced fairly constant activation energy of the first 40% degradation, at around 150 kJ/mol, for polymers in the C series. Generally, calculation of kinetic parameters of a complex degradation process as in polyurethanes gives results that are not easy to interpret. It has been shown qualitatively that polymers with higher soft‐segment concentration display lower initial weight loss and higher onset temperatures of degradation. © 1994 John Wiley & Sons, Inc.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1002/app.1994.070510615

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

A New Method of Analyzing Thermogravimetric Data
Ozawa, T. (1965) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.38.1881 · Cited by 6,996
A quick, direct method for the determination of activation energy from thermogravimetric data
Flynn, J. H., & Wall, L. A. (1966) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1966.110040504 · Cited by 3,271
Polyurethane elastomers
Petrovìć, Z. S., & Ferguson, J. W. (1991) · Progress in Polymer Science · doi:10.1016/0079-6700(91)90011-9 · Cited by 911
Reliability of methods for determination of kinetic parameters from thermogravimetry and DSC measurements
Petrovìć, Z. S., & Zavargo, Z. Z. (1986) · Journal of Applied Polymer Science · doi:10.1002/app.1986.070320406 · Cited by 99
Self-citation
The Reactions of Isocyanates and Isocyanate Derivatives at Elevated Temperatures
Saunders, J. H. (1959) · Rubber Chemistry and Technology · doi:10.5254/1.3542399 · Cited by 99
Mechanism of thermal degradation of polyurethanes investigated by direct pyrolysis in the mass spectrometer
Ballistreri, A., Foti, S., Maravigna, P., Montaudo, G., & Scamporrino, E. (1980) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1980.170180628 · Cited by 95
Comparative study of various methods for thermogravimetric analysis of polystyrene degradation
Nishizaki, H., Yoshida, K.-I., & Wang, J. H. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070251218 · Cited by 92
Thermal stability of segmented polyurethanes
Ferguson, J. W., & Petrovìć, Z. S. (1976) · European Polymer Journal · doi:10.1016/0014-3057(76)90050-1 · Cited by 89
Mechanism of thermal degradation of polyurethane based on MDI and propoxylated trimethylol propane
Gaboriaud, F., & Vantelon, J. P. (1982) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1982.170200809 · Cited by 83
Initial kinetic parameters from thermogravimetric rate and conversion data
Flynn, J. H., & Wall, L. A. (1967) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1967.110050211 · Cited by 74

Show all 18 references

Research works printed but not linked: 8

Stepanyan S. A., 1972, Vysokomol. Soyed. Ser. B, 14, 246
Belyakov V. K., 1971, Vysokomol. Soyed. Ser. A, 13, 1585
Dyer E., 1972, J. Polym. Sci., 8, 1499
Vieweg R., 1966, Kunstoff‐Handbuch, Band VII, Polyurethane, 37
Z.Petrović PhD Thesis University of Strathclyde Glasgow 1974.
Blymenfel'd A. B., 1967, Vysokomol. Soyed., 9, 1587
Ferguson Z. Petrović and J., 1978, Hemijska Indust., 9, 610
Flynn J. H., 1978, Thermal Methods in Polymer Analysis, 163

Sorted by citations

Thermal stability and flame retardancy of polyurethanes
Chattopadhyay, D. K., & Webster, D. C. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.06.002 · Cited by 1,747
Degradation and stabilization of polyurethane elastomers
Xie, F., Zhang, T., Bryant, P., Kurusingal, V., Colwell, J. M., & Laycock, B. G. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.12.003 · Cited by 740
Thermal stability of polyurethanes based on vegetable oils
Javni, I., Petrovìć, Z. S., Guo, A., & Fuller, R. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000822)77:8 · Cited by 405
Preparation and characterization of polyurethane–carbon nanotube composites
Xia, H., & Song, M. (2005) · Soft Matter · doi:10.1039/b509038e · Cited by 319
Polymer/montmorillonite nanocomposites with improved thermal properties
Leszczyńska, A., Njuguna, J., Pielichowski, K., & Banerjee, J. (2006) · Thermochimica Acta · doi:10.1016/j.tca.2006.11.003 · Cited by 316
Fatty Acid-Derived Diisocyanate and Biobased Polyurethane Produced from Vegetable Oil: Synthesis, Polymerization, and Characterization
Hojabri, L., Kong, X., & Narine, S. S. (2009) · Biomacromolecules · doi:10.1021/bm801411w · Cited by 278
Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: II. Foams
Narine, S. S., Kong, X., Bouzidi, L., & Sporns, P. (2006) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-006-1008-2 · Cited by 259
Halogen-Free Flame-Retardant Flexible Polyurethane Foam with a Novel Nitrogen–Phosphorus Flame Retardant
Chen, M., Shao, Z., Wang, X., Chen, L., & Wang, Y. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301004d · Cited by 225
Persistently flame-retardant flexible polyurethane foams by a novel phosphorus-containing polyol
Rao, W., Xu, H., Xu, Y., Qi, M., Liao, W., Xu, S., & Wang, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.013 · Cited by 214
TGA/FTIR studies of segmented aliphatic polyurethanes and their nanocomposites prepared with commercial montmorillonites
Cervantes‐Uc, J. M., Moo-Espinosa, J., Cauich-Rodríguez, J. V., Ávila‐Ortega, A., Vázquez‐Torres, H., Marcos-Fernández, Á. A., & Román, J. S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.06.022 · Cited by 182
Hyperbranched polyurethane as novel solid–solid phase change material for thermal energy storage
Cao, Q., & Liu, P. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.07.020 · Cited by 167
Microstructure and properties of polyurethanes derived from castor oil
Corcuera, M. Á., Rueda, L., Fernández–d’Arlas, B., Arbelaiz, A., Marieta, C., Mondragòn, I., & Eceiza, A. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.03.001 · Cited by 170
Investigation of the thermal degradation of polyurea: The effect of ammonium polyphosphate and expandable graphite
Awad, W. H., & Wilkie, C. A. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.033 · Cited by 162
Carbonaceous fillers for shape memory actuation of polyurethane composites by resistive heating
Gunes, I. S., Jimenez, G. A., & Jana, S. C. (2009) · Carbon · doi:10.1016/j.carbon.2008.11.053 · Cited by 161
Properties of bulk-polymerized thermoplastic polyurethane nanocomposites
Pattanayak, A., & Jana, S. C. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.021 · Cited by 157
Synthesis of chain-extended organifier and properties of polyurethane/clay nanocomposites
Choi, W. J., Kim, S. H., Kim, Y. J., & Kim, S. C. (2004) · Polymer · doi:10.1016/j.polymer.2004.06.033 · Cited by 157
Synergistic effect of metal oxides on the flame retardancy and thermal degradation of novel intumescent flame‐retardant thermoplastic polyurethanes
Lin, M., Li, B., Li, Q., Li, S., & Zhang, S. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33759 · Cited by 156
Morphology control of segmented polyurethanes by crystallization of hard and soft segments
Hood, M. A., Wang, B., Sands, J. M., Scala, J. J. L., Beyer, F. L., & Li, C. Y. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.027 · Cited by 155
Inherently Flame-Retardant Flexible Polyurethane Foam with Low Content of Phosphorus-Containing Cross-Linking Agent
Chen, M., Chen, C.-R., Tan, Y. L., Huang, J.-Q., Wang, X., Chen, L., & Wang, Y. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4036753 · Cited by 151
The effect of nano‐sized silicate layers from montmorillonite on glass transition, dynamic mechanical, and thermal degradation properties of segmented polyurethane
Tien, Y. I., & Wei, K. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11086 · Cited by 149
Effect of polyol structure and molecular weight on the thermal stability of segmented poly(urethaneureas)
Wang, T.-L., & Hsieh, T. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00130-9 · Cited by 145
Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: I. Elastomers
Narine, S. S., Kong, X., Bouzidi, L., & Sporns, P. (2006) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-006-1006-4 · Cited by 142
Functionalized Low Defect Graphene Nanoribbons and Polyurethane Composite Film for Improved Gas Barrier and Mechanical Performances
Xiang, C., Cox, P. J., Kukovecz, Á., Genorio, B., Hashim, D. P., Yan, Z., Peng, Z., Hwang, C.-C., Ruan, G., Samuel, E. L. G., et al. (2013) · ACS Nano · doi:10.1021/nn404843n · Cited by 141
Review on the Functional Determinants and Durability of Shape Memory Polymers
Pretsch, T. (2010) · Polymers · doi:10.3390/polym2030120 · Cited by 138
Novel polyurethane produced from canola oil based poly(ether ester) polyols: Synthesis, characterization and properties
Kong, X., Liu, G., & Curtis, J. M. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.08.012 · Cited by 134
Simultaneous Reinforcing and Toughening of Polyurethane via Grafting on the Surface of Microfibrillated Cellulose
Yao, X., Qi, X., He, Y., Tan, D., Chen, F., & Fu, Q. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4056694 · Cited by 121
Preparation, characterization and applicability of cellulose acetate–polyurethane blend membrane in separation techniques
Zavastin, D. E., Crețescu, I., Bezdadea, M., Bourceanu, M., Drăgan, M., Lisă, G., Mangalagiu, I. I., Vasić, V., & Savić, J. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.08.058 · Cited by 109
Enhanced thermal stability of biomedical thermoplastic polyurethane with the addition of cellulose nanocrystals
Liu, J., Martin, D. J., Moon, R. J., & Youngblood, J. P. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41970 · Cited by 105
The effect of different siloxane chain-extenders on the thermal degradation and stability of segmented polyurethanes
Chuang, F., Tsen, W., & Shu, Y. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.10.002 · Cited by 97
Open-cell polyurethane foams of very low density modified with various palm oil-based bio-polyols in accordance with cleaner production
Polaczek, K., Kurańska, M., Auguścik, M., Prociak, A., & Ryszkowska, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.125875 · Cited by 93
A reactive phosphorus-containing polyol incorporated into flexible polyurethane foam: Self-extinguishing behavior and mechanism
Rao, W., Zhu, Z., Wang, S.-X., Wang, T., Tan, Y. L., Liao, W., Zhao, H., & Wang, Y. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.04.029 · Cited by 92
Effect of diisocyanate structure on the properties and microstructure of polyurethanes based on polyols derived from renewable resources
Corcuera, M. Á., Rueda, L., Saralegi, A., Martín, M. D., Fernández–d’Arlas, B., Mondragòn, I., & Eceiza, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34781 · Cited by 90
Kinetic triplet determination and modified mechanism function construction for thermo-oxidative degradation of waste polyurethane foam using conventional methods and distributed activation energy model method
Li, M., Jiang, L., He, J.-J., & Sun, J. (2019) · Energy · doi:10.1016/j.energy.2019.03.032 · Cited by 87
Structural characterization, thermal and mechanical properties of polyurethane/CoAl layered double hydroxide nanocomposites prepared via in situ polymerization
Guo, S., Zhang, C., Peng, H.-D., Wang, W., & Liu, T. X. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.12.001 · Cited by 87
Preparation and characterization of high-specific-surface-area activated carbons from K2CO3-treated waste polyurethane
Hayashi, J., Yamamoto, N., Horikawa, T., Muroyama, K., & Gomes, V. G. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.08.092 · Cited by 86
Preparation and properties of amino-terminated anionic waterborne-polyurethane–silica hybrid materials through a sol–gel process in the absence of an external catalyst
Yeh, J., Yao, C.-T., Hsieh, C., Yang, H., & Wu, C. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.06.040 · Cited by 86
Thermal Aging Effect on Mechanical Properties of Polyurethane
Tcharkhtchi, A., Farzaneh, S., Abdallah-Elhirtsi, S., Esmaeillou, B., Nony, F., & Baron, A. (2014) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2014.932644 · Cited by 84
Thermal degradation of poly(siloxane-urethane) copolymers
Chuang, F., Tsi, H., Chow, J., Tsen, W., Shu, Y., & Jang, S. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.07.029 · Cited by 82
Degradation of segmented poly(etherurethane) Tecoflex® induced by electron beam irradiation: Characterization and evaluation
Guignot, C., Betz, N., Legendre, B., Le Moel, A., & Yagoubi, N. (2001) · Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(01)00850-3 · Cited by 81
The effects of the structure and molecular weight of the macrodiol on the properties polyurethane anionic adhesives
Cakić, S. M., Ristić, I., Marinović-Cincović, M. T., & Špírková, M. (2012) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2012.11.001 · Cited by 81
Thermal degradation study of pure rigid polyurethane in oxidative and non-oxidative atmospheres
He, J.-J., Jiang, L., Sun, J., & Lo, S. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.05.015 · Cited by 81
FTIR studies on the compatibility of hard–soft segments for polyurethane–imide copolymers with different soft segments
Liu, J., Ma, D., & Li, Z. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(01)00247-6 · Cited by 77
Thermal degradation and stability of HTPB-based polyurethane and polyurethaneureas
Gupta, T., & Adhikari, B. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(02)00571-3 · Cited by 76
Thermo-oxidative degradation of phosphorus-containing polyurethane
Chang, T. C., Shen, W., Chiu, Y. S., & Ho, S. Y. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(95)00116-4 · Cited by 76
Antibacterial activity and cytocompatibility of chitooligosaccharide-modified polyurethane membrane via polydopamine adhesive layer
Luo, C., Liu, W., Luo, B., Tian, J., Wen, W., Liu, M., & Zhou, C. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.036 · Cited by 76
Effect of nanoclays on physico-mechanical properties and adhesion of polyester-based polyurethane nanocomposites: structure–property correlations
Maji, P. K., Guchhait, P. K., & Bhowmick, A. K. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3827-7 · Cited by 74
Synthesis of Cardanol-Based Polyols via Thiol-ene/Thiol-epoxy Dual Click-Reactions and Thermosetting Polyurethanes Therefrom
Wang, H., & Zhou, Q. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02423 · Cited by 74
Crystallization and thermal properties in waterborne polyurethane elastomers: Influence of mixed soft segment block
Cakić, S. M., Ristić, I., Krakovský, I., Stojiljković, D. T., Bělský, P., & Kollová, L. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.12.008 · Cited by 71
UV-curable coating crosslinked by a novel hyperbranched polyurethane acrylate with excellent mechanical properties and hardness
Zhang, Q., Huang, C., Wang, H., Hu, M., Li, H., & Liu, X. (2016) · RSC Advances · doi:10.1039/c6ra21081c · Cited by 71
High-performance polyurethane nanocomposites based on UPy-modified cellulose nanocrystals
Tian, D., Wang, F., Yang, Z., Niu, X., Wu, Q., & Sun, P. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.029 · Cited by 70
Electrospun Polyethylene Glycol/Polyvinyl Alcohol Composite Nanofibrous Membranes as Shape-Stabilized Solid–Solid Phase Change Materials
Huang, J., Yu, H., Abdalkarim, S. Y. H., Marek, J., Militký, J., Li, Y., & Yao, J. (2020) · Advanced Fiber Materials · doi:10.1007/s42765-020-00038-8 · Cited by 70
Nature and properties of ionomer assemblies. II
Capek, I. (2005) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2005.06.005 · Cited by 70
Thermal degradation and ageing of segmented polyamides
Ghosh, S., Khastgir, D. K., Bhowmick, A. K., & Mukunda, P. G. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00141-x · Cited by 69
The Influence of Soft Segment Structure on the Properties of Polyurethanes
Ristić, I., Cakić, S. M., Vukić, N., Teofilović, V., Tanasić, J., & Pilić, B. (2023) · Polymers · doi:10.3390/polym15183755 · Cited by 68
Preparation, characterization and antifouling properties of polyacrylonitrile/polyurethane blend membranes for water purification
Panda, S. R., & De, S. (2015) · RSC Advances · doi:10.1039/c5ra00736d · Cited by 68
Analysis of thermal degradation of diacetylene-containing polyurethane copolymers
Chuang, F. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.02.020 · Cited by 68
Synthesis of graphene–polyurethane nanocomposite using highly functionalized graphene oxide as pseudo-crosslinker
Kumar, M., Chung, J. S., Kong, B., Kim, E. J., & Hur, S. H. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.05.059 · Cited by 68
Rigid polyurethane foams from a polyglycerol-based polyol
Piszczyk, Ł., Strankowski, M., Danowska, M., Hejna, A., & Haponiuk, J. T. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.05.012 · Cited by 68
Synthesis and characterisation of polyurethane elastomers with semi-products obtained from polyurethane recycling
Trzebiatowska, P. J., Calvo‐Correas, T., Eceiza, A., & Datta, J. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.063 · Cited by 68
Pulverization of rubber granulates using the solid state shear extrusion process
Bilgili, E. A., Arastoopour, H., & Bernstein, B. M. (2001) · Powder Technology · doi:10.1016/s0032-5910(00)00383-1 · Cited by 68
Natural fillers as reinforcement for closed-molded polyurethane foam plaques: Mechanical, morphological, and thermal properties
Husainie, S. M., Deng, X., Ghalia, M. A., Robinson, J., & Naguib, H. E. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102187 · Cited by 67
Synthesis, rheological, and thermal properties of waterborne hyperbranched polyurethane acrylate dispersions for UV curable coatings
Asif, A., Hu, L., & Shi, W. (2009) · Colloid & Polymer Science · doi:10.1007/s00396-009-2062-8 · Cited by 67
Thermal stability of chemically crosslinked moisture‐cured polyurethane coatings
Chattopadhyay, D. K., Sreedhar, B., & Raju, K. V. S. N. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21404 · Cited by 67
Thermogravimetric study for polyurethane materials for biomedical applications
Filip, D., Macocinschi, D., & Vlad, S. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.04.050 · Cited by 66
Biodegradability of crude glycerol-based polyurethane foams during composting, anaerobic digestion and soil incubation
Gómez, E. F., Luo, X., Li, C., Michel, F. C., & Li, Y. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.008 · Cited by 66
Synthesis and properties of polyurethane resins based on liquefied wood
Wei, Y., Cheng, F., Li, H., & Yu, J. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20023 · Cited by 64
Study on synthesis and thermal properties of polyurethane–imide copolymers with multiple hard segments
Liu, J., & Ma, D. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10421 · Cited by 64
Synthesis of disyndiotactic polylactide
Bero, M., ski, P. D., & Kasperczyk, J. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19991115)37:22 · Cited by 50
Oxidized carbon nanofiber/polymer composites prepared by chaotic mixing
Jiménez, G., & Jana, S. C. (2007) · Carbon · doi:10.1016/j.carbon.2007.05.015 · Cited by 63
Thermogravimetric study of phosphated polyurethane ionomers
Mequanint, K., Sanderson, R. D., & Pasch, H. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00088-5 · Cited by 62
The varying mass ratios of soft and hard segments in waterborne polyurethane films: Performances of thermal conductivity and adhesive properties
Li, R., Loontjens, J. A., & Shan, Z. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.01.025 · Cited by 61
Degradation of phosphorus-containing polyurethanes
Chang, T. C., Chiu, Y. S., Chen, H.-Y., & Ho, S. Y. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(94)00135-9 · Cited by 61
Synthesis of polyurethane-imide (PU-imide) copolymers with different dianhydrides and their properties
Lin, M.-F., Shu, Y., Tsen, W., & Chuang, F. (1999) · Polymer International · doi:10.1002/(sici)1097-0126(199906)48:6 · Cited by 60
UV-curable low-surface-energy fluorinated poly(urethane-acrylate)s for biomedical applications
Lin, Y. H., Liao, K. H., Chou, N., Wang, S., Chu, S., & Hsieh, K. H. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.06.030 · Cited by 60
A Novel Approach for Synthesis of Zwitterionic Polyurethane Coating with Protein Resistance
Wang, C., Ma, C., Mu, C., & Lin, W. J. (2014) · Langmuir · doi:10.1021/la503426e · Cited by 61
Effect of ground tire rubber on structural, mechanical and thermal properties of flexible polyurethane foams
Piszczyk, Ł., Hejna, A., Formela, K., Danowska, M., & Strankowski, M. (2014) · Iranian Polymer Journal · doi:10.1007/s13726-014-0301-4 · Cited by 59
UV curable waterborne polyurethane acrylate dispersions based on hyperbranched aliphatic polyester: effect of molecular structure on physical and thermal properties
Asif, A., & Shi, W. (2004) · Polymers for Advanced Technologies · doi:10.1002/pat.528 · Cited by 59
Synthesis and characterization of polyurethane/organo-montmorillonite nanocomposites
Salahuddin, N., Abo-El-Enein, S. A., Selim, A., & El-Dien, O. S. (2009) · Applied Clay Science · doi:10.1016/j.clay.2009.10.017 · Cited by 58
Poly(ionic liquid)s as efficient catalyst in transformation of CO2 to cyclic carbonate
Rojas, M. F., Bernard, F. L., Aquino, A. S., Borges, J. V., Vecchia, F. D., Menezes, S. C., Ligabue, R. A., & Einloft, S. (2014) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2014.05.007 · Cited by 66
Structure and mechanical properties of shape memory polyurethane based on hyperbranched polyesters
Cao, Q., & Liu, P. (2006) · Polymer Bulletin · doi:10.1007/s00289-006-0650-z · Cited by 56
Synthesis and characterization of a novel fluorinated waterborne polyurethane
Wen, J., Sun, Z., Fan, H., Chen, Y., & Yan, J. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.02.029 · Cited by 56
Primary thermal degradation effects on the polyurethane film
Sui, H., Ju, X., Liu, X., Cheng, K., Luo, Y., & Zhong, F. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.11.021 · Cited by 54
Halogen‐free flame‐retardant waterborne polyurethane with a novel cyclic structure of phosphorus−nitrogen synergistic flame retardant
Gu, L., Ge, Z., Huang, M., & Luo, Y. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41288 · Cited by 53
Carbon Nanotube Multilayer Nanocoatings Prevent Flame Spread on Flexible Polyurethane Foam
Holder, K. M., Cain, A. A., Plummer, M. G., Stevens, B. E., Odenborg, P. K., Morgan, A. B., & Grunlan, J. C. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500327 · Cited by 53
Pulverization of rubber granulates using the solid-state shear extrusion (SSSE) process:
Bilgili, E. A., Arastoopour, H., & Bernstein, B. M. (2001) · Powder Technology · doi:10.1016/s0032-5910(00)00353-3 · Cited by 53
High solid and high performance UV cured waterborne polyurethanes
Jung, D. H., Kim, E. Y., Kang, Y. S., & Kim, B. K. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.08.046 · Cited by 52
Thermal degradation behavior and flammability of polyurethanes blended with poly(bispropoxyphosphazene)
Wang, P.-S., Chiu, W., Chen, L., Denq, B., Don, T., & Chiu, Y. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00070-1 · Cited by 52
Synthesis and characterization of organically modified attapulgite/polyurethane nanocomposites
Wang, C., Auad, M. L., Marcovich, N. E., & Nutt, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28254 · Cited by 52
Degradation Studies of Polyurethanes Based on Vegetable Oils. Part 2. Thermal Degradation and Materials Properties
Rus, A. Z. M., Kemp, T. J., & Clark, A. J. (2009) · Progress in Reaction Kinetics and Mechanism · doi:10.3184/146867809x425749 · Cited by 50
Optimizing the lignin based synthesis of flexible polyurethane foams employing reactive liquefying agents
Bernardini, J., Anguillesi, I., Coltelli, M., Cinelli, P., & Lazzeri, A. (2015) · Polymer International · doi:10.1002/pi.4905 · Cited by 50
TG-FTIR study of the thermal degradation of polyoxymethylene (POM)/thermoplastic polyurethane (TPU) blends
Pielichowski, K., & Leszczyńska, A. (2004) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/b:jtan.0000046124.19405.aa · Cited by 50
Development and evaluation of self-polishing urethane coatings with tethered quaternary ammonium biocides
Coneski, P. N., Weise, N. K., Fulmer, P. A., & Wynne, J. H. (2013) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2013.04.012 · Cited by 50
Surface and mechanical properties of waterborne polyurethane films reinforced by hydroxyl-terminated poly(fluoroalkyl methacrylates)
Yang, W. M., Cheng, X., Wang, H., Liu, Y., & Du, Z. (2017) · Polymer · doi:10.1016/j.polymer.2017.11.021 · Cited by 49
CO2 capture: Tuning cation-anion interaction in urethane based poly(ionic liquids)
Bernard, F. L., Polesso, B. B., Cobalchini, F. W., Donato, A. J., Seferin, M., Ligabue, R. A., Chaban, V. V., do Nascimento, J. F., Vecchia, F. D., & Einloft, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.08.095 · Cited by 48
The effect of two‐dimensional d‐Ti 3 C 2 on the mechanical and thermal conductivity properties of thermoplastic polyurethane composites
Wang, X., Wang, L., He, Y., Wu, M., & Zhou, A. (2019) · Polymer Composites · doi:10.1002/pc.25374 · Cited by 48
Effect of silicon and phosphorus on the degradation of polyurethanes
Lin, M.-F., Tsen, W., Shu, Y., & Chuang, F. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010131)79:5 · Cited by 32
Improving Mechanoluminescent Sensitivity of 1,2-Dioxetane-Containing Thermoplastic Polyurethanes by Controlling Energy Transfer across Polymer Chains
Yuan, W., Yuan, Y., Yang, F., Wu, M., & Chen, Y. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01668 · Cited by 47
Biodegradable Poly(ester–urethane–amide)s Based on Poly(ε-caprolactone) and Diamide–Diol Chain Extenders with Crystalline Hard Segments. Synthesis and Characterization
Báez, J. E., Ramírez, D., Valentín, J. L., & Marcos-Fernández, Á. (2012) · Macromolecules · doi:10.1021/ma300990s · Cited by 46
Synthesis and thermal properties of polyurethane–polysiloxane crosslinked polymer networks
Zhu, Q., Feng, S., & Zhang, C. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12790 · Cited by 46
Preparation and characterization of waterborne polyurethane/silica hybrid dispersions from castor oil polyols obtained by glycolysis poly(ethylene terephthalate) waste
Cakić, S. M., Ristić, I., Marinović-Cincović, M. T., Stojiljković, D. T., & Budìnski‐Simendìć, J. (2016) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2016.07.010 · Cited by 45

Authors: Petrović, Z. S., Zavargo, Z., Flyn, J. H., & Macknight, W. J.
Affiliations: University of Novi Sad (RS)
National Institute of Standards and Technology (US)
University of Massachusetts Amherst (US)
Venue: Journal of Applied Polymer Science
Publisher: Wiley
Published: 1994-02-07
Volume: 51
Issue: 6
Pages: 1087-1095
ISSN: 0021-8995 (ISSN-L)
1097-4628
DOI: 10.1002/app.1994.070510615
OpenAlex: W1973937445
Cited by: 404
References: 18
Citations by year: 2026: 14 · 2025: 14 · 2024: 24 · 2023: 17 · 2022: 19 · 2021: 12 · 2020: 12 · 2019: 22 · 2018: 21 · 2017: 19 · 2016: 25 · 2015: 19 · 2014: 21 · 2013: 17 · 2012: 16
FWCI: 2.35
Type: journal article
Language: en
Open access: green
works.bepress.com
Licence: onlinelibrary.wiley.com/termsAndConditions#vor (vor, 3318 d)
Locations: Journal of Applied Polymer Science (publishedVersion)
ScholarWorks@UMassAmherst (University of Massachusetts Amherst) (submittedVersion)
Topics: Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: segmented polyurethanes, thermal degradation, activation energy, soft segment length, degradation kinetics, structure-stability relationship, weight loss

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Thermal degradation of segmented polyurethanes

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks