Cited by 404Thermal and Kinetic AnalysisPolymer Science and PVCPolymer crystallization and properties

The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.

Thermal degradation of segmented polyurethanes

Open access

Petrović, Zoran S., Zavargo, Zoltan, Flyn, Joseph H., Macknight, William J.·1994·Journal of Applied Polymer Science

DOI 10.1002/app.1994.070510615

Open this paper in CoChat — free account Open PDF

Abstract

Abstract Thermal degradation of polyurethane samples was studied by a thermogravimetric method. The effect of soft‐segment length and soft‐segment concentration on activation energy of the degradation process was measured. Three methods of calculation gave activation energies at different stages of the very complex weight loss process. It was shown that at initial stages of the weight loss the process was dominated by hard‐segment degradation. Activation energy of the whole process calculated by the Ozawa–Flynn method did not offer clear insight into the structure–stability relationship of polyurethanes. The second method showed that activation energy of the initial stage of degradation increased with decrease in hard‐segment length. The Flynn method of calculating activation energy produced fairly constant activation energy of the first 40% degradation, at around 150 kJ/mol, for polymers in the C series. Generally, calculation of kinetic parameters of a complex degradation process as in polyurethanes gives results that are not easy to interpret. It has been shown qualitatively that polymers with higher soft‐segment concentration display lower initial weight loss and higher onset temperatures of degradation. © 1994 John Wiley & Sons, Inc.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1002/app.1994.070510615

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

A New Method of Analyzing Thermogravimetric Data
Ozawa, T. (1965) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.38.1881 · Cited by 6,996
A quick, direct method for the determination of activation energy from thermogravimetric data
Flynn, J. H., & Wall, L. A. (1966) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1966.110040504 · Cited by 3,271
Polyurethane elastomers
Petrovìć, Z. S., & Ferguson, J. W. (1991) · Progress in Polymer Science · doi:10.1016/0079-6700(91)90011-9 · Cited by 911
Reliability of methods for determination of kinetic parameters from thermogravimetry and DSC measurements
Petrovìć, Z. S., & Zavargo, Z. Z. (1986) · Journal of Applied Polymer Science · doi:10.1002/app.1986.070320406 · Cited by 99
Self-citation
The Reactions of Isocyanates and Isocyanate Derivatives at Elevated Temperatures
Saunders, J. H. (1959) · Rubber Chemistry and Technology · doi:10.5254/1.3542399 · Cited by 99
Mechanism of thermal degradation of polyurethanes investigated by direct pyrolysis in the mass spectrometer
Ballistreri, A., Foti, S., Maravigna, P., Montaudo, G., & Scamporrino, E. (1980) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1980.170180628 · Cited by 95
Comparative study of various methods for thermogravimetric analysis of polystyrene degradation
Nishizaki, H., Yoshida, K.-I., & Wang, J. H. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070251218 · Cited by 92
Thermal stability of segmented polyurethanes
Ferguson, J. W., & Petrovìć, Z. S. (1976) · European Polymer Journal · doi:10.1016/0014-3057(76)90050-1 · Cited by 89
Mechanism of thermal degradation of polyurethane based on MDI and propoxylated trimethylol propane
Gaboriaud, F., & Vantelon, J. P. (1982) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1982.170200809 · Cited by 83
Initial kinetic parameters from thermogravimetric rate and conversion data
Flynn, J. H., & Wall, L. A. (1967) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1967.110050211 · Cited by 74

Flagged first, then by citations

Show all 18 references

Research works printed but not linked: 8

Stepanyan S. A., 1972, Vysokomol. Soyed. Ser. B, 14, 246
Belyakov V. K., 1971, Vysokomol. Soyed. Ser. A, 13, 1585
Dyer E., 1972, J. Polym. Sci., 8, 1499
Vieweg R., 1966, Kunstoff‐Handbuch, Band VII, Polyurethane, 37
Z.Petrović PhD Thesis University of Strathclyde Glasgow 1974.
Blymenfel'd A. B., 1967, Vysokomol. Soyed., 9, 1587
Ferguson Z. Petrović and J., 1978, Hemijska Indust., 9, 610
Flynn J. H., 1978, Thermal Methods in Polymer Analysis, 163

Sorted by citations

Items 201–300 of 401

Correlating thermal properties of polyurethane/clay nanocomposite coatings with processing
Babar, M., Sharma, A., Kakkar, P., Arora, A., Arora, T., & Verma, G. (2022) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2022.106743 · Cited by 19
Synthesis, Morphology, and Properties of Polyurethane-triazoles by Click Chemistry
Wang, G., Guo, S., & Ding, Y. (2015) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500209 · Cited by 19
Fabrication of Polycaprolactone-Based Polyurethanes with Enhanced Thermal Stability
Džunuzović, J. V., Stefanović, I. S., Džunuzović, E. S., Kovač, T., Malenov, D. P., Basagni, A., & Marega, C. (2024) · Polymers · doi:10.3390/polym16131812 · Cited by 18
Influence of iron content on thermal stability of magnetic polyurethane foams
Zhang, J., Li, L., Chen, G., & Wee, P. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.020 · Cited by 18
Emulsifyable air drying urethane alkyds
Athawale, V. D., & Nimbalkar, R. V. (2009) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2009.09.017 · Cited by 18
Structural and thermal degradation properties of novel metallocene-polyurethanes
Lucio, B., & de la Fuente, J. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.12.008 · Cited by 18
Thermal degradation of reactive polyurethane hot melt adhesive based on MDI
Sun, L., Li, K., Xue, W., & Zeng, Z. (2017) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2017.1408184 · Cited by 18
Highly efficient polyurethane membrane based on nanocomposite of sulfonated thiacalix[4]arene-sodium alginate for desalination
Mojerlou, F., Lakouraj, M. M., Barikani, M., & Mohammadi, A. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.066 · Cited by 18
Investigations of Flame-Retarded Thermoplastic Poly(imide–urethane)s with Intumescent Flame Retardants
Tang, Q., Yang, R., Song, Y. J., & He, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500651t · Cited by 18
Glycolysis Recycling of Waste Polyurethane Rigid Foam Using Different Catalysts
Gu, X., Luo, H., Lv, S., & Chen, P. (2021) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2021.014876 · Cited by 17
Designing New Sustainable Polyurethane Adhesives: Influence of the Nature and Content of Diels–Alder Adducts on Their Thermoreversible Behavior
Quiles‐Díaz, S., Seyler, H., Ellis, G., Shuttleworth, P. S., Flores, A., Gómez‐Fatou, M. A., & Salavagione, H. J. (2022) · Polymers · doi:10.3390/polym14163402 · Cited by 17
Magnolol-based sustainable, high-strength, shape-memory, transparency, and UV-shielding thermosetting polyurethane networks
Zhai, Y., Zhang, D., & Gao, L. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112767 · Cited by 17
New multi-block isophorone diisocyanate-based copolymers with urethane urea hard segments
Терешатов, В. В., Внутских, Ж. А., Slobodinyuk, A. I., Makarova, M., & Senichev, V. Y. (2015) · Journal of Elastomers & Plastics · doi:10.1177/0095244315576240 · Cited by 17
Rigid Polyurethane Foams Modified with Ground Tire Rubber - Mechanical, Morphological and Thermal Studies
Piszczyk, Ł., Hejna, A., Formela, K., Danowska, M., & Strankowski, M. (2015) · Cellular Polymers · doi:10.1177/026248931503400201 · Cited by 17
Thermoplastic polyurethane/polytetrafluoroethylene/bridged dopo derivative composites: Flammability, thermal stability, and mechanical properties
Zhou, Y. P., He, W., Wang, N., Xu, D., Chen, X., He, M., & Guo, J. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25157 · Cited by 17
Preparation of polyurethane-acrylate and silica nanoparticle hybrid composites by a free radical network formation method
Nemati, H., Roghani‐Mamaqani, H., & Salami‐Kalajahi, M. (2019) · Bulletin of Materials Science · doi:10.1007/s12034-019-1917-y · Cited by 17
Synthesis and Characterization of a Sterically Stabilized Polyelectrolyte Using Isophorone Diisocyanate as the Coupling Reagent
Shen, Y., Deng, J., Luo, X., Zhang, X., Zeng, X., Feng, M., & Pan, S. (2009) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856209x452962 · Cited by 17
Chemical hybridization of imidized waterborne polyurethane with silica particle
Jung, D. H., Jeong, M. A., Jeong, H. M., & Kim, B. K. (2010) · Colloid & Polymer Science · doi:10.1007/s00396-010-2279-6 · Cited by 17
Thermooxidative stability of different polyurethanes evaluated by isothermal and dynamic methods
Fambri, L., Pegoretti, A., Gavazza, C., & Penati, A. V. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1544 · Cited by 17
Thermal and crystalline properties of water‐borne polyurethanes based on IPDI, DMPA, and PEBA/HNA
Zhang, S., Jiang, H., Xu, Y., & Zhang, D. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25129 · Cited by 17
Aspects of polyesterurethane interaction with metallic ions
Moroi, G., & Ciobanu, C. (2002) · Thermochimica Acta · doi:10.1016/s0040-6031(01)00713-4 · Cited by 17
Preparation and characterization of crosslinked polyurethane‐ block ‐poly(trifluoropropylmethyl)siloxane elastomers with potential biomedical applications
Shi, Z. (2013) · Polymer International · doi:10.1002/pi.4428 · Cited by 16
Synergistic Effects in Thermoplastic Polyurethanes Incorporating Hybrid Carbon Nanofillers
Yuan, D., Pedrazzoli, D., & Manas‐Zloczower, I. (2016) · International Polymer Processing · doi:10.3139/217.3231 · Cited by 16
Facile Fabrication of High-Contrast and Light-Colored Marking on Dark Thermoplastic Polyurethane Materials
Zhang, C., Dai, Y., Lu, G., Cao, Z. H., Cheng, J., Wang, K., Wen, X., Ma, W., Wu, D., & Liu, C. (2019) · ACS Omega · doi:10.1021/acsomega.9b03232 · Cited by 16
Effect of the cyclic structure content on aliphatic polycarbonate-based polyurethane
Wu, Y.-H., Wang, C., & Chen, C. (2021) · Polymer Journal · doi:10.1038/s41428-021-00462-6 · Cited by 16
The Influence of the Hydroxyl Type on Crosslinking Process in Cyclodextrin Based Polyurethane Networks
Peptu, C., Diaconu, A.-D., Danu, M., Peptu, C. A., Cristea, M., & Harabagiu, V. (2022) · Gels · doi:10.3390/gels8060348 · Cited by 16
Strong process-structure interaction in stoveable poly(urethane-urea) aligned carbon nanotube nanocomposites
Gair, J. L., Lambeth, R. H., Cole, D. P., Lidston, D. L., Stein, I. Y., Kalfon‐Cohen, E., Hsieh, A. J., Bruck, H. A., Bundy, M. L., & Wardle, B. L. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.02.011 · Cited by 16
Development of direct contact-killing non-leaching antimicrobial polyurethanes through click chemistry
Peng, K., Dai, X., Mao, H., Zou, H., Yang, Z., Wei-ping, T., & Hu, J. (2018) · Journal of Coatings Technology and Research · doi:10.1007/s11998-018-0068-1 · Cited by 16
Aspects of polyesterurethane interaction with metallic ions. III. Thermal behavior of polyurethane interaction products with iron and chromium ions
Moroi, G., & Ciobanu, C. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00097-9 · Cited by 16
Synthesis and mesomorphism of thermotropic liquid crystalline polyurethanes based on meta-diisocyanates with 4,4′-bis(ω-hydroxyalkoxy) biphenyls
Lin, C.-K., Kuo, J., & Chen, C. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00164-0 · Cited by 16
Synthesis, Thermal and Mechanical Properties of Nonisocyanate Thermoplastic Polyhydroxyurethane Nanocomposites with Cellulose Nanocrystals and Chitin Nanocrystals
Wijeratne, P. M., Ocando, C., Grignard, B., Berglund, L. A., Raquez, J., & Zhou, Q. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00113 · Cited by 15
Characterization of antioxidant Houttuynia cordata extracts loaded polyurethane nanofibers
Chen, M. X., Haider, M. K., Kim, I. S., & Lee, J.-S. (2023) · Fashion and Textiles · doi:10.1186/s40691-023-00333-z · Cited by 15
Pretreated cellulose fiber for enhancing fire resistance of flexible polyurethane foam composites with reinforced properties
Liang, J. Y., Zhou, T., Fu, Y., Tian, G., Zhang, Y., & Wang, Z. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117429 · Cited by 15
Fabricating coconut palm-based rigid polyurethane foam with enhanced compressive strength using biomass waste
Zhang, T.-T., Lin, C., Li, J., Li, Y.-J., & Xu, S.-Y. (2024) · Polymer · doi:10.1016/j.polymer.2024.127472 · Cited by 15
Strategy for kinetic parameter estimation—Thermal degradation of polyurethane elastomers
Agić, A., & Bajsić, E. G. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25040 · Cited by 15
Eugenol-Based High-Strength and Toughness Shape Memory Poly(urethane thioether) Networks as Intrinsic UV-Shielding Devices
Zhai, Y., Zhang, D., & Gao, L. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00615 · Cited by 14
Polyurethane ionomers based on amino ethers of ortho -phosphoric acid
Муллаяновна, Д. И., Sazonov, O. O., Fazlyev, A. R., Davletbaev, R. S., Vladimirovich, E. S., & Klochkov, V. V. (2019) · RSC Advances · doi:10.1039/c9ra03636a · Cited by 14
Enhanced heat stability and storage modulus in novel PTMO-intercalated clay platelets/PTMO-based polyurethane nanocomposites
Behniafar, H., Ahmadi-khaneghah, A., & Yazdi, M. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1097-z · Cited by 14
Asynchronous synthesis method of waterborne polyurethane with the differences of structural features and thermal conductivity
Li, R., & Shan, Z. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1577-4 · Cited by 14
Thermal degradation of POSS-containing nanohybrid linear polyurethanes based on 1,6-hexamethylene diisocyanate
Ozimek, J., Sternik, D., Radzik, P., Hebda, E., & Pielichowski, K. (2021) · Thermochimica Acta · doi:10.1016/j.tca.2020.178851 · Cited by 14
Polydimethylsiloxane‐based Polyurethane/cellulose Nanocrystal Nanocomposites: From Structural Properties Toward Cytotoxicity
Khadivi, P., Salami‐Kalajahi, M., Roghani‐Mamaqani, H., & Sofla, R. L. M. (2021) · Silicon · doi:10.1007/s12633-021-00970-3 · Cited by 14
Sequence of Monomers and Position of Stereocenters Matter for Thermal Properties of Stereocontrolled Oligourethanes
Forysiak, W., Lizak, A., & Szweda, R. (2024) · ChemPhysChem · doi:10.1002/cphc.202400366 · Cited by 13
Glutathione-responsive biodegradable poly(urea-urethane)s containing L-cystine-based chain extender
Wang, J., Zheng, Z., Chen, L., Tu, X., & Wang, X. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.722432 · Cited by 14
Synthesis of multi-thiol functionalized polylactic acid, polyhydroxybutyrate and polycaprolactone
Belkhir, K., Shen, H., Chen, J., Jégat, C., & Taha, M. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.02.025 · Cited by 13
Sugar-Based Thermoplastic Polyhydroxyurethanes: Effects of Sorbitol and Mannitol Diastereomers on Polymer Properties and Applications in Melt Blending
Younes, G. R., Kamel, M., Titi, H. M., Farkhondehnia, M., & Marić, M. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00673 · Cited by 13
Thermogravimetric Analysis of Composites Obtained from Polyurethane and Rubber Waste
Sułkowski, W. W., Bartecka, G., Sułkowska, A., Maślanka, S., Borek, J., & Moczyński, M. (2012) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421406.2012.635907 · Cited by 13
The effect of acrylate on structure and properties of waterborne polyurethane porous coated fabrics
Zheng, G., Lu, M., Rui, X., & Sun, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45783 · Cited by 13
Phase transition and domain morphology of siloxane‐containing hard‐segmented polyurethane copolymers
Tsen, W., & Chuang, F. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23087 · Cited by 13
Preparation and characterization of rigid polyurethane foams with carbamide and borate groups
Zarzyka, I. (2016) · Polymer International · doi:10.1002/pi.5198 · Cited by 13
Biopolyurethane coatings with silica-titania microspheres (MICROSCAFS®) as functional filler for corrosion protection
Silva, T. A. R., Marques, A. C., Shakoor, A., Montemor, M. F., & Taryba, M. G. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.131376 · Cited by 12
Glutathione-responsive biodegradable polyurethanes based on dithiodiundecanol
Wang, J., Sun, P., Zheng, Z., Wang, F., & Wang, X. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.07.041 · Cited by 12
Investigation on novel thermoplastic poly(urethane-thiourea-imide)s with enhanced chemical and heat resistance
Kausar, A., Zulfiqar, S., Yavuz, C. T., & Sarwar, M. I. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.03.017 · Cited by 12
Harnessing Enhanced Flame Retardancy in Rigid Polyurethane Composite Foams through Hemp Seed Oil-Derived Natural Fillers
Ahir, M., Bodhak, C., & Gupta, R. K. (2024) · Polymers · doi:10.3390/polym16111584 · Cited by 12
UV-curing of hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion and TGA/FTIR study of cured films
Gao, Q., Li, H., & Zeng, X. (2012) · Journal of Central South University · doi:10.1007/s11771-012-0973-x · Cited by 12
Synthesis and characterization of thermally stable poly(urethane–imide)s based on novel diols-containing imide and alkynyl groups
Tang, Q., Ai, Q., He, J., Li, X., & Yang, R. (2013) · High Performance Polymers · doi:10.1177/0954008313486280 · Cited by 12
Structure–property relationship of sodium deoxycholate based poly(ester ether)urethane ionomers for biomedical applications
Filip, D., Macocinschi, D., Vlad, S., Lisă, G., Cristea, M., & Zaltariov, M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42921 · Cited by 12
Functional Modification Effect of Epoxy Oligomers on the Structure and Properties of Epoxy Hydroxyurethane Polymers
Строганов, В. Ф., Stoyanov, O. V., Викторович, С. И., & Kraus, E. (2018) · Advances in Materials Science and Engineering · doi:10.1155/2018/6743037 · Cited by 12
Influence of siloxane co-segment length and content of waterborne polysiloxane-urethane copolymers on their water resistance, thermal stability and mechanical properties
Gao, C., Chen, M.-Y., Ni, J.-N., Hua, J.-J., Xu, X., Lin, W.-W., & Zheng, Q. (2010) · Chinese Journal of Polymer Science · doi:10.1007/s10118-010-8251-6 · Cited by 12
Thermal behaviour of polyurethane interaction products with cobalt ions
Moroi, G., & Ciobanu, C. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00173-8 · Cited by 12
Transparent Superhydrophobic Coatings of Silica Nanoparticles Using Functionalized Polyurethanes
Sheyara, R. T. B., Ramar, P., Satheeshkumar, M., Kumar, B. V. N. P., & Samanta, D. (2023) · Chemistry - An Asian Journal · doi:10.1002/asia.202201166 · Cited by 11
Aqueous Cationic Fluorinated Polyurethane for Application in Novel UV-Curable Cathodic Electrodeposition Coatings
Chen, J., Zeng, Z., Liu, C., Wang, X., Li, S., Ye, F., Li, C., & Guan, X. (2023) · Polymers · doi:10.3390/polym15183725 · Cited by 11
Fire-Retardant Flexible Foamed Polyurethane (PU)-Based Composites: Armed and Charmed Ground Tire Rubber (GTR) Particles
Kosmela, P., Sałasińska, K., Kowalkowska‐Zedler, D., Barczewski, M., Piasecki, A., Saeb, M. R., & Hejna, A. (2024) · Polymers · doi:10.3390/polym16050656 · Cited by 11
Molecular dynamics, thermo-mechanical and optical studies on benzidine chain extended polyurethane-urea
Oprea, Ș. (2011) · Journal of Polymer Research · doi:10.1007/s10965-011-9584-8 · Cited by 11
Synthesis and Characterization of Novel Chain-Linked Biodegradable Polymers
Gupta, A. P., & Kumar, V. (2010) · Designed Monomers & Polymers · doi:10.1163/138577209x12591392377810 · Cited by 11
Biodegradable and Biocompatible Thermoplastic Poly(Ester-Urethane)s Based on Poly(ε-Caprolactone) and Novel 1,3-Propanediol Bis(4-Isocyanatobenzoate) Diisocyanate: Synthesis and Characterization
Hernández‐Sampelayo, A. R., Navarro, R., González-García, D. M., García‐Fernández, L., Ramírez-Jiménez, R. A., Aguilar, M. R., & Marcos-Fernández, Á. A. (2022) · Polymers · doi:10.3390/polym14071288 · Cited by 12
Thermoplastic zwitterionic elastomer with critical antifouling properties
Wang, K., Arado, T., Huner, A., Seol, H., Liu, X., Wang, H., Hassan, L., Suresh, K., Kim, S., & Cheng, G. (2022) · Biomaterials Science · doi:10.1039/d2bm00190j · Cited by 11
The Impact of Isocyanate Index and Filler Functionalities on the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites
Olszewski, A., Kosmela, P., Piasecki, A., Barczewski, M., & Hejna, A. (2022) · Polymers · doi:10.3390/polym14245558 · Cited by 11
Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting
Petersmann, S., Huemer, M., Hentschel, L., & Arbeiter, F. J. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.107977 · Cited by 11
Synthesis and characterization of a polyurethane ionene/zinc chloride complex with antibacterial properties
Ding, B.-P., Wu, F., Chen, S., Wang, Y., & Zeng, J. (2015) · RSC Advances · doi:10.1039/c4ra15480k · Cited by 11
Synthesis and Characterization of Elastomeric Polyurethane-Laponite Nanocomposite
Mishra, A. K., Chattophadyay, S., Nando, G. B., & Devadoss, E. (2008) · Designed Monomers & Polymers · doi:10.1163/156855508x328103 · Cited by 11
Controlling Energy Dissipation during Deformation by Selection of the Hard-Segment Component for Thermoplastic Polyurethanes
Liu, X., Ding, S., Wang, F., Shi, Y., Wang, X., & Wang, Z. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01018 · Cited by 10
Cellulose nanocrystal reinforced acylglycerol-based polyurethane foams
Gangoiti, M. V., & Peruzzo, P. J. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2020.52 · Cited by 10
Exploring Soybean Oil-Based Polyol and the Effect of Non-halogenated Flame Retardants in Rigid Polyurethane Foam
Kondaveeti, S., Patel, P., de Souza, F. M., & Gupta, R. K. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03323-4 · Cited by 10
New diurethane plasticizers for polyurethane thermoplastics and perspective functional composites
Терешатов, В. В., & Senichev, V. Y. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41481 · Cited by 10
Thermogravimetric analysis of PVC/NR-b-PU blends
Nair, M. N. R., & Nair, M. R. G. (2010) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-010-1113-1 · Cited by 10
Chloramphenicol-based poly(ester-ether)urethane bioconjugates with antibacterial properties for biomedical applications
Filip, D., Macocinschi, D., Tuchiluş, C., Vlad, S., Zaltariov, M., & Varganici, C. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2064-5 · Cited by 10
Synthesis and characterization of castor oil-based branched polyols from renewable resources and their polyurethane-urea coatings
Allauddin, S., Baidya, K., Nehete, K. M., & Shyamroy, S. (2018) · Journal of Coatings Technology and Research · doi:10.1007/s11998-018-0118-8 · Cited by 10
Thermal and fire behavior of isophorone diisocyanate based polyurethane foams containing conventional flame retardants
Eceiza, I., Barrio, A., Martin, L., Veganzones, M. A., Fernandez-Berridi, M. J., & Irusta, L. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45944 · Cited by 10
Modification of microporous polyurethane elastomers with different types of ash—morphological, mechanical, and thermal studies
Hejna, A., Kosmela, P., Mikicka, M., Danowska, M., & Piszczyk, Ł. (2014) · Polymer Composites · doi:10.1002/pc.23246 · Cited by 10
Thermal properties of poly(urethane-ester-siloxane)s based on hyperbranched polyester
Pergal, M. V., Džunuzović, J. V., Kićanović, M., Vodnik, V. V., Pergal, M., & Jovanović, S. (2011) · Russian Journal of Physical Chemistry A · doi:10.1134/s0036024411130243 · Cited by 9
Choline Chloride/Urea Deep Eutectic Solvents: A Promising Reaction Medium for the Synthesis of Bio-Based Poly(hydroxyurethane)s
Shen, G., & Andrioletti, B. (2022) · Molecules · doi:10.3390/molecules27134131 · Cited by 9
Synthesis, curing, and degradation kinetics of polyurethanes based on poly(ethylene glycol), isosorbide, and pentamethylene diisocyanate
Araújo, A. M., Barreto, J. V. M., Nicácio, P. H. M., de Albuquerque, A. K. C., Silva, I. D. D. S., Ríes, A., & Wellen, R. M. R. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6087 · Cited by 9
Tuning the properties of breathable polyurethanes through chemical crosslinking
Kerketta, A., Meena, M., Dwivedi, S., Yadav, R., & Roy, P. K. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54263 · Cited by 9
Polyurethanes by ring‐opening polymerization initiated from alcohol moiety‐tethering acylazide
Akae, Y., & Théato, P. (2024) · Journal of Polymer Science · doi:10.1002/pol.20240092 · Cited by 9
Effect of soft segment chemistry on marine-biodegradation of segmented polyurethane elastomers
Nguyen, T. V., An, Y., Kusano, Y., Kageoka, M., Feng, S., Padermshoke, A., Masunaga, H., Sasaki, S., & Takahara, A. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.111149 · Cited by 10
The Thermal Degradation of Waterborne Polyurethanes with Catalysts of Different Selectivity
Cakić, S. M., Nikolić, G. S., & Stamenković, J. (2007) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602550601155773 · Cited by 9
Thermal and surface characteristics of some β-cyclodextrin-based side-chain azo amphiphilic polyurethanes
Filip, D., Macocinschi, D., & Grădinaru, L. M. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.017 · Cited by 9
Crosslinked polyurethanes based on hyperbranched polymers
Vukovic, J., Pergal, M. V., Jovanović, S., & Vodnik, V. V. (2008) · Hemijska industrija · doi:10.2298/hemind0806353v · Cited by 9
Compositional elements of thermoplastic polyurethanes for reducing the generation of acetaldehyde during thermo-oxidative degradation
Choi, Y. J., Alagi, P., Jang, J. H., Lee, S. J., Yoon, H. Y., & Hong, S. C. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.025 · Cited by 9
Synthesis and characteristics of poly(ethylene terephthalate) with EO‐PO‐EO triblock copolymers: A thermal and mechanical property study
Mao, H., Hsu, T., Chen, C., Huang, K., & Rwei, S. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51605 · Cited by 9
Supramolecular Polycaprolactone-Based Polyurethanes with Thermally Activated Shape-Memory Behavior
Muscas, F., Sessini, V., Peponi, L., López, A. J., Ureña, A., Navarro, R., & Marcos-Fernández, Á. A. (2022) · Polymers · doi:10.3390/polym14173447 · Cited by 9
Synthesis and electrical, rheological and thermal characterization of conductive polyurethane
Rwei, S., & Wang, L. (2007) · Colloid & Polymer Science · doi:10.1007/s00396-007-1688-7 · Cited by 9
Effects of the o‐aromatic ring in the molecular chain on the properties of polyester polyols
Zhu, Q., Zhang, C., Feng, S., & Chen, J. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.10173 · Cited by 9
High elongation thermoplastic Polyester‐urethanes based on widely available diacid intermediates
Tharcis, M., Badel, T., Jeol, S., Fleury, É., & Méchin, F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43410 · Cited by 9
Chain-extended polyurethane anionomers using ionic diols of varying methylene spacers
Ramesh, S., & Radhakrishnan, G. (1996) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19960715)34:9 · Cited by 9
Optimization of the annealing procedure for thermoplastic polyurethane systems using in situ dynamic mechanical analysis
Bafti, R. R., Flanders, M., & Manas‐Zloczower, I. (2025) · Physics of Fluids · doi:10.1063/5.0254064 · Cited by 8
Synthesis and characterization of polyurethane‐urea clay nanocomposites using montmorillonite modified by oxyethylene–oxypropylene copolymer
Salahuddin, N. A., Abo-El-Enein, S. A., Selim, A., & El-Dien, O. S. (2009) · Polymers for Advanced Technologies · doi:10.1002/pat.1449 · Cited by 8
Effect of chain extender on the mechanical and thermal resistance properties of polyurethane liners for composite propellants
Ross, P., Sevilla, G., & Quagliano, J. (2016) · Polyurethanes · doi:10.1515/polyur-2017-0001 · Cited by 8
Morphology and Thermal Behavior of TPU/PP Blends Modified with Maleic Anhydride Grafted SEBS-g-MA Block Copolymer
Bulatović, V. O., Mihaljević, A., Bajsić, E. G., & Grgurić, T. H. (2017) · International Polymer Processing · doi:10.3139/217.3291 · Cited by 8
Foamed polyurethane plastics of reduced flammability
Zarzyka, I. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45748 · Cited by 8

Authors: Petrović, Z. S., Zavargo, Z., Flyn, J. H., & Macknight, W. J.
Affiliations: University of Novi Sad (RS)
National Institute of Standards and Technology (US)
University of Massachusetts Amherst (US)
Venue: Journal of Applied Polymer Science
Publisher: Wiley
Published: 1994-02-07
Volume: 51
Issue: 6
Pages: 1087-1095
ISSN: 0021-8995 (ISSN-L)
1097-4628
DOI: 10.1002/app.1994.070510615
OpenAlex: W1973937445
Cited by: 404
References: 18
Citations by year: 2026: 14 · 2025: 14 · 2024: 24 · 2023: 17 · 2022: 19 · 2021: 12 · 2020: 12 · 2019: 22 · 2018: 21 · 2017: 19 · 2016: 25 · 2015: 19 · 2014: 21 · 2013: 17 · 2012: 16
FWCI: 2.35
Type: journal article
Language: en
Open access: green
works.bepress.com
Licence: onlinelibrary.wiley.com/termsAndConditions#vor (vor, 3318 d)
Locations: Journal of Applied Polymer Science (publishedVersion)
ScholarWorks@UMassAmherst (University of Massachusetts Amherst) (submittedVersion)
Topics: Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: segmented polyurethanes, thermal degradation, activation energy, soft segment length, degradation kinetics, structure-stability relationship, weight loss

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Thermal degradation of segmented polyurethanes

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks